2010 Kawasaki Z1000 Motorcycle Valve or Timing Chain Noise? (Fixed! See Video In Description!)
ฝัง
- เผยแพร่เมื่อ 16 ม.ค. 2018
- [Problem Fixed!] The clicking noise was caused by lose exhaust pipe manifold bolt. See this updated video for explanation: • Motorcycle Engine Clic...
I hear this clicking noise during ridding and engine idle, not sure if this is the normal engine noise or the valve/timing chain tensioner needs service? - ยานยนต์และพาหนะ
![[ไฮไลต์] ฟุตบอลชาย ญี่ปุ่น vs ปารากวัย รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/X_BeGaAv1oM/mqdefault.jpg)
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
i just did my clutch myself and had to remove the exhaust to access it started getting this noise & was super worried the valves where going to need adjusting thnx so much for this video :)
Thanks a lot this solved my issue I had a similar problem with my kz1000
Thanks A LOT man! I've had the same noise on my 99 cbr f4, and wasn't sure what it was. After watching this video I'm 100% sure the noise is the same. Easy fix!
Omg same feeling here this is the EXACT sound I’m getting and have been looking everywhere guess I might as well order new headers while I’m at it 😂😂
@@taylorsmotovlogs3735 literally have the same noise does it appear once the bike is warmed up from cold for you?
Did you find the solution? Mine starts when it is warmed up, it sometimes disappears and after a rew appears
@@SpooK3KingMilk mine does that,any fix ?
@@audiophilipp It was the cam chain tensioner needing replacing on my ninja! Hope that helps. It could be a whole array of different things though.
Finally found someone with the same issue. Good to know you got it fixed. Will go directly to handle mine. I was about to take apart the engine for the cam thinking it was banging. Simple exhaust tightening should fix it right up
Normal sound. Noise is injection fule
@Ric Toffin Did it work?
@@michalprokopec3702 not normal, the guy literally explained the problem and fix his following video.
I had same issue tightened the exhaust bolts sounds good again.
My valquero will click rather loudly after it’s been sitting for a month or so. After it warms up it goes away. Imma checking tightness. Thanks for the video
Did it get Louder with revs
Holy shit yeah, this sounds like my noise. Going to check torque on my header bolts for sure.
I almost wanted to say maybe the reeds for the PAIR valve system .... No idea if they are still using that on newer bikes
Got the same on my 09 z750. I replaced the cam chain tensioner and the washer s from the muffler and replaced the bolts... The ticking becomes quiter but it's still there. I wonder if it's just my stupidness to think this sound is unnormal. Maybe the ticking was always there but now after 3 years of riding I start to think that this ticking sound is new... I don't know. I just have panic that my motor is fucked up🙁
Whats that sound at 0:17?? Im having same sound on my bike when its warming up.
What’s the torque specs
I have the same problem with my Z900. Today I took my motorcycle to its first service, but they said they could not hear any abnormal noise. I have the same ticking noise, but not so loud and the noise goes away in lower RPM.
All kawasaki Z series have a very loud fuel injection system. Clicking Noise actually comes from the fuel rail if you listen closely.
noticed the exact same noise on my z900rs today, but it is a brand new bike, only got 1000km on it. Can this be the problem then?
Easy to check, just wait till engine is cold and try to tighten the bolts to see if any of them is loose.
OMG that's the same clicking/ticking noise i'am getting from my cb400sf. Went to several shops to ask if its the valves or timing chain or tensioner but they all said the sound is normal and that i don't need to do that till after at least 80k km.
I have same bike same noise, any fix?
Mine makes exact same noise but I’ve replaced the header seals and tightened it and changed nothing idk what it is if theres a tiny hole i cant find it
there shouldn't be any hole or oils will spill out. If exhaust bolts are properly torqued when cold then the noise might be timing chain
My bike have this clicking noise but its not clicking..it just clicks about every 3 seconds especially when i turn on my bike.
My bike is a zx10r 2017yr. It sounds exactly like your video, but it wasn't a manifold exhaust pipe bolting problem. . When I turn up the RPM, the tapping sound gets louder together, and the sound is intermittently produced in the idle state. I also replaced and set the cam chain tensioner, but other noises are removed and this tapping sound is still there. I went to the repair shop and they said it wasn't a valve problem, but I was wondering if there were other causes.
when I served on my old scooter, the valve when incorrectly adjusted or out of tune might hit the top of the engine cover causing the tapping sound, but I have not experienced this problem on the Z1000, you may want to just take it to Kawasaki authorized dealer to have tech check it out, maybe the tapping sound is normal part of engine operation.
hi man! I have the same problem. Do you have yomething now about it? was it the timing chain and/or its tensioners? thank you:)
Hi, do the noise disappears or it is all the time?
Sveikas, kas tau buvo? Nes turbūt klausei kai dinginėjo toks panašus garsas, kame bėda?
Dis you find the problem?
Yep th-cam.com/video/1u9TYJuNjv4/w-d-xo.html
ese sonido si es valvula
Gaskets: Kawasaki part #11009-1840 (x4)😮
Bruh shit was driving me crazy I was like sounds like air but from were from lmao now ik
mine had a leaky manifold gasket
glad you found the problem!
Just change the cam chain tansioner not the whole chain ?
all normal im dont know
Just check your valve clearance. That’s not a cam chain noise , it’s the valve shims. Looks like something is getting tight on your left side
If it's tight it wont make any sound.
We must put a name on this ugly noise! Have the same sound, and it gets louder with mileage. It sounded better after oilchange before but now it dont help with that anymore.. ihave Kawasaki service everytime😢😢😢
Mine is z1000sx 2020
Ya need to check the exhaust bolt torq regularly on Z1000
@@TheGizmoGarage i tide them, and it sounds much better. I'll check all of the exhaust later.. thanks to your advice, the bolt was little lose.. drive safe, prayed for you🙏.thanks
@@Ahmed_1981 check the brake pads too. The backing plate was rattling on mine + worn header gaskets.
Hi! I just raplaced today the 4 manifold gaskets, but the problem still exist... Maybe it is because the mechanic didnt replace the old bolts?
recheck the torque on those bolts when engine is cold? Usually newly replaced gaskets will require a torque check after riding your bike for couple times
I *might* have a similar issue but I'm not sure. Based on what you describe, it sounds very similar.
Here's my video: th-cam.com/video/lbj_5LI5Fvk/w-d-xo.html
See my other video of my old Triumph 995i Spirit RS sound, the bike will always have a bit of "ticking" noise... th-cam.com/video/Jkl9OYf2KnE/w-d-xo.html
Get a Harley
Harley themselves wants to reinvent their brand so bad since their sales has been slipping day by day when younger generation of riders started to enter the bike scene... by offering a very compelling E-bike... However that has failed horrendously since die hard Harley fans of last generation just would not budge... We'll see where that will lead Harley into over the next decade.