Hey Mitch! Any chance you could do a brake replacement video for the Honda Ruckus? I'm not sure what parts I need or how to do it. You have the best videos! I was able to replace my carb and puel pump with your help! Now I just need a brake job. Thanks man!
I just picked up a 2009 Vino. Really glad I found your channel. Great instructional videos. After the oil change I need to trouble shoot the fuel gauge.
Thank you very much Mitch for your par excellence tutorial on changing the oil on the Vino! I greatly appreciated it. Working like new again. Thank you Mitch. You deserve an Award!
Very well done!👍No wasted effort in a descriptive, clean, and thoroughly done vid. Subbed and rung the bell. Just brought my 2004 Vino home yesterday. Hope your library is large
Mitch you are a god I'm in Canada I have vino 125 and because of all your help I have got my bike "Pride n Joy" running amazing I just had it clocked at 106 km thanks
Yeah I bought a filter for it 10 years ago, but even the company repair / owner's manual says nothing about where the oil filter goes. Finally got to use the filter I bought 10 years ago yeah! :-) Very helpful video, thank you!
Thank you. It's January 2024 and I just got a Yamaha Vino 125 that I traded for a sick Peavey RJIV bass made in USA. I was hesitant at first because it rode wobbly, until my neighbor told me my rear tire was low. After I filled it up at the local Shell station it rode 100% better, and now I get it. Scooters are so much fun and being a Yamaha Stryker 1300cc owner, this is WAY more fun.
Just picked one up from my neighbor for 60 bucks. 9k miles sounds and runs great but a lot of surface corrosion from sitting in a wet basement. Got it for my mom she loves it. Thank you so much for the video it was very helpful
This was absolutely great, I mean really great. The detail --the thoughtful attention to the camera angle and what we need to work on. An A+ Video way to go. Keep them coming.
Superbly filmed, to the point, and super easy to follow, all the details and torque references clearly displayed, must have taken you an age to edit, no doubt you saved me much time, such a great video as are all in the series, actually I have a Yamaha Forte 125cc which I think has the reference SV-125 or XC125 and it’s the same engine - thanks very much.
Thank you Mitch for your videos helped me out a lot...i changed my oil using your vid rather than the manual. How come the manual makes no mention of the strainer and drain plug on the bottom of the motor? I would have never known it was there.
Thanks for doing these awesome videos. The carburetor video was a lifesaver for me. Regarding the oil change, Getting the oil filter housing off and back on was such a pain. The two 10mm bolts specifically. I used a ratchet with a 6" extension as you noted in the video and I watched you do it about 20 times over and over. It looks like you were able to get a straight shot with the extension/socket onto both bolts. I couldn't get enough of a straight shot to reinstall those two bolts. I ended up removing the plastic floor of the scooter with the battery box to try to get more open room to approach the bolts. Major pain and waste of time. I keep wondering what I'm doing different (wrong) vs what you are doing in the video. I'm sure it's user error on my part. LOL.
Hi there. thanks for your video. just wondering, when you check the oil level. The bike is on the center stand, that means the bike is not straight. is that a good reading? thank you.
Super helpful video, I just changed the oil and transmission fluid yesterday. My brother just gave me his Vino 125. It only has 490 miles on it but it's been sitting for about 10 years. I've never owned a Moped before. Do you have a Brake fluid change video? Also what would you suggest I do before trying to get this thing running again? I had to spray WD-40 in the gas cap because it was stuck. I've drained the gas from the tank and there's gunk. I was planning to drain and replace the Brake fluid, and was contemplating taking out the tank and cleaner the carburetor, but wasn't sure if pouring new gas and then trying to see if I can get it started was a good idea or not :).
I purchased one similar to what you deacribed. Has 478 miles but sat for 7 years. My fuel tank was full of crud and rust, definitely pull the tank out and clean it. People have suggested to run an inline fuel filter to catch any possible remains from the tank. I’m also planning to clean the carb following mitch’s video.
