Express Exterior Review: Wash City Car Wash (Cassel Creek Blvd) | Casselberry, FL

DISCLAIMER: This video may cause epilepsy. Strongly urge you NOT to watch if you suffer from epilepsy, I do apologize.
This express exterior car wash used to be "Pearl Car Wash" built around late 2020 and was completed in July 2021. When it was first built the equipment package was Belanger consisting of Signature Series, SpinLite, and PETIT for the high-pressure arch. After a year unknown decisions took place allowing Wash City to step in and take things over. Very recently was the acquisition, and since then they've installed a whole new package of SONNY's equipment. The removal process of the Belanger equipment and installation process of the SONNY's equipment didn't take long at all. I'd say around a couple of weeks and they were complete.
This store gutted the MiroLogics pay stations/controller, for SONNY's POS/Controls/SmartQueue, and Digital Queue. The tunnel layout consists of a SPYDER-Combo Module with the entrance/exit facing SF-72 Wraps (newest variant), SPYDER Top Brush, OMNI 352 (Electric Drive), Belt Friendly Pivoting Blasters, Secondary SPYDER Top Brush, PYTHON Brush, 5-Manifold Turbo Blasters, Graphene GX4 Application, Rain Repellent, Tire Shine (Electric Drive), and a Top 2K14 Buff'N'Dry (top only).
I rate the final outcome of the wash an 8/10 due to water being left on the front/rear of my vehicle.
LOT: Consisted of VacuTech vacuums, Carpet Mat Cleaners, Microfiber Towels, and Glass/Multi-Purpose Cleaners available for use AFTER your wash. All in all, I would recommend visiting this location, and definitely check out the memberships they have available!

[@DylBuilder1]

The main problem with tunnel washes is the operators. They load cars like 2 feet away from each other and have the conveyor going really fast to process quickly, which lowers the wash quality by a mile. Great Video!

[@CarwashReviewsFlorida]

You're talking to a tunnel attendant and soon-to-be manager here, lol. So, if you have your chemistry dialed in properly, the right amount of mils, etc you won't be lowering quality. Also, many different tunnels have different chain speeds set to work off their chemistry setup. You really have to play around with things when it's a brand-new tunnel, but once you hit the sweet spot, there's no going back. Where I work we have auto-roller where when the back tires roll over the tape switch it automatically fires a roller. I absolutely love it as on busy days like we've had from pollen season now, our car counts are higher and stacking is doable.

[@DylBuilder1]

@@CarwashReviewsFlorida When you load cars so close the brush can’t even go between both of the cars comfortably then you are going to have a huge problem if someone jumps a roller. still will always prefer inbay washes. One near me is VERY clean and they hose the brushes off after almost every car during day.

[@CarwashReviewsFlorida]

@@DylBuilder1 It sends extra rollers after the one for the vehicle is sent, and the wraps do make full contour front and back still. So you like IBAs, nothing wrong with that, but answer this! Can your IBA wash up to 1000+ cars in one day fast and efficiently with no stop, and no wait time? I will give PETIT a point as they are the ONLY IBA I would ever install if I were forced to go with an IBA.

[@DylBuilder1]

@@CarwashReviewsFlorida
But the conveyor doesn’t stop for the spare rollers to hit the tire.
No, but why would I want to spend 500k+ on a full blown tunnel(because if I was going to go tunnel I’d get the fusion, x3 and everything) when I can do 200k on an inbay, wash for the same/ similar price, and earn back my investment faster. I respect your opinion on tunnels though.

[@CarwashReviewsFlorida]

@@DylBuilder1 No hate man, I respect your opinion as well. If you don't mind me asking, what chemistry do you run or plan to run? I am going with either Lustra or QualChem, all depends on the cost though.

[@ndvdul]

i wish i could still see your other videos :(

[@GrammieEllaMaeOh]

Been a long time. Nice content. Contact if ok. News update bout your bro.