APOLLO Z20‼️ REAL MIKUNI‼️FMF EXHAUST UPGRADES‼️FIRST START‼️🤯😤
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Apollo z20 with real mikuni carb rejetted from 190/main 22.5/pilot to a 200/main 25/pilot, FMF Powercore 2 exhaust upgrade‼️
Fmf Exhaust: FMF Racing PowerCore 2 Shorty Silencer , Color: Natural, Material: Aluminum 022009 www.amazon.com...
Racing Cdi Box: Duokon Racing CDI, 6 Pin Racing CDI Box Ignition Coil for Motorcycle 125cc 150cc 200cc 250cc Pit Bike Scooter ATV www.amazon.com...
Carburetor (real Mikuni): Genuine Real Real Mikuni 26mm Round Slide Carb Carburetor Carb VM26-606 by Niche Cycle Supply www.amazon.com...
Carb (Fake Mikuni): VM22 26m Carburetor with Air... www.amazon.com...
Sprocket (17 tooth direct fit): Wingsmoto Sprocket Front 428-17T... www.amazon.com...
Red Clutch (Foot): Aluminium Red 11mm Hole Gear... www.amazon.com...
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs FS )](http://i.ytimg.com/vi/lD6z1BugdZw/mqdefault.jpg)
Live to ride and ride to live my brother. Enjoy your bike!!!🏆👍💯
Make a video on the throttle pin movement Sir.
“ STAY WOKE “ 😂 Hey this a Dope video!
With respect. Changing the end can wont make any difference to the power. It will only change the sound! Change the header pipe, Change the carb to a Nibi, or a dellorto, Shave 3,000th of the head, advance the timimng, put stronger valve springs in it and convert it from petrol to methanol, then you can expect BIG GAINS in performance.
You a beast brother perfect advice
Nibbi carbs are a pain mikuni is better
bruh who buys a cheap chinese pitbike to put it on methanol LOL. Outa curiosity what gains would you even see?
shaving .003" off the head wont do anything?! Did you mean .030''? Plus did you even do a valve interference test to confirm and what did you get as a result??
You naming off nonsense dawg.... lol
Let’s gooooo🔥🔥Just ordered a Apollo dbx-19 last night! Video soon!
🔥🔥🔥🔥
Dat bih sound good
Nice I’m about to buy one of these brand new and just 2 stroke swap it I got a kx80 motor that’s in my shed from a old snow cart build imma 2 stroke swap it and use the 4 stroke for something else
Kx80 air cool motor
Get it son!! Yeeeah
You still got the bike that thing is badass! Sounds great where did you find the fmf
Nibbi 22mm you would throw that makuni away!
Offt that bike sounds great. Really nice smooth idle to it. Well done ma man
Like the sound of that exhaust nice bike bro🔥🔥
Thanks bro
It's too quiet.
nice now you only need a tune up on the carburetor so i can sound better
As soon as i get mine ill probably upgrade the carb exhaust and a bunch more ima have this bike beating all the name brands😂
Lol no you won't, trust me, I just bought one for my first bike, it's a damn good buy for the money, and perfect for a beginner, but if your gonna dump money into something, might as well buy a name brand bike
@@rokstr222ify ima try to get a name brand but if i dont watch me ill have the fastest apollo
Dope video . Love the upgrades
And i subbed . Look forward to seeing more content
Thanks.. I’ll try to do at least one or two videos a week
@@015187 word , what area are you from? I see leaves on the ground so I assume east coast? I’m in Massachusetts so my riding seasons coming to an end within a few weeks.
@@jimbeezii yea I’m in Michigan, and same here before the snow hits lol
litty...fucking wit it!!! just sub broski i’m thinking about a 250 my damn self..bout to roll the 🎲 on that guy
Sounds beautiful👍👍👍👍🔥
"throttle pin" I think you mean the needle brother. All the way up gives more fuel from the main jet. (200) all the way down gives less fuel from it.
Y do u have a two stroke exhaust
Didn’t know what I was doing at first🤦🏾♂️😂 but it worked just fine lol
Nice
Thanks
Put a 17 front sprocket on it. And a 27.5 jet on the carb....
Gotta get something new.. got hit and had surgery in August but I’m good and ready to start back riding
@@015187 dang, stay strong. I also put a racing cdi on it. That 11hp 55mph... goes out the window when it's all put it on. Pushing way more 💪
That core 2 exhaust just slip right on? I'm thinking about getting that
@@jamesbriley8738 I had to get it welded on lol
Would this be an ok bike for someone 5,1
Yea my girl is 5’3 and I taught her how to ride it
Hey man where did you get the intake maniford ?