Mitch you are very talented! I grew up on Outerbanks of NC Cape Hatterss in my back yard! I am old salty crusty surfer dude retired now on kidney dialysis I love riding motorcycles I rode 1992 Suzuki DR 650 from Beaufort NC to Costa Rica and back in 92. Love watching you work on scooters I am handicapped neck been broken 3x thoracic back vertebrae all broken by 16 yr old girl licensed 6 days 2014 . So now looking to sell my two bikes and get into scooters easier for me to handle! I weigh 200 5’10” I like Suzuki 650 Burgman do you think it would suit me?
Hey sorry I just saw this! 😆 Wow what a story! I'm glad you are still alive after the accident... stupid girl ugh! Burgman 650 is a sweet scooter... I suggest to find one and try get on it to see if you feel comfortable... sit on it... feel if it's too heavy or not... suit you, yeah sure... it's good bike!
@@MitchsScooterStuff Thank you I saw where surfs cooking out your way. I used to surf big waves Fiji Hatteras Australia and my cousin lives in New Zealand. I caught California break couple times it was like monster shore break no thank you! At least there you have reef break there. Be careful!
Ok I saw a few of your vids Jody but steal have not found none on what kind of gear oil to use in a 2004 Yamaha vino so can you tell me what kind some one said 80/90 gear oil
What’s the absolute best oil to use for Yamaha vino? I just got one and I wanna do exactly what you did. Brand new clean up oil job I just don’t know what the best stuff to use The secrete stuff
Love your videos and I just question the strainer how can I clean it if I don’t want to buy a new one can I rinse it with water and dried off what type of soap if so how would I do it thanks
My 125cc Hyosung scooter just has has a mesh filter that comes out in one go. Why is this one so complex ? I don't have the oil filter. Is Hyosung cheap skate ?
Hey, I am not into Motorcycles at all and I'm only interested in scooters ... my friend has a 1987 Honda 750cc motorcycle he wants me to rebuild it but I have so many scooters waiting to get fixed up :)
I just finished up all of this, it's drank 2 quarts of oil and I'm not getting a reading on the sight glass. It also sounds like my engine is trying to seize when I start it.. any help??
@@MitchsScooterStuff haven't had a chance to check much yet, I'll be heading out to work on it tonight. Some guys on a Facebook group think it's a crankcase pressure problem and probably has something to do with the emissions delete I followed from you. Probably going to throw all of that back on and hope my engine isn't messed up, it didn't sound great that's for sure..
Yeah it sucks but not too bad just have to do every 4,000 miles... Vino 125 is one of best scooter I ever ride... it handles amazing but not impressed with motor performance since Buddy 125 can go faster!
Hello my name is Shaun I live in Canada I have an 06 Vino 34,000 km the CDI box went on it we can no longer get them in Canada Yamaha will not ship them to Canada because of our market I’m stuck with a bike now that I can’t get a CDI box i’ve tried eBay Kijiji trying to get a used one can’t find one do you know anybody that can get me a CDI box for that bike with a little bit lower mileage there’s just no way I can get the CDI box in my country I’m just frustrated with the bike Please let me know thank you Cool your videos
Dude, seriously, you replace the oring AND the copper washers each time, the washers are a CRUSH item , one time use! As is the drain plug washer, REPLACE ! As always replace the ORING. Smh..
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
*** Tools I used in this video:
Engine oil - amzn.to/3fHZlPr
Phillips #2 screwdriver - amzn.to/2fgdZDL
Flathead screwdriver - amzn.to/2jN7lpE
Ratchet 1/4 drive - amzn.to/2xcJEu1
3” / 6” extension set 1/4 drive - amzn.to/2wDuzzW
10mm socket 1/4 drive - amzn.to/2yrXjxp
12mm socket 1/4 drive - amzn.to/2UIPPD4
19mm socket 3/8 drive - amzn.to/2CiXNqo
1/2 to 3/8 drive socket adapter - amzn.to/2EqLzQm
Breaker bar 1/2 drive - amzn.to/2HenuMI
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
Oil drip tray pan - amzn.to/3brpgIO
Funnel (short) - amzn.to/2HY4m6g
Rags - amzn.to/2Yh8jvg
Hey Mitch! Any chance you could do a brake replacement video for the Honda Ruckus?
