I have the same tool. On page 8 of the instruction manual, under General Operating Instructions, it says "WARNING. Do not use sand for blasting." Further down, it states that compressor pressure should not exceed 90 psi. I had no problems, after reading the manual. That's what it's for.
Not sure which manual you're looking at, but that's not what it says. The warning is specifically regarding using sand with silica, and it's NOT that the unit can't use sand, the warning is specifically about breathing silicosis and aluminum oxide.
Impressive! I love you didn't quit and your modification worked!! For people seeking an inexpensive sand blaster, this video shows how the mod is done. Once again, Friends, Live and learn! Thanks, Anatollii!
Dude, you just saved me so much sanding. Tryed the gun yesterday, didnt work. Been procrastinating sanding the molding on 10 oak doors for my friend, your a life savour man !
Nice details, I have an old one that I never use because it never worked well. Going to work on that. Very handy to not have to pull out the big blaster for small jobs.
I just brought one of those guns and same thing out the box it did not work so thank you very much for making this video it helps alot cause I was about to take it back to the store
@@23steph13 I’d like to say it went well, and I did get it done. Works incredibly well. Just took about 8 times the length of this video. LOL But worth the effort.
Thanks for this mod video and sizing on bits/holes. I know this is 2 1/2 years old, but for folks that are coming here later, it does indeed say not to use sand. However, I found a decent work around to get consistent media size from Home Depot sandbox sand. I first put the sand out on a tarp to dry in the sun - Then use a mesh strainer you can get from Walmart/Target and filter into a milk jug/soda bottle through a funnel. It takes out the largest pebbles and gives a generally consistent media without clogging.
@@coldspring624 You don't blast the beach sand at high velocity on metal plates while breathing the dust though. The NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
Man you are a true blue Harbor Freight customer. Harbor freight sandblaster. Harbor freight cordless drill and those dangerous gold drill bitts that snap in a heartbeat . I drilled a piece once like you did. Held the piece to be drilled in one hand while drilling with the other. The bit snapped and I drilled right through my thumb with the broken bit that was left in the drill. What a bloody mess . I NEVER buy drill bits from Harbor Freight anymore.
You have a 50/50 chance with this sand blaster, I did the modifications and it works great now but the guy next door to me, his worked right out of the box. I am also glad you remind everyone to wear goggles and gloves are a good idea as well, Thank you.
@@nateb4543 Not just the paint dust. The very sand itself that is being used for blasting here contains silica and you can end up with silicosis which is no joke.
Holy Cow! Some hobbies should not be tried without researching the danger or hazards! When I saw you hold the metal with a bare hand and I was already concerned when you stated going to home depot for a bag of sand... If you accidentally pass that over your bare hand it can take off flesh. Sand is risky, even with a dust filter, when you take it off the dangerous dust is lingering in the air. Yes some sands are safer than others but why mess around, get some blast media.
Just picked up one of these today along with a used 5.5 hp compressor for $70.00. Hooked everything up and loaded the gun with glass heads. I’m going to etch glass. Cut a stencil on my Cricut, stuck it on a glass I wanted to test on and it was fantastic. I live in SW Florida so humidity is a way of life here. Installed a desiccant moisture absorber in line and went to town. I am throughly empresses with thing. It does a great job.
It does work out of the box if you use the proper media. Home Depot sand is made for a child's sandbox. It does not have a consistent grit size. I've used glass bead & aluminum oxide with great success. Moisture will clump the media and clog the gun, you need a water separator right at the gun.
I followed this recommendations and the blasting improved a lot, but still was not good for the task at hand. I was trying to remove old paint from a porch light and it failed miserably. My compressor does not hold 90 psi for more than a second or two, it drops to 60 very quickly, so that might be my problem and not the improved modified gun. Thank you.
