Goooood Morning Folks! It´s 6 o clock and I´ma hoppin on my Yamaha scooter to ride around town to find me some breakfast at a nice bakery ... Then I´ll make some coffee & watch this. Yeah ! ;-)
Mic, what are you doing to the stator & why? Does the rewire increase output? Why not simply install the new rectifier/regulator? I want to do ac-dc conv to supply Ruckus headlight & add SD headlight modulator for safety.
Tips for soldering: Heat up the WIRE with the soldering iron and dipp the solder directly on the wire. When the wire is hot enough, the solder will melt and wet the wire easily.
Love your tutorial. Just bought one for my project but don't have the carburetor I checked online been being discontinued. Too have idea where I can find a used one
@MitchScooterStuff. My Vino 125 CDI is not working (starter works - engine cranks but does not fire). I say that b/c there is no spark coming from the spark plug. I suspect its the CDI is gone bad. And Yamaha is not selling new CDI's anymore. I change the Vino from AC to DC. does the CDI still come into play? or Do I need to figure out why the CDI went bad and replace it before I made this AC to DC mod? BTW thanks for a great video.. great stuff.
Awesome video…..as always! My stator died on my 2006 vino 125 and an assembly replacement is no where to be found. Do you know of an aftermarket part that would work? HELP!!!
Thank you Jason! Man, I wish I knew... if I know where to get a good aftermarket, I will post about it... how exactly your stator died? wondering if can repair it
Hi Mitch, great video. i learned a lot and i changed my YAMAHA - VINO 50 s' wiring according to your information. Just one question, if we changed stator wiring like this, what about AUTO CHOKE and CDI ? Isn't that voltage too much for the AUTO CHOKE coil?
Thank you Tommy! Life in Hawaii is great, yes match better for my lifestyle where I want warm all year round and more water activities right by where I live... but we still love Texas and miss it...
Hi Mitch! I’ve been using your videos a great deal. Thank you. I think this is my next thing. I’ve been working on an LED headlight swap and apparently I need dc at the headlight? Did you have any lingering issues or negative outcomes after this?
bruh, did you see that cane spider hiding in your stator winding? meaness lol Can I ask if I swap out my stock headlight bulb for a Cobb led replacement and don't mind the flickering, ya think my bulb'll burn out prematurely without a rectifier? Fyi just R&R'd my stock rear shock with a fleabay RFY 12.5" clevis end adj. nitrogen gas reservoir unit for 55 clams shipped. No more springy rear. Installed rubber tubing on the long rear exhaust bolts' shafts 2 stop vibration. Also thx 2 U removed emissions, fixed my fuel guage, inspected CVT then upgraded rollers. Mahalo and pls keep up the chill and wicked cool vids!
Haha yeah I took the spider out and put on the tree :) yes LED will blown out soon after you install 😢 Wow very cool, I should check it out.... what is fleabay?
Hi Mitch, great video congratulations! I wanted to ask you, do you think it is possible to carry out this type of transaction even on a 50cc two-stroke scooter? I have a '99 Yamaha Bw's, and I will also have to mount some led lamps both on the front headlights and on the rear stop...thanks for the answer 😉😉
That's a top-notch work, Mitch. Just one question, if logic serves me right, with proper know-how and a wiring diagram, I can do this to literally any bike with an AC system, right?
Thank you Richard! Yes possible, if other bike’s stator setup look alike in this video , you can follow the steps to get job done. I did other two bikes like this and they works 😄👍🏼
Hey I have a I believe is a 1987 honda aero nb50 does anyone know if they have to have or need a title if so how would I get one if it was a non running scooter thanks
Goooood Morning Folks! It´s 6 o clock and I´ma hoppin on my Yamaha scooter to ride around town to find me some breakfast at a nice bakery ... Then I´ll make some coffee & watch this. Yeah ! ;-)
How was breakfast? Greetings from Perth Western Australia.
Nice that sounds awesome 😄👍🏼🛵💨
hell yeah!
Love your presentation and the quietness of your videos. You don't need words to teach by example. Great work
Thank you Andrew!
Mic, what are you doing to the stator & why? Does the rewire increase output? Why not simply install the new rectifier/regulator? I want to do ac-dc conv to supply Ruckus headlight & add SD headlight modulator for safety.
Great video! Why can't you just use DC from the battery? You are getting the AC from the alternator? 💭
Thanks! If you do that then you will kill your battery 😆 this is way I modified the stator to have floating ground... this is proper way to convert
Tips for soldering: Heat up the WIRE with the soldering iron and dipp the solder directly on the wire. When the wire is hot enough, the solder will melt and wet the wire easily.
