My dad taught me how to soldier when I was about 8 years old. I’m in my 50s now. Yep, you know what you’re doing. This is a great skill to have and you never know when you’re going to need it, for things that you never thought you would need it for!. Great job as always teaching things that are valuable other than rc stuff
I knowwww. the motors are my least favorite to solder. I'm always eyeing people's solder jobs on their cars and envy the people who can get them all perfect. haha!
Great vid Hayley, as always! So many folks are intimidated by soldering, this video will help a lot for sure. And yes, a point I always like to make.... spend the money and get a good soldering station. It's a game changer. It is really hard to get good results when you don't have enough heat. 😉
I’ll second that. Always get the highest power iron you can. Work quicker, less heat transfer then. And get a good soldering “helping hands” station. I always struggle with battery plugs! HATE doing them, especially on a live battery!!
Probably one of the best soldering guides I’ve seen. Thank you RC girl 😊 it looks so easy when you do it. I always struggle since I beleive you always need another hand. But my heart breaks when you remove the deans plug with an xt60 😂😂 just kidding.
Awesome video 👍 Pro tip: after you have remove isolation of a wire. Twist the wire in the same direction as the wire is already twisted. Then flux and tin it 🙂 The twist make the wire easier to solder to e.g. a connector.
Great vid! I would recommend using a much larger tip with a flat spot on the soldering iron for larger diameter wire and joints, it will transfer heat more quickly. You'll find the small tips will loose heat too quick and stick to the joints. Also best to place the iron underneath the wire for a few seconds and touch the solder on the top side of the wire. Also try not to apply too much solder to the wire or take too long to make the joint as the solder will wick up into the wire under the sleeving making the wire stiff, especially if you need the wire flexible at the connection.
Well I always clean the tip of my iron when I get done with a soldier connection (that's how I was taught years ago) and for me it's one of the most important steps when I soldier, I've used resin soldier with resin soldier flux but some acid flux with some silver soldier works better for electric connections
Excellent tutorial video, Haley! Although, I've been using solder with flux already in it, I had no idea how much it helps to have additional solder as well! I think I'll be much better at soldering now, thanks to you! Awesome video, as always!
Awesome video and well done! Never thought of heat resistant gloves. I'll admit it, I grabbed a 12awg wire one time after just soldering it. Yep. Never did that again lol. btw pretty new to your channel 🙂 keep up the great work.
was looking at printers last night!!! knight customs has many goodies for the fordyce i just picked up!! and id throw the anchor on my tf2 custom truggy
You mentioned it several times but can’t be emphasized enough. Use plenty of flux. It will make soldering so much easier. Rosin core solder just isn’t enough. I’m sure somebody will chime in with when you need it and when you don’t, but I always clean the flux from my solder joints when done using isopropyl alcohol.
yeah eye protection is critical...I remember many years ago I splattered some solder into my eye when working on my RC10L back in the early eighties...and ended up in the emergency room..
I've wasted multiple soldering iron to Oxidization which means the iron tip turns black permanently. Since then I use a damp cloth to wipe the tip now and then and always cover the tip with lead. Never leave the tip exposed or they will get oxidized.
Yeah good reminders! I didn't go into detail about iron care/maintenance in this video, but I definitely clean the tip every time before putting it in the holder. And tin before storing it.
Best Solder is 62% Sn 36% Pb 2% Ag solder as it has a slightly higher electrical conductivity, cooler soldering ~200°C and cleaner result (shinier / harder skin). Best thing about solder is you only need to buy the best quality ONCE. 500g roll will last you your life time. Kester is brilliant and yes I did buy a roll from Asia and I used 1cm to discover it was pure turd. It's now a paper weight.
Watch how many times the MOLTEN solder splatters in the video. Wearing safety glasses while soldering is probably one safety item I would never compromise on.
Always makes me laugh. We call it soul - der because it has an "L" in it. It isn't spelt "soder". I have always wondered why you guys pronounce it that way?