I'm not sure what parts I need or how to do it. You have the best videos! I was able to replace my carb and puel pump with your help! Now I just need a brake job. Thanks man!
This is a masterpiece. Thank you so much, it helped me a lot. All those different view angles made this job easier.
Great to hear!
I just picked up a 2009 Vino. Really glad I found your channel. Great instructional videos. After the oil change I need to trouble shoot the fuel gauge.
Working on the gas gauge now new sending unit should do it
Thank you very much Mitch for your par excellence tutorial on changing the oil on the Vino! I greatly appreciated it. Working like new again. Thank you Mitch. You deserve an Award!
You're welcome!
Very well done!👍No wasted effort in a descriptive, clean, and thoroughly done vid. Subbed and rung the bell. Just brought my 2004 Vino home yesterday. Hope your library is large
Thank you! Awesome enjoy your vino!
Extremely good video. Super helpful. Straight to the point. Showed bolt locations and torque specs... amazing thank you.
Mitch you are a god I'm in Canada I have vino 125 and because of all your help I have got my bike "Pride n Joy" running amazing I just had it clocked at 106 km thanks
Great video, i have own a vino for over 10 years, did not notice where to change the oil filter, thanks a lot ! keep youtubbing please
Thanks! Wow!! Funny glad you know about the filter 😄 You're welcome! More to come!
Yeah I bought a filter for it 10 years ago, but even the company repair / owner's manual says nothing about where the oil filter goes. Finally got to use the filter I bought 10 years ago yeah! :-) Very helpful video, thank you!
Thank you. It's January 2024 and I just got a Yamaha Vino 125 that I traded for a sick Peavey RJIV bass made in USA. I was hesitant at first because it rode wobbly, until my neighbor told me my rear tire was low. After I filled it up at the local Shell station it rode 100% better, and now I get it. Scooters are so much fun and being a Yamaha Stryker 1300cc owner, this is WAY more fun.
That’s awesome to hear! Enjoy the ride 😊🤙🏼
Just picked one up from my neighbor for 60 bucks. 9k miles sounds and runs great but a lot of surface corrosion from sitting in a wet basement. Got it for my mom she loves it. Thank you so much for the video it was very helpful
I found your Vino 125 tutorials super useful & informative. I just got a 2006! Excellent work, Thank you!
Hey welcome! Glad to hear that! Ride safe!
This was absolutely great, I mean really great. The detail --the thoughtful attention to the camera angle and what we need to work on. An A+ Video way to go. Keep them coming.
Appreciate it!
Thank you for your detailed and yet fast pace description of the process.
Excellent job. So helpful. At 2:22, that is a crush washer, not a "gasket," on the oil pan drain bolt.
What size crush washer is that??
I want to know the same thing I found the gasket part number is 90430-08816-00
I want to put a crush washer on is that ok?
@@justinhowell4849 I use a crush washer on my Oil Drain Bolt.
I have never been able to find the oil filter element! Thank you so much!
You are so welcome!
Superbly filmed, to the point, and super easy to follow, all the details and torque references clearly displayed, must have taken you an age to edit, no doubt you saved me much time, such a great video as are all in the series, actually I have a Yamaha Forte 125cc which I think has the reference SV-125 or XC125 and it’s the same engine - thanks very much.
great Job Mitch. Your videos are very professional, informative, well done and right to the point. Thanks you.
Thanks Mitch, you are such a good mechanic!
Thank you Richard :)
I never did an oil change before but thanks to this video I did my first and it was easy. Thank you for adding small details like what size socket.
I know this had been awhile since it was posted but gotta say: excellent video!!
Thank you man!
Thanks teacher! I learnt so much with this tutorial....
Love your videos Mitch! Hoping you can show how to change the cvt belt on the vino someday
Thanks Ben! Yes I have video of CVT parts! I will edit later this week 😄🤙🏼
Thank you Mitch for your videos helped me out a lot...i changed my oil using your vid rather than the manual. How come the manual makes no mention of the strainer and drain plug on the bottom of the motor? I would have never known it was there.