NOT supposed to be using sand through this gun. Says right on it not to use sand. Glass beads worked great through mine. No issues. Haven’t tried baking soda but should work too. All this extra work was unnecessary
NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
The most important factor in any media blasting is having the proper media. Home Depot sand is not made for sandblasting. It has tiny rocks, pebbles, and debris in the bag. You need either sand made for sandblasting, or you can filter your own sand through a screen to remove the larger particles that are clogging the valve and the tip on the gun.
you can use river sand if you dry it out first i use a metal bucket on a propane burner to dry the sand quick and easy damp sand will clog any sand blaster
"silica dust is very hazardous to inhale." silica dust is really bad, it lingers in their air and doesn't settle, then becomes airborn. most states have banned it's use. it's worth the spend to go to a tool shop and buy the proper sandblasting media, plus get advice on the right material to use for your job.
@@LatinDanceVideos Blasting media is quite expensive especially if you don’t have a way to recover and recycle it I don’t agree with banning the use of silica sand just saying it’s dangerous or hazardous isn’t the best warning either they should put the definition of silicosis then people could make an educated decision to use a respirator or not
I found sacks of black grit at Menards. I think it was eleven bucks or so. It works great but you are constantly refilling the hopper. I tried baking soda today. I dont think it's as aggressive but it lasted a lot longer. I bought sand and it didnt go through, im sure glad it didnt, the comments said I would have Silicosis right now. I have a respirator so i might get a second gun to modify.
Yeah mine is doing the same, Just thought it was a piece of scheisser, Didnt think about doing that mod, Guess i will be taking it to work tomorrow to modify when i get a spare 5 minutes
I’ve had one of those for a long time. Has never performed properly, like yours. I’m gonna make those mods. Get a hood. Keep the media out of your face and hair. Also filter your media with a 5gallon bucket and window screen. You can figure out how. I used the bucket lid to hold the screen with about an 8 inch hole in it to hold the screen. I use play sand and filter (screen) it. Or you can get blasting sand from some hardware stores.
I gotta strip the paint off some old steel wheels for a repaint. Liquid strippers barely phase it. A 2400psi pressure washer with the needle tip does not phase it. Think this would do anything?
Анатолий, здравствуйте. Спасибо за видео, собираюсь обзавестись таким же или подобным. Как вообще впечатления от аппарата после доработки? Можете рекомендовать ?)
Wow, I was going to say the problem from the start was not having a moisture filter, but by widening those holes, you have a mega blaster. You now have a gun that covers a bigger area. Such an awesome modification. What air compressor are you using?
Obviously not an experienced user. You’d think, however, that someone could kinda figure out that if the tool is meant to remove paint and rust, it MIGHT be wise to: a)wear some good gloves and b) keep your hands and other body parts away from the nozzle. C) wear a mask or better yet a respirator and goggles or a face shield.
Thanks for the video, I did the modification on mine but it still didn't work properly. Can you please tell me what size air compressor you used? I have a Dewalt 16 gallon compressor, I used play sand and also tried black diamond media. Could the compressor size be the issue? Thanks
This is perfect for those wanting to blast coarse media yes it's probably not intended for it but it obviously works so i dont see the issue for all the ppl wining
I have the same tool. On page 8 of the instruction manual, under General Operating Instructions, it says "WARNING. Do not use sand for blasting." Further down, it states that compressor pressure should not exceed 90 psi. I had no problems, after reading the manual. That's what it's for.
Not sure which manual you're looking at, but that's not what it says. The warning is specifically regarding using sand with silica, and it's NOT that the unit can't use sand, the warning is specifically about breathing silicosis and aluminum oxide.
Impressive! I love you didn't quit and your modification worked!! For people seeking an inexpensive sand blaster, this video shows how the mod is done. Once again, Friends, Live and learn! Thanks, Anatollii!
Outstanding modification! I REALLY appreciate you going through he steps AND bit sizes. Good job!! Going to buy one tomorrow.
Dude, you just saved me so much sanding. Tryed the gun yesterday, didnt work. Been procrastinating sanding the molding on 10 oak doors for my friend, your a life savour man !
