Subscribed! This couldn't be better timing.i just got a 12 pathfinder v6. Your videos are great! I am somewhat mechanically inclined and these help quite a bit. I hope you will continue to post what you do as i am following along on my own pathfinder. Great job!!
Thanks for the feedback. Yes I have a few more videos to do on the Pathfinder. I've taken a bit of a break and switched to house repair stuff since I just moved into what can only be described as a fixer-upper that needs some immediate work done on it.
i cleaned mine did not fix issue , keep getting same error code mass airflow , i even put a different mass airflow sensor from my frontier same part number cleared error and it came back 2 days later , this p101 mass airflow sensor error is complete BS
Yeah I'm not too familiar with all of the options for getting the P101 but it seems like it can be a bit of a host of issues and sensor communication problems,
Nice infro but I clean mine on light come back ofter a week even change it on it still come back was told I have to buy it from the Nissan dealer any help please.
I'm not really sure. It might be better to get a Nissan sensor. I'm not sure how much they are but if they are a lot you could try a scrap yard. Is there any other issues along the path of airflow that might be causing an issue.
Great video , I tried it but didn’t solve my issue . my pathfinder only has a rough idle in warm days ( I’m guessing when choke comes off ) have you come across anything to fix my issue ? No hesitation when driving
I'm not sure what that is (is that like a white board cleaner), but the MAF cleaner is a specific type of electronics cleaner that doesn't leave a residue when it dries. You don't want to any sort of film on the sensors. They must have MAF cleaner in the UK, perhaps a different brand.
@@DIYNorth that would suck. I just changed it with an OEM from nissan less that a year ago. Read online that it may take a few driving trips to reset the light. Here's hoping!
Add in the description that this is applicable to Frontiers to generate more views, great video!
Thanks for the recommendation. Will add it into the Tags at the very least.
Just the info I needed. I was preparing to dump $129 on a new sensor. Thanks👍🏾
Thanks for checking out the video. I hope it goes well for you.
@@DIYNorth you also answered my questions about me having a K&N air intake. Thanks again. I’ll be watching more. 👍🏾
Thank you . This is the best review on how to clean the MAF.
Thanks for checking it out and the positive words.
Subscribed!
This couldn't be better timing.i just got a 12 pathfinder v6.
Your videos are great!
I am somewhat mechanically inclined and these help quite a bit.
I hope you will continue to post what you do as i am following along on my own pathfinder.
Great job!!
Thanks for the feedback. Yes I have a few more videos to do on the Pathfinder. I've taken a bit of a break and switched to house repair stuff since I just moved into what can only be described as a fixer-upper that needs some immediate work done on it.
Thanks for the Video! Helped me a lot.. do you have video how to fix the cigarrets connect? I changed the sensor but doesn’t work. Thanks 🙏🫶🏼🙏🇲🇽
Thanks for watching, no I dont have the video that you mentioned.
You are a lifesaver man, thank you
Thanks for watching
i cleaned mine did not fix issue , keep getting same error code mass airflow , i even put a different mass airflow sensor from my frontier same part number cleared error and it came back 2 days later , this p101 mass airflow sensor error is complete BS
Yeah I'm not too familiar with all of the options for getting the P101 but it seems like it can be a bit of a host of issues and sensor communication problems,
After you clean or replace the sensor, do you have to drive it or will the check engine light be off automatically as soon as you start it?
You might need to clear the codes for it to really disappear.
I'm not sure if driving would be enough
Nice infro but I clean mine on light come back ofter a week even change it on it still come back was told I have to buy it from the Nissan dealer any help please.
I'm not really sure. It might be better to get a Nissan sensor. I'm not sure how much they are but if they are a lot you could try a scrap yard. Is there any other issues along the path of airflow that might be causing an issue.
The "Nissan" sensors are just Hitachi. Buy it yourself and change it.
I was having a similar problem and it turned out I had to go to the Nissan dealer for a software reprogramming. 300 bucks. 😕
Hi thanks for sharing,,, what kinda cleaner did u use?
The brand was CRC, the product was "mass airflow sensor cleaner"
Great video , I tried it but didn’t solve my issue . my pathfinder only has a rough idle in warm days ( I’m guessing when choke comes off ) have you come across anything to fix my issue ? No hesitation when driving
Sorry, I have not.
If I see anything I'll try to update.
I've cleaned and also bought a new sensor with air filter and still not working for me. I'm not sure what to do next💁🏽♂️🤦🏽♂️
Is your check engine light on, and if so do you have a code that it is giving?
I had this similar issue back in May and it turned out I had to go to the Nissan dealer for a software reprogramming. 300 bucks.
Could you use panel wipe? I'm in the UK
I'm not sure what that is (is that like a white board cleaner), but the MAF cleaner is a specific type of electronics cleaner that doesn't leave a residue when it dries. You don't want to any sort of film on the sensors. They must have MAF cleaner in the UK, perhaps a different brand.
@@DIYNorth have you also done a videos on how to clean the suction control valve (scv)?
@@andrewbaxter9103 I have no scv videos of any sort.
excellent video
Thanks for checking it out
My check engine light still on. Sometimes the rest happens after I drive it. That common?
It doesn't sound common. Have you plugged in an OBD II code reader to see what check engine code is displayed.
Yes. Before the cleaning. The code was for the MAF sensor. I'll have to head back to AutoZone to see if there's a new code.
Oddly enough it drives better even with the light on. The lag in acceleration was fixed agree the cleaning
Interesting. A few things could cause the MAF code to be thrown. It could be that the sensor is faulty.
@@DIYNorth that would suck. I just changed it with an OEM from nissan less that a year ago. Read online that it may take a few driving trips to reset the light. Here's hoping!
Thank you
no problem, thanks for watching
Thanks. This helped me out.
Thanks for watching. Glad it helped
Helpful 💯🙏
Thanks for checking it out.
Good video thank you
Thanks for the feed back.