heli tips and tricks (feathering shaft, thrust bearings, and dampers)

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ม.ค. 2025

ความคิดเห็น • 18

  • @johncgibson4720
    @johncgibson4720 ปีที่แล้ว

    I am linking this video to my blog post. I have benefited from this video, and I have my videos of FPV helicopter that takes advantage of collective pitch to dive straight down from altitudes. Quadcopters whirl down during a prolonged dive because they can not have attitude correction without spinning up motors that thrusts the quad away from a dive target. So the pilot of a quad becomes very busy thrusting the quad evenly in all directions to keep the craft dive down on target. Helis don't need piloting during the actual dive when GPS coordinates are set correctly.

  • @johncgibson4720
    @johncgibson4720 ปีที่แล้ว

    3:17 I once received a grip with a wrong "In" disk on the "Out" position from Oxy2 helicopter. It didn't happen often. It happened only once to me out of about 10 purchases.

  • @mssippijim
    @mssippijim 9 ปีที่แล้ว

    Great video Freddy. This one is right up there with the Finless Bob videos on setup.

  • @kongeplass
    @kongeplass 12 ปีที่แล้ว

    Very good Freddy, continue with these videos. Very understandable and well done.

  • @MrJr298
    @MrJr298 12 ปีที่แล้ว

    Freddy you are the man!

  • @AndoAus1
    @AndoAus1 12 ปีที่แล้ว

    Great idea! Add me to the list that want to see a video on this please.
    I've got the 3GX set up and flying but the computer side of things is over my head right now.

  • @shadav21
    @shadav21 12 ปีที่แล้ว

    Freddy big up u self, u are the boss and ur vids are awesome, blessings from the caribbean, i wish if you could do a build on the titan x50. i have new kit and its my first nitro hell, need some help with it.

  • @atcoflyer1756
    @atcoflyer1756 4 ปีที่แล้ว +1

    Any tips on removing the control arm bearings?

    • @33forsaken
      @33forsaken  4 ปีที่แล้ว

      usually a bearing press or hand held one will do, or you can apply some heat to the part and give it a few taps. The bearings should pop right out.

  • @owntor1
    @owntor1 2 ปีที่แล้ว

    On my Trex 450x the dampeners give a lot of flex in the main rotors. Is this dangerous? How can I stiffen up the dampening? thanks

  • @aureen01
    @aureen01 12 ปีที่แล้ว

    Hi Freddy , I am a teen flyer that is new to 3gx and I was wondering if maybe u can post a video on how to do a computer 3D 3gx set-up with all the complicated features and settings? Thanks

  • @klemenz
    @klemenz 10 ปีที่แล้ว

    Can you use the black graphite grease on the thrust bearings?

  • @pavotibio
    @pavotibio 12 ปีที่แล้ว

    Thank u, thank u, thank u!!!

  • @andersonl.s
    @andersonl.s 10 ปีที่แล้ว

    Hey freddy,how are you dude? Could you make a tutorial video teaching how to repair align/Futaba... Servos? Actually i have a Futaba S9254 rudder servo with a stripped gear.And perhaps can you also show your radio settings to fly a 600 nitro helicopter just for reference? I bought an align t-rex 600 Nitro,with an OS 50 Hyper,AR7200BX FBL System,Spektrum DX7s Radio.I have no experience with radio settings to fly FBL Helicopters.Tks man :D

    • @33forsaken
      @33forsaken  10 ปีที่แล้ว +1

      yes this could be a great vid :) in progress

  • @33forsaken
    @33forsaken  12 ปีที่แล้ว

    if u ever need any help
    feel free to call me at
    801-654-2803

  • @capsinplace
    @capsinplace 12 ปีที่แล้ว

    Hope ou understand, we are from foreigner not from US.. We might can't contact you.