Awesome video. Thanks for taking the risk on the modification of your new tool and for sharing with us!
I just bought the same unit, and out of the box it failed to work, thank you for showing how to modify, good job
Nice details, I have an old one that I never use because it never worked well. Going to work on that. Very handy to not have to pull out the big blaster for small jobs.
Good job dude. You got that thing working great !!!!
I just brought one of those guns and same thing out the box it did not work so thank you very much for making this video it helps alot cause I was about to take it back to the store
Found me a new tool to have for my shop. The mods worked great. Thanks for sharing
Great to hear!
You saved my weekend project(my problem) thanks for the share
Excellent video I'm going to buy the gun today , thanks for the info
Awesome job on the modifications thanks ,thats exacly what I need it for ...
Justt bought one yesterday. I'm gonna make the modification before I even use it . Thank you, sir.
How did it go?
@@23steph13
I’d like to say it went well, and I did get it done. Works incredibly well. Just took about 8 times the length of this video. LOL
But worth the effort.
Wow , I have the same gun with the same problem, I'll be doing what you have done , first thing in the morning, thanks
👍 will do this before using the one I bought. Thank you for making this.
Thank you for the review friend! Very helpful on my end!
Soda didn’t didn’t do anything to the powder coating I was trying to remove.
Thank you so much for the help. Sand (dry sand) worked like a charm.
What kind of sand can you use once you make this modification?
@@brianbutterworth8186 Play sand from Home Depot.
Thanks bro. Just what I need for my bicycle projects
Thanks for this mod video and sizing on bits/holes. I know this is 2 1/2 years old, but for folks that are coming here later, it does indeed say not to use sand. However, I found a decent work around to get consistent media size from Home Depot sandbox sand. I first put the sand out on a tarp to dry in the sun - Then use a mesh strainer you can get from Walmart/Target and filter into a milk jug/soda bottle through a funnel. It takes out the largest pebbles and gives a generally consistent media without clogging.
you should use crushed glass instead of sand because sand is bad for your health some countries have band the use of it
@@TotoGuy-Original stay off the sand beaches on a windy day right
@@coldspring624 You don't blast the beach sand at high velocity on metal plates while breathing the dust though. The NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
Great review. Thank you very much!
Man you are a true blue Harbor Freight customer. Harbor freight sandblaster. Harbor freight cordless drill and those dangerous gold drill bitts that snap in a heartbeat . I drilled a piece once like you did. Held the piece to be drilled in one hand while drilling with the other. The bit snapped and I drilled right through my thumb with the broken bit that was left in the drill. What a bloody mess .
I NEVER buy drill bits from Harbor Freight anymore.
Thank you very much for the demo on the mod. very helpfull
how many psi you use
You have a 50/50 chance with this sand blaster, I did the modifications and it works great now but
the guy next door to me, his worked right out of the box. I am also glad you remind everyone to
wear goggles and gloves are a good idea as well, Thank you.
What media do you use
I've heard a lot that a respirator or mask is very important. Guessing it makes paint dust or something.
@@nateb4543 Not just the paint dust. The very sand itself that is being used for blasting here contains silica and you can end up with silicosis which is no joke.
@@Hereford1642 ya since this comment i strained sand i had for blasting, there was a bunch of dust and looked it up. Now i wear a reapirator
@@nateb4543 My work here is done.
Nice job looks like it works much better
thanks Anatoli. Mine worked out of the box but not as good as i wanted. Im gonna mod it like you showed.
Thanks man, this is the same problem I am having with mine.
Holy Cow! Some hobbies should not be tried without researching the danger or hazards! When I saw you hold the metal with a bare hand and I was already concerned when you stated going to home depot for a bag of sand... If you accidentally pass that over your bare hand it can take off flesh. Sand is risky, even with a dust filter, when you take it off the dangerous dust is lingering in the air. Yes some sands are safer than others but why mess around, get some blast media.