Not a word, images says it all! Great video, very usefull!
Thank you!
excellent job...i wondered if this scooter had an oil filter
Thanks for this. Way more involved than my fz07!
Nice job Mitch, you’re a time saver, thank you!
You're welcome! 🤙🏼🤙🏼
Thanks for doing these awesome videos. The carburetor video was a lifesaver for me. Regarding the oil change, Getting the oil filter housing off and back on was such a pain. The two 10mm bolts specifically. I used a ratchet with a 6" extension as you noted in the video and I watched you do it about 20 times over and over. It looks like you were able to get a straight shot with the extension/socket onto both bolts. I couldn't get enough of a straight shot to reinstall those two bolts. I ended up removing the plastic floor of the scooter with the battery box to try to get more open room to approach the bolts. Major pain and waste of time. I keep wondering what I'm doing different (wrong) vs what you are doing in the video. I'm sure it's user error on my part. LOL.
Thank you Mitch, now I will try it to my Doodo 125, same motor, same procedure :) Greetings from italy
These are just the best tutorials...👍
Thanks for the video.. question can I use synthetic oil?
Hi there. thanks for your video. just wondering, when you check the oil level. The bike is on the center stand, that means the bike is not straight. is that a good reading? thank you.
Super helpful video, I just changed the oil and transmission fluid yesterday. My brother just gave me his Vino 125. It only has 490 miles on it but it's been sitting for about 10 years. I've never owned a Moped before. Do you have a Brake fluid change video? Also what would you suggest I do before trying to get this thing running again? I had to spray WD-40 in the gas cap because it was stuck. I've drained the gas from the tank and there's gunk. I was planning to drain and replace the Brake fluid, and was contemplating taking out the tank and cleaner the carburetor, but wasn't sure if pouring new gas and then trying to see if I can get it started was a good idea or not :).
I purchased one similar to what you deacribed. Has 478 miles but sat for 7 years. My fuel tank was full of crud and rust, definitely pull the tank out and clean it. People have suggested to run an inline fuel filter to catch any possible remains from the tank. I’m also planning to clean the carb following mitch’s video.
That that cover for the oil element is magnetic and can trap little pieces of metal so clean it well along with the filter itself
Excellent video Mitch! I notice you use Royal Purple oil fairly often. Is this a motorcycle specific oil or just regular synthetic? Thanks!
Hey, @MitchsScooterStuff, loved the video! I live in Florida where the temps are warmer, would you recommend i use 20w-40 oil, or stick with 10w-30?
Thanks! I lived in hot Texas and currently in Hawaii, I use 10w-30 just fine 👍🏼
Hi Mitch, warm greeting from Bali 😊
Aloha 😄🙌🏼🙌🏼👍🏼
Huge help to me Mitch thank you.
Mitch you are very talented! I grew up on Outerbanks of NC Cape Hatterss in my back yard! I am old salty crusty surfer dude retired now on kidney dialysis I love riding motorcycles I rode 1992 Suzuki DR 650 from Beaufort NC to Costa Rica and back in 92. Love watching you work on scooters I am handicapped neck been broken 3x thoracic back vertebrae all broken by 16 yr old girl licensed 6 days 2014 . So now looking to sell my two bikes and get into scooters easier for me to handle! I weigh 200 5’10” I like Suzuki 650 Burgman do you think it would suit me?
Hey sorry I just saw this! 😆 Wow what a story! I'm glad you are still alive after the accident... stupid girl ugh! Burgman 650 is a sweet scooter... I suggest to find one and try get on it to see if you feel comfortable... sit on it... feel if it's too heavy or not... suit you, yeah sure... it's good bike!
@@MitchsScooterStuff Thank you I saw where surfs cooking out your way. I used to surf big waves Fiji Hatteras Australia and my cousin lives in New Zealand. I caught California break couple times it was like monster shore break no thank you! At least there you have reef break there. Be careful!
Thanks man 🙏🙏🙏really cool work !!!
