Well, I got those two items you showed to work. I lined them up and used a weighted mallet and gave it a good couple of whacks. It started going together, and I was able to push them together. I also added that Walker walkie talkie attachment from Amazon, so now I have comms with my Walkers 😊
Wow thank you so much. I have spent alot of money trying to find a way to mount my walkers to my hhv helmet. Just ordered the parts a minute ago. Appreciate what you have done here bud. Thanks!!
One thing I ran into is that sometimes the balls on the ends of the wires will make the plastic pieces that attach to the ear cups too large after you pull the wires out. If this happens, a short session with a heat gun will relax the plastic so that the ear cups won't fall off the wires.
I have both parts you show here, the adaptor you bolt to the HHV M-Lok rail, and the part from Amazon that goes to the headlhones. I guess I am not strong enough to slide those plastic parts together, I have even filed down the one a little bit that mounts to the helmet, then used a hammer to whack rhe peiecs to mate, no luck. I think I am going to go back to the HHV ear-pro one, at least I got it to work.
Awesome video and very informative! Just a quick note, the MLOK adapters are actually supposed to go in the lower center opening of the rail. To do this you'll need to gain access to the back of the rails by unscrewing the three Philip head screws. Once you've done that, you'll be able to slide the T nut through the back of the rail and insert it through that middle opening. After that you can screw the rail back on and proceed with installing the rest of the items. The adapters and mounts are susceptible to sliding/slipping off the top larger opening so to avoid that we advise to install the adapters in the lower opening.
The ear mounts came with different plastic pieces that you just slid off right? The link in your description brings me to a set with peltor attachments
I've bought 4 different types trying to mount my walker razors to my hhv, and they all have the flat tab in the wrong direction so they will fit but not stay on
This worked, thanks!! Wish I never bought the HHV helmet. Basket sucks so I bought a team wendy cam fit. Team wendy was still cheaper than HHV micro lattice crap. HHV has been the biggest pain in the ass due to the m-lok rails so everything needs an adapter and stick out to far. The shroud is junk also, had to replace because my Wilcox G24 was so loose it rattled. Basically had to replace everything except the shell and even that crap is made in China and probably won't stop a 22lr. If you're thinking about a HHV helmet just don't do it.
@UChgryHeUHUF2B_Q_3D0giBg yea. There’s also American made helmets from American companies that don’t mislead their customers. This company uses a catchy name and appeals to veterans that don’t know any better and just assume this is a American based company with American products, which is not accurate.
@@Albrtd3 there are US customs records that show they import their helmet shells from China. Their plan is to “eventually” make all helmets and components stateside, but that has yet to take place.
This is the best video showing how to do this, no bs, straight to the point AND you give the links to the products you used. Thanks a lot man!
No problem buddy! Glad you like it!
100% my adhd kicked in w the other vids.
Quick note, this does have the ability to swing around if you want the ear pro to swing more towards the front and back.
Well, I got those two items you showed to work.
I lined them up and used a weighted mallet and gave it a good couple of whacks.
It started going together, and I was able to push them together.
I also added that Walker walkie talkie attachment from Amazon, so now I have comms with my Walkers 😊
Fantastic video. Thanks. I ve struggled with attaching ear pro to my hhv
Glad to help man
Yeah it was a real pain to figure out hope this made things easier
I've always wondered how these people get an E-muff attachment on the helmet. Thanks
No problem buddy
So, the issue I’m having is the arms aren’t staying in the Walker brackets
I just got mine attached to my hhv the adaptor I got from hhv is very hard to manipulate I want one like yours I'll have to get that
Are these walker razor slims ?
Wow thank you so much. I have spent alot of money trying to find a way to mount my walkers to my hhv helmet. Just ordered the parts a minute ago. Appreciate what you have done here bud. Thanks!!
One thing I ran into is that sometimes the balls on the ends of the wires will make the plastic pieces that attach to the ear cups too large after you pull the wires out. If this happens, a short session with a heat gun will relax the plastic so that the ear cups won't fall off the wires.
I ran into this. Where on the plastic are you applying heat?
@@bigheadbok I inserted the wires all the way and then applied heat to the top part of the plastic.
Will hard head veterans pop out 3m arc kit not work with the walkers ?
It can swivel front and back?
Thanks a lot! The CGS adapter was the part i was looking for!