I found that making sure sand is dry without moisture and i also siffted the sand makes it work great !
Thanks man! Great share! God bless you brother!
Just picked up one of these today along with a used 5.5 hp compressor for $70.00. Hooked everything up and loaded the gun with glass heads. I’m going to etch glass. Cut a stencil on my Cricut, stuck it on a glass I wanted to test on and it was fantastic. I live in SW Florida so humidity is a way of life here. Installed a desiccant moisture absorber in line and went to town. I am throughly empresses with thing. It does a great job.
Thanks for this video... I have this Air Gun too... Ans this problem too.... Now i know what i must making. Thanks
Nice job. Just bought one and will make the mod.
It does work out of the box if you use the proper media. Home Depot sand is made for a child's sandbox. It does not have a consistent grit size. I've used glass bead & aluminum oxide with great success. Moisture will clump the media and clog the gun, you need a water separator right at the gun.
What grit sand do you need to use ?
@@hunterwingler543 I got decent results with 100/170 glass bead
I bought same model as you and have the same issue...gonna try those modifications, thanks
Nice mods, impressive, thanks for sharing 👍😃
Going to give this a try!!
Great video!
Well done brother. Thanks for sharing your advice with us !
oh it does work you just need to get proper blasting media sand from home depot is not good most likely too much moisture , works great with soda
This is awesome! Great work! Also putting that little black car clip in that top hole is fucking genius lmfao. Thank you!
excellent - nice job! thanks
Thanks
Awesome modification thank you for sharing. 🤗🎸🌏FNZealand
excellent pistolet !!
Good job!
Exelente amigo ,saludos desde chile
Brilliant mod.... Gonna tear mine apart now.
very helpful, thanks
I followed this recommendations and the blasting improved a lot, but still was not good for the task at hand. I was trying to remove old paint from a porch light and it failed miserably. My compressor does not hold 90 psi for more than a second or two, it drops to 60 very quickly, so that might be my problem and not the improved modified gun. Thank you.
NOT supposed to be using sand through this gun. Says right on it not to use sand. Glass beads worked great through mine. No issues. Haven’t tried baking soda but should work too. All this extra work was unnecessary
gr8 video cheers
Thanks for the information.
Great video
Spasibo! Dosvdanya хорошо! спасибо!
NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
Nice mod. I might revisit mine ($0) vs buying a new sandblaster. I just have a small job to do
The most important factor in any media blasting is having the proper media. Home Depot sand is not made for sandblasting. It has tiny rocks, pebbles, and debris in the bag. You need either sand made for sandblasting, or you can filter your own sand through a screen to remove the larger particles that are clogging the valve and the tip on the gun.
You're just talking about the fancy sandbox sand that you can get at HD.
Definitely tried to run to thick of a media and a water/air filter would help as well but still good video man
Nice Bro!
good job, sir
Thanks
you can use river sand if you dry it out first i use a metal bucket on a propane burner to dry the sand quick and easy damp sand will clog any sand blaster
Definately working now
The "O" ring took you right back to a small opening.
I had the same problem. Unfortunately, I didn’t see this video until I returned mine to the store.
When blasting with sand use at least a dust mask as silica dust is very hazardous to inhale.
"silica dust is very hazardous to inhale."
silica dust is really bad, it lingers in their air and doesn't settle, then becomes airborn. most states have banned it's use. it's worth the spend to go to a tool shop and buy the proper sandblasting media, plus get advice on the right material to use for your job.
@@LatinDanceVideos Blasting media is quite expensive especially if you don’t have a way to recover and recycle it I don’t agree with banning the use of silica sand just saying it’s dangerous or hazardous isn’t the best warning either they should put the definition of silicosis then people could make an educated decision to use a respirator or not
@@Ezekiel-OffRoad Yup... lungs are more expendable. This video is dangerous, the sand is illegal in the US.
I think it works much better than the other bigger ones, right?
