Gestures control based Home automation
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2018
- In this video you will learn how to make Gestures controlled home appliances like fan, bulb, tv etc. APDS 9960 sensor is used to control Gestures. In this project three appliances BULB, TV and FAN had been controlled. Right and Left Gestures are used to change the devices. Same way UP gesture is used to ON Device and DOWN gesture is used to OFF Device. The components used in this project can be bought from Amazon. Code for this project and circuit diagram link is given below which can help you to make this project successful.
Components used:-
(1) Arduino Uno board
(2) APDS 9960 Sensor
(3) 16×2 LCD
(4) Relay board
(5) Relay Driver board ( ULN2003 )
(6) Jumper wires
(7) 9V Batteries (2)
(8) Battery Connector
(9) Battery to Arduino Connector
Code link:-
drive.google.com/file/d/1jVpt...
Circuit diagram link:-
drive.google.com/file/d/1G_PE...
Thank you for Watching
Please like and don't forget to subscribe.
Wowww amazing... U r superb sir...
ThnQ bro this video is really very helpful for me
Excellent project....👌👌👌👌
Nice work
Did you train model on your dataset? Which algorithm you used for this?
What type of relay r u using in this project
hey man you killed it ,,,,,
How to make that specific relay board that you're using
Is any dataset is used to train the model??
Owesome mayur
Is there will be a problem if i combine vcc 1 and 2?
error redifinition of void setup is coming what to define over there????
Jordar project
Good video broo..
Awesome
bro the code is not working can you help me
do you also have report on this project
what if i use mpu 6050? is the code the same?
Hello Sir
Actually The Gesture Sensor is currently Not working so what are the alternate option
Did anyone complete the project and did that working properly can I trust and do the project for my college presentation purpose??
please send me the code brother..and one doubt don't we need to train the model using dataset?? If you used any dataset pls send me the link also
i couldn't able to change from bulb to fan and tv through gesture sensor ! why is it soo??
Bro where is the ground pin in relay driver board
Bhai last me sbka connection kaise kiye bulb or fan ka help me bro
Hi your given link is not working,,can I receive the code link ,thanyou
How much cost to.buy these components??
Hey bro could you send me the code,the link is not opening
Bro please provide the program in description..
Hlo sir I'm facing problem with the sensor please help
Can I get the link for the code
Is that uln 2003 stepper motor relay driver board bro?
Yes it is driver for stepper motor
I am trying to do this project for fan only but I am having some issue with the code. If you could help me that will be very helpful
Yes what kind of problem you are facing?
Bro, does pot is required for lcd display to On
No, it is just to adjust brightness of LCD and it is not compulsory to put
Apds 9960 is of different types. Can you tell me the exact sensor. Or share the Amazon link for the sensor that you are using
Sure. Generic APDS-9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino www.amazon.in/dp/B01KT7YN7Y/ref=cm_sw_r_em_apa_i_ZDDNCb52KYMV2
Bro, how could you connect it to the load that is tv, fan, bulb
Through relay we can connect load which can isolate power with control circuit
Please send me the code for this project ..and one thing I want to know that can I do this without that relay driver?? I mean connecting the relays directly to the Arduino??
The code is given in description box. And you must have to connect driver for safety of arduino and to operate relay. Thanks
Bro where should I connect Vcc of arduino to relay driver. Either in 12v or 5v
Both supply must be different and ground must be connected. Means you have to give arduino supply from separate adaptor and for driver you have to use different supply of 5v or 12 v as per relay selection 5v or 12v relay
@@Projectforyou you mean both should not be connected as same volts, am I right bro, either 5 to 12 or 3.3 to 12 and or 3.3 to 5 volts
Yes both supply must be different
Bro explain me that from 11:10 minutes, I couldn't understand
Great work!!
Can you please send me the link for Relay Board
Relay board is easily available at different website like Amazon, flipkart, bangod etc
@@Projectforyou Thank you, Is it necessary to solder Apds9960 sensor?
Absolutely without sensor project will never work
Does it make any difference if I use APDS 9900 instead of using 9960???
I think will not make any difference.
Okay thanks
is there any chance to replace raspberrypi kit instead of arduino
Yes you can use any controller
Your code is not downloading on your drive please send me your code
pls send the code link
I didn't give connection to load, before connecting it, I just give supply to it but my lcd is not switching on, what to do bro??
Might either having problem in LCD or supply of LCD. Check LCD separately is it working or not? If LCD is ok working separately then check your LCD connection
I am getting an error
"SparkFun_APDS9960.h: No such file or directory"
You have to add sparkfun_adps9960 library please add it from Google. Just search apds9960 library. Thanks
I need the code please bro
Please give solution for this warning bro
warning : ISO C++ forbids converting a string constant to ‘char*'
Can i used MPU6050 Instead of APDS 9960?
Yes you can use.
@@Projectforyou for that do I need to modify the code??
Can u please mail me the code i couldn't open which u uploaded in the description below.
Sure. Please attach your email here
@@Projectforyou lpallavi786@gmail.com
@@Projectforyou can u also send the circuit diagram
Fine
Hii.. sir i am harshal Vaishnav i choose this project for my diploma last year project.. i am having issue soo please can you help me
Hello dear from where and which institute are you? And which kind of help you require?
@@Projectforyou sir can we have conversation on call ? I am from Maharashtra..
You can mail me your problem on mayur.prajapati1@gmail.com
Hi can i know what type of the relay board
It's relay driver board which is prepared by me but it is easily available on Amazon and other apps. Just search relay module.
@@Projectforyou the 5v or 12v?and is it 4 channel?
5V Relay Module
only 1 appliance at a time, what i notice is. kindly explain if we can control multiple appliance on or off at a time
You can control multiple appliances but for that you have to do short of change in programme.
@@Projectforyou i am new for all these things can you compile for me , i can understand code but not develop
Bro please can you mail me the code...i couldn't open it which you uploaded on google drive
Sure mail me your id
Bro send me if you get this code
hey i'm working on Gesture Control Smart Power Window. Can you help me??
How can I help you?
Can you tell me from where you got the APDS 9960 sensor?? Can you give me a trustable site to buy APDS 9960?? Because I bought twice but they were clone.
@@karanpatel6590from ali express you can buy it
Project for you hey, can you help me for the coding??
Please send me the code for this project.
It is already their in description box.
Thanks Bro
Can you please add the links for the components used and also the code file as it's not opening 🙂
Sure
The sensor is not working.it is showing something wrong went during init
Add library of sensor.
@@Projectforyou already added but no progress
bro,is it working now?
Bhai code bhej do bro
waht is vcc1 and vcc2
It is two different power supply.
Can you please send me the code
Paste your email here
In arduino Vcc1 and Vcc2 stands for which voltage, bro
VCC1 stands for arduino supply and VCC2 stands for relay supply
Whether it's a mechatronics project
Nope it's electrical project
I couldn't open the code link
Give me your email address i will send it to you
I have a problem in uploading this code in aruino uno...
See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. -This is the thing
I need the code for my project
It is already attached
I am not able to open the code
Sent me your email address i will sent you code
Sent me your email address i will sent you code
@@adarshgaikwad5841 sent you code reply me if you got mail?
Got it. Thanks for helping
Can you send me the code please