I have both parts you show here, the adaptor you bolt to the HHV M-Lok rail, and the part from Amazon that goes to the headlhones.
I guess I am not strong enough to slide those plastic parts together, I have even filed down the one a little bit that mounts to the helmet, then used a hammer to whack rhe peiecs to mate, no luck.
I think I am going to go back to the HHV ear-pro one, at least I got it to work.
HHVs attachment is lower profile.
Could you do this with only the walker slims? Just basic ear muffs or do they have to be the electric ones?
bet thx man . i was scared to break em but you said just pull it out so i did . and i came right out like you said
Will this work on a pts m tek flux? It’s also m lok
i like slappin folks...
Helpful video. Thank you.
HHV! 🤙🏼🇺🇸
Are these walker slims or patriot series?
Thank you!
Outstanding. Thanks man.
Awesome video and very informative! Just a quick note, the MLOK adapters are actually supposed to go in the lower center opening of the rail. To do this you'll need to gain access to the back of the rails by unscrewing the three Philip head screws. Once you've done that, you'll be able to slide the T nut through the back of the rail and insert it through that middle opening. After that you can screw the rail back on and proceed with installing the rest of the items. The adapters and mounts are susceptible to sliding/slipping off the top larger opening so to avoid that we advise to install the adapters in the lower opening.
You guys should do a video showing that. As instructions were extremely difficult to find, that'd be really helpful.
But thank you for the information
@@Albrtd3 Video is up on our channel!
@@Albrtd3 The video is up on our channel!
@@Albrtd3 th-cam.com/video/3CifmpYJEmg/w-d-xo.html
Has anyone ever tried to fit those on a Mitch 2000 ?
hey boss, how do i go about finding the NSN for these helmets ? thanks in advance!!
these don’t have an NSN. You’ll only find an NSN on issued equipment which if you need an NSN for a high cut helmet Ops-Core has those.
Has anyone ever told you that you sound like Channing Tatum?
No hahaha thanks
Thanks, This was helpful
im using the kit from HHV to mount mine, i figure they sell both it should work
The pop out ones? Did it work
@@justjsse8917 yes indeed works well
Does this work with any walker headset or just that specific one
Every one I've encountered that has the arms like that
The ear mounts came with different plastic pieces that you just slid off right? The link in your description brings me to a set with peltor attachments
I've bought 4 different types trying to mount my walker razors to my hhv, and they all have the flat tab in the wrong direction so they will fit but not stay on
@@gaiusjuliuscaesar1010 Yeah boss, you slip those plastic pieces off, sorry I did not mention it in the video.
@@gaiusjuliuscaesar1010 That way it's just metal like it shows in the video.
Will it work with the HHV rail adapters?
It worked for me, the Walker’s fall off the HHV’s a little easier so keep that in mind. But as long as you don’t pull straight down on them they work
This worked, thanks!!
Wish I never bought the HHV helmet. Basket sucks so I bought a team wendy cam fit. Team wendy was still cheaper than HHV micro lattice crap. HHV has been the biggest pain in the ass due to the m-lok rails so everything needs an adapter and stick out to far. The shroud is junk also, had to replace because my Wilcox G24 was so loose it rattled. Basically had to replace everything except the shell and even that crap is made in China and probably won't stop a 22lr. If you're thinking about a HHV helmet just don't do it.
Ah yes. The Chinese helmet made for US veterans who can’t read and don’t want ballistic protection.
With the shit tier ear pro too
Source plz?
@UChgryHeUHUF2B_Q_3D0giBg yea. There’s also American made helmets from American companies that don’t mislead their customers. This company uses a catchy name and appeals to veterans that don’t know any better and just assume this is a American based company with American products, which is not accurate.
@@Albrtd3 there are US customs records that show they import their helmet shells from China. Their plan is to “eventually” make all helmets and components stateside, but that has yet to take place.
Sorry for the late reply. Which American companies would you recommend, besides expensive like opscore
You won't be able to communicate with these ear protections...
yes you can, they can be hooked up to baofangs and you also can buy the walkie attachment for this headset
Step one: don't buy an HHV helmet.
You didn’t have a lot of money and bought garbage that wouldn’t stop a fart on a calm day. Should’ve bought a bicycle helmet, for more protection
Gas masks are for farts :) not helmets