I just did a large 4 way die with the plasma cut and stacking method after not being able to find what I needed for a reasonable price. I ran a weld bead along the inner edges of the V profiles and carefully ground it down which left a nice clean edge. It look a lot of time but it works great and saved me about $800.
Love your homemade dies, this is on my to do list now. FYI I found that if you use a thin plastic sheet like 10 mil between your part and the bottom die you can stop the bottom die from leave any marks on your part ( using factory made dies). Still I bet this would greatly help on your home made dies.
ToT has a video on some sort of toolsteel welding filler, you could build up the edges with that to make them last. And maybe get yourself a milling machine, then you can really clean them up nicely.
Could you just use a piece of metal that you press into shape on a die, and weld it to the die. That way the surface is flat and keeps the surface finish nicer possibly
Those dies are awesome, is it possible to cap the die with solid material down both sides and weld it on? I've got a 40 ton 4 ' brake with 4 way die and that shiot is crazy exspensive, hell it was crazy money when I bought it 20 years ago. I run a 10 " 4 way die in my Edwards Iron worker tooling station and I think that die set is almost a couple grand these days. That 4' 4 way die is a mother fker to change out, gotta really be in love with your fingers when messing with that thing.
I’ve never used angle to make a die, my fear is that material spring back would keep you from hitting 90 degrees. This fear may be unfounded, again I haven’t tried.
I just did a large 4 way die with the plasma cut and stacking method after not being able to find what I needed for a reasonable price. I ran a weld bead along the inner edges of the V profiles and carefully ground it down which left a nice clean edge. It look a lot of time but it works great and saved me about $800.
Love your homemade dies, this is on my to do list now.
FYI I found that if you use a thin plastic sheet like 10 mil between your part and the bottom die you can stop the bottom die from leave any marks on your part ( using factory made dies). Still I bet this would greatly help on your home made dies.
Man that's really helpful. I've got an iron worker I want to build a bending die for man they are spendy.
ToT has a video on some sort of toolsteel welding filler, you could build up the edges with that to make them last. And maybe get yourself a milling machine, then you can really clean them up nicely.
Could you just use a piece of metal that you press into shape on a die, and weld it to the die. That way the surface is flat and keeps the surface finish nicer possibly
@@abarry48 I haven’t tried. There are plastic films to liner the dies too.
@ I was thinking plastics too but either would possibly help! Awesome build man! Just found your channel. Hooked now
Nice job 👍😎👍
thanks for sharing
Those dies are awesome, is it possible to cap the die with solid material down both sides and weld it on? I've got a 40 ton 4 ' brake with 4 way die and that shiot is crazy exspensive, hell it was crazy money when I bought it 20 years ago. I run a 10 " 4 way die in my Edwards Iron worker tooling station and I think that die set is almost a couple grand these days. That 4' 4 way die is a mother fker to change out, gotta really be in love with your fingers when messing with that thing.
Yeah you could do that or cut the plates without the bottom tang.
@ ultra4suzukisamurai679 are u willing to share the model or any drawing of your homemade press?
@@Overhaul_zoo_engineersx2 email me at downingbrianfab@gmail.com
@@ultra4suzukisamurai679I also sent you an email requesting info on your press brake when you aren’t busy. Thanks for your work!
@@ultra4suzukisamurai679 email sent to you thanks again!
Great video show more bending. What state you in?
I’m in Oregon. Next time I use the brake on a project I’ll video it
Would it make sense for me to stack 12” length pieces of angle iron for a V die?
I’ve never used angle to make a die, my fear is that material spring back would keep you from hitting 90 degrees. This fear may be unfounded, again I haven’t tried.
You could probably have it cut out of AR500 or something to make them more wear resistant.
Hi, are you looking for a plasma table? I’ve got a 5x10 that also has the tube cutter option as well. Let me know. I can help you out as well.
I have a plasma table already. Thanks though!
@@ultra4suzukisamurai679 what part of the country are you in? I’m west coast
Oregon