Been watching your videos for ages. Unfortunately your channel has changed from a hobby orientated one to a commercial one. No criticism there, it is your channel and you handle it how you want. But it just might chase some long time viewers away.
quite the opposite! I'm so grateful to companies that help support my channel so I can continue to make videos that help people learn and grow in the rc hobby.
Every Temu shopper will get $100 coupon bundle to save more: temu.to/m/ujrd2woqotg
Or download the Temu app and search code【dpv8699】to claim!
Been in the auto industry 40 yrs. One of the best instructional videos on TH-cam.
My dad taught me how to soldier when I was about 8 years old. I’m in my 50s now. Yep, you know what you’re doing. This is a great skill to have and you never know when you’re going to need it, for things that you never thought you would need it for!. Great job as always teaching things that are valuable other than rc stuff
Great video I’m a mechanic and I’ve been doing this for 30 years your tutorial is amazing great job🤘✌️
Good video. I always struggle with soldering to the motor without making a mess. Lots of flux is definitely the key!
I knowwww. the motors are my least favorite to solder. I'm always eyeing people's solder jobs on their cars and envy the people who can get them all perfect. haha!
I personally see nothing wrong with anything suggested in this video. Thank you for helping ALL people in the hobby.
Great video Hayley, thank you. Now I need to practice.
Loved this how to, your science background really shows! And congrats on your sponsorship!🎉
Aw thanks! I actually learned a ton doing research for this vid which helped my own soldering haha
Great video! Don’t forget to solder in a well ventilated area as those fumes are toxic😃
Thank you. I been needing a good video on this to give me the confidence
Let me know how it goes!
Great tutorial! Now let’s see if I can improve my soldering skills. Thank you.
This is SO HELPFUL! Thank you so much for clear and approachable instructions!
I'm needing to do this on some current projects💯🚘 thanks 4 the vid 🏄♂️
Great vid Hayley, as always! So many folks are intimidated by soldering, this video will help a lot for sure. And yes, a point I always like to make.... spend the money and get a good soldering station. It's a game changer. It is really hard to get good results when you don't have enough heat. 😉
I’ll second that. Always get the highest power iron you can. Work quicker, less heat transfer then. And get a good soldering “helping hands” station. I always struggle with battery plugs! HATE doing them, especially on a live battery!!
Awesome rc girl I learned something today think you enjoy it too 👍😎♥️
Great tutorial. Thank you for the video!
You just reminded me that I really suck at soldering. 😂
Amazing video! Thank you!
Probably one of the best soldering guides I’ve seen. Thank you RC girl 😊 it looks so easy when you do it. I always struggle since I beleive you always need another hand.
But my heart breaks when you remove the deans plug with an xt60 😂😂 just kidding.
Thanks! You definitely didn't see all the XT60s I melted or ruined trying to get a perfect one on camera!!! lol Yes another hand always helps too.
Awesome video 👍 Pro tip: after you have remove isolation of a wire. Twist the wire in the same direction as the wire is already twisted. Then flux and tin it 🙂
The twist make the wire easier to solder to e.g. a connector.
Thanks - good point! I did twist it but didn't mention it in the vid whoops
Great vid!
I would recommend using a much larger tip with a flat spot on the soldering iron for larger diameter wire and joints, it will transfer heat more quickly. You'll find the small tips will loose heat too quick and stick to the joints. Also best to place the iron underneath the wire for a few seconds and touch the solder on the top side of the wire.
Also try not to apply too much solder to the wire or take too long to make the joint as the solder will wick up into the wire under the sleeving making the wire stiff, especially if you need the wire flexible at the connection.
Well I always clean the tip of my iron when I get done with a soldier connection (that's how I was taught years ago) and for me it's one of the most important steps when I soldier, I've used resin soldier with resin soldier flux but some acid flux with some silver soldier works better for electric connections
Excellent tutorial video, Haley! Although, I've been using solder with flux already in it, I had no idea how much it helps to have additional solder as well! I think I'll be much better at soldering now, thanks to you! Awesome video, as always!
