Bushwacker Pocket Style Fender Flares 1 Year Review
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Bushwacker Pocket Style Fender Flares 1 Year Review
In this video we look at the good and the bad of the Bushwacker Pocket Style Fender Flares after 1 year of ownership. There are definitely some things I need to go over and contact Bushwacker to try and resolve. The Bushwacker Fender Flares are so close to being the perfect add on for all trucks. I may have to do a follow up video on what the conversation was like with Bushwacker. Stay tuned. If you like the content of this video please subscribe, like, and share this video. Also, don't forget to find us on Instagram @Tundra4x4.Club
Some of my upgrades: Click link for fitment and pricing.
Bilstein 6112’s and 5160’s OFFROAD SUSPENSION: amzn.to/2WO93pt
Nfab FRONT BUMPER: amzn.to/2YLGV8i
Nfab RKR RAIL ROCK SLIDERS: amzn.to/2KdSDWc
TEMCO LIGHT BAR: amzn.to/2UHOi1D
SUMOSPRINGS: amzn.to/2I2cIg6
AFE No Oil AIR FILTER: amzn.to/2KbQ4DT
ARB AIR COMPRESSOR: amzn.to/2I3Oj9S
CAMBURG 1.5 inch UNIBALL UCA: amzn.to/2CYDzFI
Bushwacker Fender Flares: amzn.to/2IgRP07
My filming and editing set up.
My favorite camera: amzn.to/2UBHe6v
My best lens: amzn.to/2IfQkPD
ND Filter used: amzn.to/2CUHJyv
My Tri-pod: amzn.to/2YTzNa4
GOPRO HERO 4 Silver: amzn.to/2G63PPt
DJI DRONE: amzn.to/2CYVegE
Adobe Premiere Pro CC: amzn.to/2CZLQsU
Surface Pro Tablet: amzn.to/2VzIHY0
My offroad gear.
Tow Rope bubba rope: amzn.to/2WTAluR
Winch receiver and shackle combo: amzn.to/2Ih2dVt
Air down stem deflater: amzn.to/2WRuZ3g
Air Compressor: amzn.to/2YVG0SH
Fire Extinguisher with mounting bracket: amzn.to/2U0MrjG
Strong and durable Offroad clothing. Click for sizing and price:
5.11 Tan Pant: amzn.to/2TXnFRP
Under armor Tan boot: amzn.to/2I3yzE8
All products listed above I have personally used, owned, or benefited from. Being an Amazon associate, I earn from qualifying purchases at no cost to you.
I had my bushwacker flares installed by the dealership new but with all the offroading and beach riding the rubber grommet traps a ton of sand and dirt on the lip of the grommet. To give me more space with larger 37" tires I had to remove the flares and discovered that all the time offroading and vibrations driving had caused very bad wears were it pretty much went thru the clear coat all the way to the paint layer. I high recommend to not run flares or if not the least check up every month of the grommet and make sure they're clean and not trapping sand and dirt back there.
I do have these flares. My only issue is the rubber seal is not holding tight around the gas cap and the very edge. Other than that I haven’t had any issues.
How do you like that N fab front bumper fit and finish thank you!
Thanks for the review, Im looking at a used vehicle with these and they didnt look flush in the photos, must be a common problem.
When I bought my TSS packaged tundra I took my flares off within the first week. Truck was brand new, and already had paint rub from the flares. Took them off and have left them off.
+Uncle Elroy yup, mine have been off for 6 months now. The Regrets are real.
@@Tundra4x4Club Did it leave permanent damage to the paint or were you able to buff it out? I currently have them installed on my 2018 and am having an issue with the rubber grommet also and one of them is loose. I'm considering taking them off but not if it is going to reveal paint damage I cant fix.
looking into buying a set for my 2019 tundra. thanks for the info.
Flares look very good on the tundra but you need to lay down some type of paint protection film first. If not, overtime they will rub into the paint through the clear coat. Also they
Love to trap dirt and debris behind the flares.
+Subie Jason that’s great point! Thanks for sharing.
I used a 0.30” 3M black pin stripe and laid it down on the wear mark left over years of wear. I noticed it when I removed them to replace my rubber gasket/seal.
Are they really even needed? I have problems spending that much money on a cosmetic plastic upgrade
I don’t own these but from looking at the install video I think that they look really cool but at the end of the day are a very poor design as the rubber gasket will never keep water out and can also collect mud, sand, dirt, and up north in Canada salt. In short order you will have rusting fenders.
In my opinion someone needs to design a metal solution which will hold a tight seal against the existing fender.
+FavStaR69 100 percent agree. Thanks for watching.
What if you plasti dip the area where the rubber goes? Maybe that would protect the paint from being rubbed. I was wondering if you could fill in gap around it also with plasti dip.
Im worried about moister getting between the flare and the Fender. Anyone have issues with that? Rot out rust?
Lol a guy who doesn’t like mud on his truck, I’m in the south and thats what it’s all about, After watching this video I feel like you’re trying to hold Bushwacker over a barrel, I’m sure when you spoke to them about your issues you also just happened to mention the video you made.
I mean I get it, they should stay on your vehicle for more than a year but that approach doesn’t sit very well with me, you’re trying to get free stuff my man.
With that being said, I just bought a truck with the same flares on it that are coming off LOL
BS until 1:38
Skip ahead
Even if they four hundred bucks fender flares are still AutoZone quality b*******
Not subing or liking cause you were annoying about it and pushing your merch