Tboltusa
Where you get the air filter? Can't find flat angle
That’s a shift lever
Yo man does it sputter on you at all with this setup? I know my stock carb sputters which I was just going to get a mikuni
Yes it did at first.. I have a better explanation on which carb to get and the best setup for it in my other video on my channel. The $35 Amazon knockoff mikuni works perfect right out of the box.. but you will have to clean the jets in the carb out pretty often
@@015187 if im running non ethanol i should be good but honestly not too worried about cleaning a carb . As long as it runs better than the stock carb cause that shit is wack.
@@joehuff2292 ok well you’ll love the instant difference in power
Did the jet upgrades make a big difference
No they were way too big I had to go down a few sizes
@@015187 what did you end up with
Looking forward to more vids bro 💪🏽
so that knockoff carb pretty much plug and play?
Yea basically
Did you have to do any modifications to put the VM26 in? Looking to get this exact bike with that exact carburetor
If you get the genuine Mikuni you will have to go down a few sizes on you main jet and some on the pilot
How much is this bike
$1099 on x-offroad.com
where you from we need to link so we can ride
I’m in Flint Michigan bro.. but I was in a accident last month and broke my leg.. I’ll be back riding in a couple weeks
I’m about to get this SAME bike. I’m 6.4 250 pounds do you think I can ride this???
Yes but you’ll want to swap the engine or upgrade to a bigger bike after a while.. it’s the perfect starter bike for sure
Where you buying
@@irajames9404 the engine?
Hey man do you got any links to where you got the exhaust
Yes it’s in the description
Howd did the exhaust fit on it was it hard or really easy
@@kylejasper3987 he said he took it to the exhaust shop and had it cut and welded
I have the same exact bike, i can’t seem to find a smaller rear sprocket for it do you have any ideas on what parts cross over from other bikes that would fit?
No but you can call tbolt and they will help you out fasho
Thanks man. Great content by the way
@@cjanderson1192 appreciate that bro
Can you record with your phone horizontal
Is that a full exhaust or just the slip on?
Just the exhaust tip.. I had to take it to a shop to get welded on
@@015187 What's the item number of that?
@@015187 Or maybe a link to it.
@@PrinceIsa honestly you really don’t need it at all for this bike.. yea it gave me a little more power but I realized it wasn’t power that I was lacking for wheelies.. it was skill and technique lol just upgrade the carb, chain, sprocket, brake fluid, cdi box, and the tires for sure.. they have more than enough power
@@015187 yeah. I've done that. I like to know whats replaceable for other riders out there. I'm good with matching up. This whole covid BS makes things a bit difficult. I have one for my son. It's his starter bike. I ride a 2015 KX250F. Its difficult for me to get a full exhaust system for that thing. Just waiting for FMF to restock from back order.
Did you get the slip on fmf exhaust
Where u get the real mikuni air filter from
Also do you have the link for the Jets plz
No I just kept searching on google until I found the right ones
@@015187 Thanks
Bike still doin good ?
Yea.. putting together a new video to upload tonight or by the morning
by the way do you wheelie the 125
Yea but I’m not good at it yet lol
Where did u get that flat angled uni filter?
What position do you have the slide needle?
Where do you have the pin plz need to know thanks
One notch from being all the way open
@@015187 thanks man you’re the best
Why doesn’t have a rev limiter
Anyone know a company t makes new plastics and graphics, for the zmax?
Why u put a 2 stroke exhaust on a 4 😂
Do u happen to know the handlebar size of this bike? What do i need to replace it?
I believe they are 1-1/8 handlebars
@@015187 thanks Man.
@@soheepen5147 no problem bro
I just got this bike and my clutch lever broke. Where did you get your clutch lever?
Amazon
What did you do to the air box to get a regular air filter on it did you leave it open
I completely removed it
@@015187 and what did you do with the breather tube that connected to it
@@project5r680 I have another video on my channel explaining and showing all of my upgrades after that and exactly how I ran the breather tube
I got a genuine mikuni vm26 with a uni filter and it’s bogging. What jetting u think I should run?
Try going under a 90 main
What pipe is that?
Fmf short 2
My nigga💯😂what it top out at wit the upgrade
Hella torquey and can wheelie easily in 1st,2nd, and 3rd gear with the 13 tooth sprocket I put on.. 65mph with that on it. And almost 71with the 17 tooth sprocket
I weigh about 215+
Did it loose it’s low end when u did the sprocket change
@@015187 and what size rear and front sprocket do u have on it?