Thanks Mitch. Most Excellent.
what cleaner do you use on the oil strainer and. element? carb cleaner or just a simple wipe down? thanks, great video breddah 🤙
I normally wipe them down... 🤙🏼🤙🏼
That was excellent!
Always doing a great job 👍🏼
Thank you Anthony!
Awesome dude, thanks 👍 good video
Awesome tutorial bro👍👍👍
Thank you so much 😀
Keep the vino 125 vids coning
Hey Colton, yes I have so many more vino videos coming :-D
Great video thanks!
Great vid . Thanks. That oil you put in looked dark and dirty , what was it ?
Hey Paul it's purple oil haha... this is what I use amzn.to/2JAEC51
Mitch's Scooter Stuff , nice 👍🏻. Keep up the good work.
Thanks Mitch!
You’re welcome Steve!
Great vid! Thanks!!
Ok I saw a few of your vids Jody but steal have not found none on what kind of gear oil to use in a 2004 Yamaha vino so can you tell me what kind some one said 80/90 gear oil
Thanks Mitch~ may i have the o_ ring size of oil filter cap ?
What’s the absolute best oil to use for Yamaha vino? I just got one and I wanna do exactly what you did. Brand new clean up oil job
I just don’t know what the best stuff to use
The secrete stuff
Amsoil scooter oil
Some videos on other models show the oil being drained only from the oil filter bolt. Is that acceptable? Big fan!! Thx Allan Sol Cal USA
Yes. No need to remove the side plug.
Thanks, man!
Glad to help!
hii mitch
can i use car engine oil in my scooter with dry clutch with any problem in engine?
Excellent explanation 👍👍👍👍👊👊👊👊
😎👊🏼👊🏼👊🏼
Mitch
Nail it Bro!
😄🙌🏼
Oil drain bolt 23NM-16.6ft/lb-200in/lb. Oil filter element cover bolt: 8NM-5.8ft/lb-70in/lb. Oil delivery pipe bolt: 10NM-7.2ft/lb-86in/lb. Oil strainer cover 32NM-23.1ft/lb
Thanks!
You are so welcome! Happy to help out! Have a good week 🙏🏼
Hey Mitch, do you have a link on where I can buy a new drain bolt and gasket?? Both of mine are damaged.
Love your videos btw! Always my go-to for anything with my vino!
BRAZIL WAS HERE. 🇧🇷😎
Awesome!! 😄🙌🏼
I have Yamaha vino 125 cc 2008 model but my cdi box went bad and I can’t find one in the market any suggestions 🤷🏻♂️
Love your videos and I just question the strainer how can I clean it if I don’t want to buy a new one can I rinse it with water and dried off what type of soap if so how would I do it thanks
Thanks Shaun! Yes can wash with water and dish liquid soap and dry it off before install is no problem
Use gasoline.
i can tell this was done in hawaii from the birds lol
haha :)
My Yamaha vino 50 2006 is having an issue that oil is spitting out the dipstick?is that normal?pls
good show
Thank you!
Awesome vid. 👍🏻👍🏻👍🏻
Thanks 👍
저는 볼 때마다 좋아요를 누릅니다 왜냐고요 유익한 방송 이니까요
저도 비노 125를 가지고 있는데요
정비하는데 큰 도움이 됩니다 단 한 가지 부족한게 있다면은 카브레타가 좀 다릅니다
제 오토바이는
대만 산입니다
혹시 가지고 계시면 청소하는 법 좀 올려 주세요
that was quite the journey
Thank you brother. But why is this new oil color black like old oil?
Hey it’s purple royal oil color is dark purple 😂👍🏼
@@MitchsScooterStuff yeah your right, my bad😂
How do you get the air filter out from bike ..it looks like the rear wheel is in the way..any ideas ..thanks
How often do you clean the strainer and element?
Every other oil changes
My 125cc Hyosung scooter just has has a mesh filter that comes out in one go. Why is this one so complex ? I don't have the oil filter. Is Hyosung cheap skate ?
Hmm I am not sure... never worked on Hyosung before 🤷🏼♂️🤔
Im following you on instagram now 👍🏼👍🏼😎
Very good 👏🏻👏🏻👏🏻
Thanks man!
