How to Install Invidia Test Pipes 09-19 Nissan 370Z
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/92/a/...
In the video 1A Auto shows you how to install test pipes, which is a procedure that removes the catalytic converters. This video applies to the 12 Nissan 370Z
This installation is for off road use only!
🔧 List of tools used:
• 10mm Wrench 1aau.to/ojR/1AX...
• 14mm Wrench 1aau.to/ojR/1AX...
• 10mm Socket 1aau.to/oHG/1AX...
• 14mm Socket 1aau.to/oMP/1AX...
• 15mm Socket 1aau.to/oMP/1AX...
• 8mm Socket 1aau.to/oHG/1AX...
• 1/2 Inch Air Impact Gun 1aau.to/oz/1AXA...
• Ratchet 1aau.to/oXX/1AX...
• Socket Extensions 1aau.to/oMP/1AX...
• Swivel
• Anti-Seize Grease
• Floor Jack 1aau.to/onY/1AX...
• Grinder
• Jack Stands 1aau.to/on9/1AX...
• Wire Brush 1aau.to/ocY/1AX...
For More Info visit us at 1aau.to/h/bzS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Raw fuel smell, is it bad? Do you smell like you just walked out of a bar after driving it post test pipes?
I spent 2 days getting the demon bolts out 💀 shows how much of a difference good tools make
Wow! You're amazing at explaining things at the right pace and including "why" you did things in the sequence you did.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +07wrxtr1
❤🎉 wow! Best instructional video on tackling the demon bolts I've seen! Clean picture, step by step no redundant filler footage of petting a cat or w/e.
That sound is like music to my ears. Great video. Thank you...
Thanks for checking us out! +Alejandro Roal
Great job, showed all thew usual problems which can occur. I might have use penetrant on all those bolts, whatever works.
To change the test pipes do you have to tune the car? Or can I put the test pipes and tune it later?
Great video. Thanks! What would you do if it bolts were stripped though?
Nice bro, would you recommend this setup, is it raspy. Also what about performance.
Does putting the aftermarket cats make the check engine light show up? How was the performance compared to stock cats is there a difference
Very great video 💯
The two bolts u left on are they the demon bolts? So u just took out the socket?
No those are not the deamon bolts haha, I replaced those.
I took out the nuts because they were actually studs, and I didn't want to chance breaking those studs. Since the threads were still ok I just left then and used new nuts
I saw some guy with the heat wrap on their test pipe but your isn’t . Do we need to wrap it with heat wrap or ceramic coating , thanks u
No not necessary
what type brand of pipes are these
I have a Z myself and bought test pipes planning to do it myself but im sure it would make the job be alot harder than you think if you tried do it in your driveway lol, what was the cost for you guys to get it done??
Yes haha might be a bit harder on jack stands but my advice is to invest in some 6 ton jack stands from harbor freight. Maybe you don't need 6 tons on them, but they are twice the height of a 3 ton stand meaning you get way more room to work under the car, especially if you have a jack that goes up 18 inches or more.
Also cost wise, assuming you have all the tools you need, it'll cost you whatever the test pipes are! And trust me, it's worth it :)
have you installed the test pipes? and if you did. do you like the sound? how about performance? any check engine light without a tune?
@@sparco023 yes check engine light came on
Newer Z models are most sensitive to the cats being removed even having extended 02 bungs even with a j bend soldered onto the test pipes
Tune required to get rid of CEL
@@BoyzNAcne damn bro it sucks. I planning on tuning. Im going with isrs. double tail. dont care much about the tomei. cant stand the one pipe look
Excellent video, very professional the way you explained the whole process to do that job👍👍👍👍👍
Do you have to go under to take the other bolts out before going for the demon bolts? Or can I go straight for the demon bolts?
You can go straight for the demon bolts. I usually do those first since their harder just to get them out of the way
I live in Michigan we got no emissions 😅
Can u plz give me a link or name for what specific exhaust u used
Mahdi B. Invidia Gemini
Would these fit on my 2020 nismo? I just installed an invidia cbe, gotta do a cat delete now
+Devin Batista Thanks for checking us out! These pipes will only fit up to the year 2019.
could i get a link where you bought the invidia test pipes
+Stephen R Thanks for watching! We do not carry this test pipe kit at this time, so we do not have a link to provide.
wait, when invidia test pipes installed, U see the CHECK ENGINE LIGHT? please let me know.
cyriljay ramirez No you don’t see it because the O2 Sensors place are extended
Would these fit a 2008 350Z VQ35HR?
no
Will those same pipes fit in a g37xs sedan?
yes
TAKE OFF THE 02 SENSOR BEFORE THE BOLTS
Why won’t my extensions stick together!????
What if we adju...BANG BANG BANG BANG. Thats better
FIRST