Yea but not too much I can still lift it up.. I keep the 13 on rn for wheelie practice because I suck lol I still have the stock rear sprocket on for now
does it bog when u completely gun it?
Yes.. that’s the problem I’m tryinna to fix rn.. was gonna post a video tomorrow about it
Not anymore!! I removed the air box and rejetted the carb and now it runs just right
@@015187 yo who should try adjusting the carb
@@burntheprideflag2024 huh?
@@015187 i wanna keep my air box but what carb and what jets did u use?
My Clutch Lever broke too...and leak in gas tank...mannnn
Mines didn’t I just wanted a red one lol and some jb weld should get you right on the gas leak problem
@@015187 yep the welding worked good....
Nice bike! Do u know what handle bars will fit in this bike?
Thanks.. and I’ll show the exact size it comes with and what I’m upgrading to in the next video
1 1/8
@@015187, 1 1/8 at the clamp, taper to 7/8, right?
@@TheRoadhammer379 yes I believe that’s exactly right
Can you add a parts list with link ?
Yes I’m copying and pasting the links in the description right now
I added the links to the description👌🏾
Where did you gwt it from
Got the bike off of xoffroad.com and everything else was from Amazon
bruh which FMF did you buy to fit this?
Fmf racing powercore 2 shorty exhaust.. I had a shop weld it on for me
Yo bro I’m 5’9 you think It’s a great size for me?
You might wanna go with the z20 Max.. I’ll be doing the zs 190cc or 212cc engine swap within the next month or so.. I just found out that they are a direct fit!
@@015187
If you’re going to spend the money don’t get the zs 190 get the Daytona 212 they have four valves and more power and if you could please reply to my other comments in the comment section thank you so much
@@jamesrothwell8508 sorry about that bro i never got the notification for your comment.. and thanks for the advice but idk if the Daytona is a direct fit
@@015187 No problem Buy things I seen The Daytona should be A direct fit and do you have the link for the carburetor jets I just got the bike for Christmas and I got the same carb from your video and I’m getting the same exhaust thanks man
@@015187 so yeah I did my research in the cases are not exactly The same but it will fit in the frame
Hey just got an Apollo Z20 Max would this be a carburetor to put on it when the factory one wears out?
No take the stock carb off immediately‼️‼️‼️‼️ order the $35 knockoff mikuni carb on Amazon and put it right on so you can really enjoy the bike.. the one in this video was very difficult to get jetted properly.. but the vm22 mikuni carb on Amazon works perfect right out of the box. It’s way better than the garbage stock carb that comes on it. And the genuine vm26-606 Mikuni carb($85-$150) works even better than both once jetted properly
@@015187 got the link for that vm22 i get a bunch of them there dont know which one to order
@@rebeltt_cris yea it’s in the description
@@015187 hey do you have a link to the manifold to put on the carburetor for the real mikuni. I bought it but realized it doesnt just screw in
Does a fmf powercore 4 fit a rfz dbx 18?
Not sure I had to get mine cut down and welded on by a shop
200 main is way!!!! To big and that Intake manifold shouldn’t be holding the carb on an angle it should be as level as possible!
Thanks lol I changed it already and mentioned that in my other review video after this one lol
@@015187 and also do yourself a favor and buy some blue loctite and loctite all the nuts and bolts on the bike! They always seem to come loose and mess stuff up
@@07scoobywrx already have it.. But I will be ordering the engine for the swap next week.. so hopefully the bike will be ready and completely upgraded by February.. going from 17/14 to 19/16 wheels also
@@015187 should check out zongchen 190! 19hp 5 speed
@@07scoobywrx that’s what I’m getting either that or the 212
I got that stock carbs to jet better than that piece of junk mikuni knock off.
How?
@@015187 i took it apart and replaced the float bowl screws. The needle is set no adjustment. 98 main jet 28 pilot. And I had to drill and tap out the aircrew brass cap so I could adjust it. It runs better than the mikuni knock off. I just need the cdi .I'm at 5280 feet.
@@015187 the needle that comes in the mikuni knock off is taperd wrong . The stock knock off carb has a thinner needle. A "real" mikuni is $150.
@@lawrence471 i know I have both Mikuni carbs just have to get the right jets for the genuine one.
@@lawrence471what jets should I try first for a genuine 26 mm mikuni carb on an apallo 125?
That's a two stroke muffler on a 4 stroke bike 😆
😂😂 yea I found that out after a bike shop welded it on and told me it was the right one🤦🏾♂️ I will be changing the exhaust and all when I do the engine swap