You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Great build! More impressive is your straight forward video approach. Good explanation of materials used, measurements, slow/methodical process. No stupid comments or silliness.
Hello. I am a new subscriber. Still amazed at what information there is on youtube. Having retired now, i am setting up my workshop and recentlt purchased th dewalt 7485. My qestion is how do i purchase the plans for this mobile saw bench??
Nicely done, some good ideas in there. I have a dust collection drawer under my DeWalt 745, it is easy to empty. It works quite well, but I am going to replace it with a large funnel (almost as big as the saw itself) with a 100mm outlet, and connect that to the dust extractor.
Great video! How did you attach the plywood to the saw (one for the side extension table)? You should the build up to a point but then in the next frame there was a block in between with bolts attached. Does that mean the bolts or screws are drilled through the saw?
In reality Dewalt is not concerned with supplying a TOP bench saw: -The internal dust insulation has been changed, even so the machine releases a lot of dust. - It's a noisy machine. - The consumer does not have the option to buy this machine at 127 volts. - No disc brake - Goniometer with clearance. - There is no flange size option, plastering the consumer to buy cutting discs of another size (should come shaft hole flanges of other disc sizes as an accessory). - The cutting edge is out of adjustment. - The angle adjustment knob is too hard as well as unreliable. - Does not fit 254 mm disc, only 250 mm. When starting and stopping the engine, strangely "spark". DISAPPOINTMENT! The industries, such as Bosch, Makita, Dewalt etc. it is the same disrespect towards the consumer. Adilson you're right! Enough of watching videos from TH-camrs running their hands over the heads of the saw manufacturers just to beg and beg a shut up and in favor of GARBAGE!!!!!!! People who keep selling themselves to the manufacturers of saws and tools in exchange for "jabá". The reality is one, for tool manufacturers, we are considered third class consumers, not to mention the lack of safety and quality! We cannot and must not accept these equipment and tools without quality, safety and respect for others, it is the lack of maturity prevailing at the expense of reasonableness, common sense, ethics, safety and respect! We cannot accept that we Brazilians are treated as third-class consumers, denying us and making us have to consume products without quality. We don't have to accept what the manufacturers want to sell us and push down our throats, precarious, limited machines, which fall short of our needs. Today, the market has a lack and need for portable saws with better quality, as well as features and safety. This "little chat" and the justification of the industries that these machines are for construction sites only serves to relieve them of launching better saws. Year after year the so-called "releases" and or "new" do not have effective advances and improvements. It is the same as always, the accommodation of industries. What really changes is just price, always more expensive, without significant effective improvements for the consumer!
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Great build! More impressive is your straight forward video approach. Good explanation of materials used, measurements, slow/methodical process. No stupid comments or silliness.
thank you very much 👍👍
Dari kemarin nonton video nya sih, cuma jarang komen, kali ini gak lupa buat komen mas.
.
.
.
Hadir mas!!!
maksih banyak mas, gk pernah absen hehehe
Very nice! There will be a lot of dust in the lower compartment. Maybe you can make a drawer for it to collect the dust.
thank you for suggestion, i will upgrade add drawer under table saw for dust container
Akhirnya tayang juga video dari master ♥️♥️... nice build mas
Iya mas kelihatanya gampang tp buatya ssh teryata klo ogn presisi
Great idea and job👏🏼👏🏼👏🏼
Thank you! Cheers!
Hello. I am a new subscriber. Still amazed at what information there is on youtube. Having retired now, i am setting up my workshop and recentlt purchased th dewalt 7485. My qestion is how do i purchase the plans for this mobile saw bench??
Nicely done, some good ideas in there. I have a dust collection drawer under my DeWalt 745, it is easy to empty. It works quite well, but I am going to replace it with a large funnel (almost as big as the saw itself) with a 100mm outlet, and connect that to the dust extractor.
That's a great idea!
Nice job....bravo 👏👏👍❤ Friendship to France
Thank you very much
It's amazing the table saw already uses dewalt👍
Thank you very much
Very nice. I'll build one for my dewalt DWE7492. Please make part 2 for dust collection and storage drawers or cabinet.
Thank you very much now i still process make part 2, hope can premier next week
Excellent work, dude! Really well done! 😃
I need to do the same with mine!