I found sacks of black grit at Menards. I think it was eleven bucks or so. It works great but you are constantly refilling the hopper. I tried baking soda today. I dont think it's as aggressive but it lasted a lot longer. I bought sand and it didnt go through, im sure glad it didnt, the comments said I would have Silicosis right now. I have a respirator so i might get a second gun to modify.
Have the same gun don't work thanks will try this thumbs up.thanks again 👍😀👌😊🙂
How big was your compressor. Maybe that was the problem, plus moiture. But well done. A+
Ok I’m intrigued and totally gonna try it. What size air compressor are you using please?
Thanks for sharing!
The bigger the better. They recomended 90psi pressure and with small air compressor you will be waiting more then blasting.
Great !
Thank you.
I almost dumped the damn thing.
Yeah mine is doing the same, Just thought it was a piece of scheisser, Didnt think about doing that mod, Guess i will be taking it to work tomorrow to modify when i get a spare 5 minutes
Exelente yo compré una pero salío defectuosa de la entrada de aire estaba quebrada. Saludos
ah crap! just bought. didn't work either. time for mod. thanks! I was using walnut shell, probably much bigger than soda or glass bead.
Thanks for the link to product 😅 good review but how can I find this particular blaster?
I’ve had one of those for a long time. Has never performed properly, like yours. I’m gonna make those mods.
Get a hood. Keep the media out of your face and hair.
Also filter your media with a 5gallon bucket and window screen. You can figure out how. I used the bucket lid to hold the screen with about an 8 inch hole in it to hold the screen. I use play sand and filter (screen) it.
Or you can get blasting sand from some hardware stores.
How much blasting media do you use with these modifications in place?
I gotta strip the paint off some old steel wheels for a repaint. Liquid strippers barely phase it. A 2400psi pressure washer with the needle tip does not phase it. Think this would do anything?
Did you use actual sand? Or abrasive made for a sandblaster
How many horsepower and scfm are you running from the compressor?? Thanks David
Fi like the mod, but wonder if it would stil work if blasting with SODA? Or is it only used, no, with sand like media? Thank you.
Like a day at the beach
Анатолий, здравствуйте. Спасибо за видео, собираюсь обзавестись таким же или подобным. Как вообще впечатления от аппарата после доработки? Можете рекомендовать ?)
Nice mod! :) Any chance to share your compressor specs? FAD / Actually Delivered l/min
thanks
dumb question. when he drills out the gun he said all the way to? or through? the bottom? not through and through right?
Great job!!! You used sand or what kind of sand you used it pliz can u tell me thanks
Play sand from Home Depot
whats the compressor psi you are using buddy?
Wow, I was going to say the problem from the start was not having a moisture filter, but by widening those holes, you have a mega blaster. You now have a gun that covers a bigger area. Such an awesome modification.
What air compressor are you using?
follow
your voice sounds similar to sylverster stallone :)
This guys spraying an inch away from his fingers.. fucking legend.
Obviously not an experienced user. You’d think, however, that someone could kinda figure out that if the tool is meant to remove paint and rust, it MIGHT be wise to: a)wear some good gloves and b) keep your hands and other body parts away from the nozzle. C) wear a mask or better yet a respirator and goggles or a face shield.
what size of sand did you grab at home depot
Thanks for the video, I did the modification on mine but it still didn't work properly. Can you please tell me what size air compressor you used? I have a Dewalt 16 gallon compressor, I used play sand and also tried black diamond media. Could the compressor size be the issue? Thanks
The capacity of the compressor only influences the possible duration of sandblasting.
The grain size of the medium may be too coarse.
Can you use soda with it?
This is perfect for those wanting to blast coarse media yes it's probably not intended for it but it obviously works so i dont see the issue for all the ppl wining
What’s the power of your air compressor thanks.
Awesome video! What size/model of compressor are you running? Thanks in advance!
Answer please
You need to use atleast 100 PSI
Do it only work on aluminum
Do you think this device would work on raptor paint with sand??