Is ten w 30 motor oil ok in a Yamaha vino scooter 125
How many scooters do you want
Mitch: ✊👊✊👊
How many scooters do you want
Mitch: Yes.
Hahahah…. Just, YES..!👍😂
Quick question where can I buy an oil filter for this bike please could someone send me a link below or the website.
Thank you
Hi, there is no oil filter on this scooter
Filter element is what I mean where can I buy or shall I just give it an clean
Mitch don't you like motorbikes?Do you service motorbikes with geared ones?...Plz do some work in bikes too..Am waiting to see that...Plz reply....
Hey, I am not into Motorcycles at all and I'm only interested in scooters ... my friend has a 1987 Honda 750cc motorcycle he wants me to rebuild it but I have so many scooters waiting to get fixed up :)
no watching. because mitch excellent
I just finished up all of this, it's drank 2 quarts of oil and I'm not getting a reading on the sight glass. It also sounds like my engine is trying to seize when I start it.. any help??
Hmm is it on center stand on even ground surface for correct oil level reading? Check air filter to make sure oil is not in there
@@MitchsScooterStuff haven't had a chance to check much yet, I'll be heading out to work on it tonight. Some guys on a Facebook group think it's a crankcase pressure problem and probably has something to do with the emissions delete I followed from you. Probably going to throw all of that back on and hope my engine isn't messed up, it didn't sound great that's for sure..
Greetings from ❤🇹🇷❤😷👍
😎🤙🏼
Is this not supposed to take 2 stroke premixed oil?
This Vino 125 is four stroke using engine oil..... Vino 50 is two stroke...
@@MitchsScooterStuff Only old Vino 50's are 2 stroke (pre 2006). After that, they are all 4 stroke.
How can you keep you nails clean from those grease and oil? Mine are getting dirty for days later, even though I used wd40 😂
Haha yeah I use dawn liquid soap often, it clean off very well
Niec
What a huge pain to get to the oil filter. Good thing you covered it, so I know not to buy a Vino.
Yeah it sucks but not too bad just have to do every 4,000 miles... Vino 125 is one of best scooter I ever ride... it handles amazing but not impressed with motor performance since Buddy 125 can go faster!
Hello my name is Shaun I live in Canada I have an 06 Vino 34,000 km the CDI box went on it we can no longer get them in Canada Yamaha will not ship them to Canada because of our market I’m stuck with a bike now that I can’t get a CDI box i’ve tried eBay Kijiji trying to get a used one can’t find one do you know anybody that can get me a CDI box for that bike with a little bit lower mileage there’s just no way I can get the CDI box in my country I’m just frustrated with the bike Please let me know thank you Cool your videos
Hey sorry I just saw this... try Vino group on Facebook someone can help for sure! 🤞🏼
Still waiting for you to do a carburetor installing line tutorial
I got video on carburetor on Vino, will edit it soon
Appreciate that fam
Why is the new oil dark?
Костя Никульников I used purple royal oil that is dark purple 😂😂
@@MitchsScooterStuff thanks, I was in a slight delusion
HOW DO I GET THE CARB OFF
Here's video I posted... th-cam.com/video/k7T_vM9LHs8/w-d-xo.html
I can't find none of u change your gear oil on vino scooter man
Where you live Mitch's so people can drop their scooter for you to fix it
الله يرحمه برحمته الواسعة وأسكنه فسيح
هوه منو
الله يرحمه برحمته ٣
engine sounds bad..check the valve clearances or the timing chain for slack....
Salut messieurs stp je me nome bakayoko je cherche habillage de ma moto yamaha forte 125
Mitch I wish you would start talking in your videos again, silence is so distracting.
Which video did I have talk part? I can't think of one... all how to videos I just do like this... 🤷🏼♂️
Dude, seriously, you replace the oring AND the copper washers each time, the washers are a CRUSH item , one time use! As is the drain plug washer, REPLACE ! As always replace the ORING. Smh..
Dude, i've been using the same o ring for 14 years. No leaks.