Stay safe there with your family! 🖖😊
Thanks! 👍
woww excellent and well done mas
Suwun mas😁
I adore your business
thank you very much 👍👍
nicely done.. you have design drawing or not, sketchup?
thank you very much, i really sorry for late reply!! 🙏
Nice build!
Glad you think so!
Great video! How did you attach the plywood to the saw (one for the side extension table)? You should the build up to a point but then in the next frame there was a block in between with bolts attached. Does that mean the bolts or screws are drilled through the saw?
Thank you very much 👍👍
It's amazing. Very nice! What kind of material (plastic) you used (white thin panel)?
Thank you very much, material call pvc sheet. Smooth and reduce vibration
Itu penggaris item yg d pake namanya apa ya? Saya cr2 di marketplace blm ketemu namanya
Pernah sy review, linkya ada di deskripsi
th-cam.com/video/nNrHeISg3SU/w-d-xo.html
@@plywoodworking oalah beli d banggood, yawis makasih infonya om
Mas animasi plan nya pake aplikasi apa?
Terimakasih
3D max autodesk
Mau dijual lagi sepertinya ini.. Joss om
Udh mas gk dijual lgi, cpk buatya kerja gk ada ts agk ssh soalya gk bs cpt
The black measuring tool near the being of video, what are they called?
i review on this video, i dont know about the name, i give link on description
th-cam.com/video/nNrHeISg3SU/w-d-xo.html
Thanks, handy tool!
Table saw diy nya udah dijual?
yup bnr mas dibeli am tmn pas main ke Ws, terpaksa cari TS lgi 😁😅
Hi, Which type of Freud is the blade?
Freud pro LA20M 003 48T
@@plywoodworking thanks a lot and compliments for your work!
I use the Freud deablo in 10" & 12" blade. Amazing blades!
You right that amazing blade, i love that blade.
1 factory with diablo but diablo have many type blade than freud
ESPETACULAR
thank you very much!!! 😊👍👍
1!!! Беларусь 👍💪
thank you very much!!!
Terbaik👍👍👍
masih kalah am TS sliding fenomenal 3HP hehehe
@@plywoodworking hahaha belum jadi ko om 🤭🤭
good sae
Many many thanks
⭐🙂👍
👌👌👌🤝🤝🤝
Thank you very much 👍👌
In reality Dewalt is not concerned with supplying a TOP bench saw: -The internal dust insulation has been changed, even so the machine releases a lot of dust. - It's a noisy machine. - The consumer does not have the option to buy this machine at 127 volts. - No disc brake - Goniometer with clearance. - There is no flange size option, plastering the consumer to buy cutting discs of another size (should come shaft hole flanges of other disc sizes as an accessory). - The cutting edge is out of adjustment. - The angle adjustment knob is too hard as well as unreliable. - Does not fit 254 mm disc, only 250 mm. When starting and stopping the engine, strangely "spark". DISAPPOINTMENT! The industries, such as Bosch, Makita, Dewalt etc. it is the same disrespect towards the consumer. Adilson you're right! Enough of watching videos from TH-camrs running their hands over the heads of the saw manufacturers just to beg and beg a shut up and in favor of GARBAGE!!!!!!! People who keep selling themselves to the manufacturers of saws and tools in exchange for "jabá". The reality is one, for tool manufacturers, we are considered third class consumers, not to mention the lack of safety and quality! We cannot and must not accept these equipment and tools without quality, safety and respect for others, it is the lack of maturity prevailing at the expense of reasonableness, common sense, ethics, safety and respect! We cannot accept that we Brazilians are treated as third-class consumers, denying us and making us have to consume products without quality. We don't have to accept what the manufacturers want to sell us and push down our throats, precarious, limited machines, which fall short of our needs. Today, the market has a lack and need for portable saws with better quality, as well as features and safety. This "little chat" and the justification of the industries that these machines are for construction sites only serves to relieve them of launching better saws. Year after year the so-called "releases" and or "new" do not have effective advances and improvements. It is the same as always, the accommodation of industries. What really changes is just price, always more expensive, without significant effective improvements for the consumer!
Thank you so much 😀
I think this video was about the bench build, not the product.
Someone needs a vacation