Hi,verry nice setup. Can i use in the same time lcd screen and bluetooth app on smartphone? Olso if i have jk bms with heater port and my system is 24v do i need use 24v heater,any 24v heater or just those silicone plate heaters? For what is rs485 can port,i have that litlle black rs485 can module,how can i use it,maybe to communicate with my hybrid inverter,or how? Hope to answer my questions. I'm now in this lifepo4 setup.Thanks in advance.
Hi. I have the same 4.3" display monitor. I don't need to have the monitor on all the time and need to know which wire to isolate with a switch to turn off the monitor only. I think the "RED + plus" and "YELLOW - neg" is the power supply to the monitor only, therefore, placing a switch on one of these wires should work. Is that correct ?
@@parkhopper3627 I've just installed a simple latching on/off switch on the 'Red' 12v power lead, and 'Yes' it turns off the monitor without affecting the operation of the BMS
You can turn off the lcd via the app. Goto control, enter password then toggle display always on.
I can't work out the best way to mount it to a panel
Hi,verry nice setup. Can i use in the same time lcd screen and bluetooth app on smartphone? Olso if i have jk bms with heater port and my system is 24v do i need use 24v heater,any 24v heater or just those silicone plate heaters? For what is rs485 can port,i have that litlle black rs485 can module,how can i use it,maybe to communicate with my hybrid inverter,or how? Hope to answer my questions. I'm now in this lifepo4 setup.Thanks in advance.
Yes with smart phone. You should use 24V heater or use two 12V heaters connected in series. I have not explore the RS485 CAN module yet.
Hi. I have the same 4.3" display monitor.
I don't need to have the monitor on all the time and need to know which wire to isolate with a switch to turn off the monitor only.
I think the "RED + plus" and "YELLOW - neg" is the power supply to the monitor only, therefore, placing a switch on one of these wires should work.
Is that correct ?
I believe so. Did you try?
@@parkhopper3627 I've just installed a simple latching on/off switch on the 'Red' 12v power lead, and 'Yes' it turns off the monitor without affecting the operation of the BMS
@@Rocky-52 Thank you for confirming.
Did you take any photos of the install inside the battery boxes
Yes in this group "facebook.com/groups/1314409799369442", please join.
Thank you I will. You have have done a great job with your mods . Have a great holiday
is this touch display always on or only in discharge time?
Yes touch screen but just for the three tabs. The screen is always on but you can add a switch to the +12V wire for screen on/off control.