Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey man have you ever tried the SC "Slim" Moving Black Diamond Deep Tooth Clipper Blade on this Ergo along with the SC Faper Blade? I heard they take this clipper to another level.. Thanks for the vid btw very helpful 👍🏼 👌🏼
Hey whats up bro, i just got my ergos a week ago, tryed to zero gap them for for some reason one side stays loose, any recommendations? Thank you brother GOD BLESS YOU🙏🏻
I believe the wahl ones fit on it as well but to make it a floating lever all you would need to do is take off the lever and remove the metal piece it comes with that created the click and put it back on creating a floating lever. 👍🏼
This maccine is a pain in the ass to zero gap, or dissassamble. U should win a certificate to assembly this fucking machine without damaging the screws.
I just purchased 1 on Friday and having the same issue. I even changed rail metal piece that the company sent to 1 of my coworkers to fix his problem and still one side lower than the other and when I move the lever to the 3, 4, 5 click the blades is all crooked
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
I did but the head is still moving a little
Great and easy tutorial 🤞⚜️
These can't zero and one side is always higher than the other
I always look forward to your uploads
I really appreciate that! Always trying to give you guys the best content I possibly can so thank you so much 💪🏼
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey man have you ever tried the SC "Slim" Moving Black Diamond Deep Tooth Clipper Blade on this Ergo along with the SC Faper Blade? I heard they take this clipper to another level..
Thanks for the vid btw very helpful 👍🏼 👌🏼
Do u still have lids transparent for stylecraft ergo??
How do I make it to wear I wanna use the black lever but clicky
When I took my lever out a spring came out do anyone know where that go 😂
@MMA BARBER LIFE needed this video his clippers had the gap on the side of the case
I figured it out the other day. Thx btw
where can u guys the lids just by itself
This video helped me so much! Thank you
Awesome! Thank you! 🤙🏽
@@iamcesarq no, thank u🤗
Can these bald when zero gapped?
Hi Caesar I would like to ask if you sell the blue body kit with the click lever for the ergo as a single piece?
What is the blade range for the stylecraft ergo (factory setting, no zero gap)? I cannot find this anywhere, seems like an obvious spec. .5mm to 1?
Let goo your videos are 🔥
Appreciate that 💯 bro
Hey whats up bro, i just got my ergos a week ago, tryed to zero gap them for for some reason one side stays loose, any recommendations?
Thank you brother GOD BLESS YOU🙏🏻
Hey I was wondering what u did in this situation bc I’m having the same problem and I think I broke em🤦🏾♂️
Same
just came across the same problem. any help?
@@kevingalvez3439 i sent email to gamma and they sent me another bracket bro
Had the same issue on my rebels and I started over fresh and made sure the screw into the lever was tighter and that fixed it
Really nice, it was very helpful. 💯
Appreciate it brother 💪🏼💪🏼💪🏼
How many millimeters is closed with no guard?
How many millimeters is open with no guard?
Yo bro I had a question, is it possible to buy the clicking lever by itself ?
I think so. Hit me up regardless I may have one laying around
I need some help. I tried to Zero gap the clipper i could do it like a wahl clipper.
Shoot me a dm on ig bro I’ll help you out
Do wahl premium guards work with this clipper
yes
Does the sponge thing inside by the motor go like there or more down to stay up ?
I recommend leaving it where it belongs to keep noise levels down or else you can possibly start hearing a different noise on them
Can you use any lever to switch out the clicking one?
I believe the wahl ones fit on it as well but to make it a floating lever all you would need to do is take off the lever and remove the metal piece it comes with that created the click and put it back on creating a floating lever. 👍🏼
I find the clicks very helpful.
I started to like them on the ergos too!
How much do you charge to zero gap? Or do you do it for free if machine is purchased through you?
Can you put a taper blade on these?
Gamma is releasing an all new taper blade stay tuned!
My gammas got mad loud after my 1st haircut I can't for the life of me figure it out 😞
When after I tighten my rogue clippers they still tend to shift
Mines too 😩
You should open the clipper up and see if nothing is Broken. If it is broken it’ll be near where the lever screw tightens up. Check for cracks.
Can you do lineups with these?
You def can but not recommended brother. I would just use a trimmer for best results 👍🏼
How do I know if I’m purchasing the 5v or the 9v version?
The 9v are the newer model and they look way different and also i believe they’ve only released in the uk for now
My wahl blade doesnt fit that clipper... I mean moving blade
Yeah the cutting blades are a bit different same with babyliss
Awesome man thanks
Of course man thanks for watching 👌🏼
Does anybody have trouble erasing the 0 line with these ? Or are mine just not zero gapped enough..
Your clippers are probably not zero gapped correctly brother they should take off the line effortlessly
@@iamcesarq hmm, do you have trouble with the blade moving out of place ?
Same I zero gapped mine but it doesn’t take out the oine like a magic clip does
@@jla8999 same , only have trouble on thick mexican wavy hair
Nice video
Thanks brother
This maccine is a pain in the ass to zero gap, or dissassamble. U should win a certificate to assembly this fucking machine without damaging the screws.
😂😂😂 it takes time and practice to perfect my friend. If you need help feel free to reach out to me
Does anyone have the same problem as me I bought two zero gapped both ... but one side is always higher than the other
I just purchased 1 on Friday and having the same issue.
I even changed rail metal piece that the company sent to 1 of my coworkers to fix his problem and still one side lower than the other and when I move the lever to the 3, 4, 5 click the blades is all crooked
ty bro
I purchased and emailed you about that hope you got the email today 🤩
Yessir got you taken care of brother 💪🏼💪🏼 thank you for the support!
@@iamcesarq Awesome, and always 🙏🏿
The plastic body of the machine is very weak and tends to break easily.😥🥴
How much are the ergos
180 bro make sure to use my code upon checkout to save some mula
first comment
Let’s goo 💪🏼
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did
Hey I’m not sure if it’s a factory defect but on my ergos only the blue lid fits it the black one doesn’t click or fit into it neither does the see through cap, If anyone has had the same problem lmk what yall did