Yeah the flux paste is really helpful for getting it in nooks and crannies. :)
Great information nice job 😊😊😊
Good breakdown and tutorial. Thanks!
Awesome video and well done! Never thought of heat resistant gloves. I'll admit it, I grabbed a 12awg wire one time after just soldering it. Yep. Never did that again lol. btw pretty new to your channel 🙂 keep up the great work.
Yeah i've definitely burned myself doing that!! Thanks for the sub
Fantastic video. Question. Where can I find that Red Wire holder. It looks heaven sent.
was looking at printers last night!!! knight customs has many goodies for the fordyce i just picked up!! and id throw the anchor on my tf2 custom truggy
You mentioned it several times but can’t be emphasized enough. Use plenty of flux. It will make soldering so much easier. Rosin core solder just isn’t enough.
I’m sure somebody will chime in with when you need it and when you don’t, but I always clean the flux from my solder joints when done using isopropyl alcohol.
@@marks7445 yep I forgot to mention the cleaning with IPA 🤙🏼
yeah eye protection is critical...I remember many years ago I splattered some solder into my eye when working on my RC10L back in the early eighties...and ended up in the emergency room..
@@paulmfti 😳
Your an XT60 fan,I'm an EC3 or IC3 fan.Thats what I have in my Horizon Hobby Planes.
I've wasted multiple soldering iron to Oxidization which means the iron tip turns black permanently. Since then I use a damp cloth to wipe the tip now and then and always cover the tip with lead. Never leave the tip exposed or they will get oxidized.
Yeah good reminders! I didn't go into detail about iron care/maintenance in this video, but I definitely clean the tip every time before putting it in the holder. And tin before storing it.
Do you have any thing on Rumble or any other sight then you tube
Yeah I do the same thing except I just keep pouring more and more solder into the joint until it looks like an egg.
GREAT JOB. MAY I ASK WHERE YOU GOT THE RED WIRE HOLDER. I WANT TO GET A COUPLE. THANK YOU. 👍
on temu temu.to/m/u2mft6fa1uw
@@RCGirl GREAT! THANK YOU.
🤩👑🏆🔥👏👏👏👏👏👏👍
Best Solder is 62% Sn 36% Pb 2% Ag solder as it has a slightly
higher electrical conductivity, cooler soldering ~200°C and cleaner result (shinier / harder skin). Best thing about solder is you only need to buy the best quality ONCE. 500g roll will last you your life time. Kester is brilliant and yes I did buy a roll from Asia and I used 1cm to discover it was pure turd. It's now a paper weight.
please tell the truth are the Xt60 Bullet Connectors any good are they as good as the Genuine AMASS
👍🔥👏🏆👑🤩👉🔥👏👏👍
💕💕💕
Never ever in my life have I see someone soldering with safety glasses and a glove. Ever.
rebels!😄
Watch how many times the MOLTEN solder splatters in the video. Wearing safety glasses while soldering is probably one safety item I would never compromise on.
Great instructional video, but damn! Far too much "soddering" for me 🤯
My dream hobby wife.I fly electric R/C airplanes.
Always makes me laugh. We call it soul - der because it has an "L" in it. It isn't spelt "soder". I have always wondered why you guys pronounce it that way?
I have no idea why we pronounce it this way. It makes no sense to me either.
Been watching your videos for ages. Unfortunately your channel has changed from a hobby orientated one to a commercial one. No criticism there, it is your channel and you handle it how you want. But it just might chase some long time viewers away.
getting sponsored by temu....ouch
quite the opposite! I'm so grateful to companies that help support my channel so I can continue to make videos that help people learn and grow in the rc hobby.
Why would that be ouch if you're getting sponsored by dim I don't see how that would hurt you
Great video, thanks. 😊
@@Gibsonlife573 do some research on temu... be warned.
@@RCGirlyou also know what happens when people install the app right ??
Your solders on the XT60 and motor don't look good, don't flow out enough
If you use a larger tip (3 - 5 mm) you get better heat transfer.