@ I’ve gone thru 3 seals 1 been the original that blew out and was lost, the other 2 have been replacement ones. They have both been pushed in as far as they can, exactly the same to feel as my friends truck, as soon as it drives they pop out
@@ReazY_Not In that case I would probably check "camshaft end play" or maybe even see if you are getting "Blow by" because the pressure could be pushing them out?
@@ReazY_Not I would definitely check the PCV valve and try driving it with out it connected making a restriction and see what happens. If it solves it it's either the valve or your piston rings/cylinder bores are knackered.
Did you have any problems with the rear cam seal coming back out after you had replaced it?
@@ReazY_Not Hi, thanks for watching.
No I personally didn't but if your's has it may not be in square or pressed in enough.
@ I’ve gone thru 3 seals 1 been the original that blew out and was lost, the other 2 have been replacement ones. They have both been pushed in as far as they can, exactly the same to feel as my friends truck, as soon as it drives they pop out
@@ReazY_Not In that case I would probably check "camshaft end play" or maybe even see if you are getting "Blow by" because the pressure could be pushing them out?
@ yeah it does have a fair amount of blow back when oil fill cap is off
@@ReazY_Not I would definitely check the PCV valve and try driving it with out it connected making a restriction and see what happens.
If it solves it it's either the valve or your piston rings/cylinder bores are knackered.