Love your tutorial. Just bought one for my project but don't have the carburetor I checked online been being discontinued. Too have idea where I can find a used one
Perfect job.👍👏👏👏
Mahalo!
Thanks 😊 Mitch.
U are so good every thing 💕
Thank you! 😃
Does this affect the kickstart when battery is dead? And what kind of voltage reading are you getting?
@MitchScooterStuff. My Vino 125 CDI is not working (starter works - engine cranks but does not fire). I say that b/c there is no spark coming from the spark plug. I suspect its the CDI is gone bad. And Yamaha is not selling new CDI's anymore.
I change the Vino from AC to DC. does the CDI still come into play? or Do I need to figure out why the CDI went bad and replace it before I made this AC to DC mod?
BTW thanks for a great video.. great stuff.
How can I find those blue wires on my Honda spree 1986 thanks great video
Can I do this to any ac stator cuz mine already DC
Opa, Mitch. muito bom. Gosto do teu trabalho ☺️
Can you please do a brake light brake sensor fix please
Awesome video…..as always!
My stator died on my 2006 vino 125 and an assembly replacement is no where to be found. Do you know of an aftermarket part that would work? HELP!!!
Thank you Jason!
Man, I wish I knew... if I know where to get a good aftermarket, I will post about it... how exactly your stator died? wondering if can repair it
Hi Mitch, great video. i learned a lot and i changed my YAMAHA - VINO 50 s' wiring according to your information. Just one question, if we changed stator wiring like this, what about AUTO CHOKE and CDI ? Isn't that voltage too much for the AUTO CHOKE coil?
The CDI and auto choke are on a DC circuit. They will work fine :)
We appreciate you very much Mitch. How is life in Hawaii ? (Kihei?) Does it match your life better than Texas?
Thank you Tommy! Life in Hawaii is great, yes match better for my lifestyle where I want warm all year round and more water activities right by where I live... but we still love Texas and miss it...
Bravo!
whats the charging voltage on the starter before modding it to dc im not sure what it is so i dont want to waste my time making it dc if its shot
Hi Mitch!
I’ve been using your videos a great deal. Thank you. I think this is my next thing. I’ve been working on an LED headlight swap and apparently I need dc at the headlight?
Did you have any lingering issues or negative outcomes after this?
You're welcome Daniel! Yes DC and LED headlight bulb work together. So far no issues, it works awesome!!
I run a cycleops LED headlight, but had to get the converter with it.
What converter did you use? Can you link it?
bruh, did you see that cane spider hiding in your stator winding?
meaness lol
Can I ask if I swap out my stock headlight bulb for a Cobb led replacement and don't mind the flickering, ya think my bulb'll burn out prematurely without a rectifier?
Fyi just R&R'd my stock rear shock with a fleabay RFY 12.5" clevis end adj. nitrogen gas reservoir unit for 55 clams shipped. No more springy rear.
Installed rubber tubing on the long rear exhaust bolts' shafts 2 stop vibration.
Also thx 2 U removed emissions, fixed my fuel guage, inspected CVT then upgraded rollers.
Mahalo and pls keep up the chill and wicked cool vids!
Haha yeah I took the spider out and put on the tree :) yes LED will blown out soon after you install 😢 Wow very cool, I should check it out.... what is fleabay?
@@MitchsScooterStuff ebay lol
Hi Mitch, great video congratulations! I wanted to ask you, do you think it is possible to carry out this type of transaction even on a 50cc two-stroke scooter? I have a '99 Yamaha Bw's, and I will also have to mount some led lamps both on the front headlights and on the rear stop...thanks for the answer 😉😉
Thank you! Yes you can do that... I did to my Honda Elite 50cc two stroke it works amazing!! Same method!
Hey what cables I use on the Honda elite thanks
Hey Mitch can’t I just swap the stock headlight bulb for an LED bulb without having to do this? Thanks
If your bike is running on AC then no... HID light will flick like crazy and AC can kill HID bulb soon after you install :(
@@MitchsScooterStuff thanks for the reply! Love your videos man 🤙🏼🏝☀️🏄♂️
Have you tried the direct pull after market carburetor?
Not yet... I stick with OEM, but polini carburetor is great for two stroke engine
That's a top-notch work, Mitch. Just one question, if logic serves me right, with proper know-how and a wiring diagram, I can do this to literally any bike with an AC system, right?
Thank you Richard! Yes possible, if other bike’s stator setup look alike in this video , you can follow the steps to get job done. I did other two bikes like this and they works 😄👍🏼
What scooter lift are you using?
Just asked my friend who I bought it from .. he said harbor freight ... I have it for many years it’s awesome 😁
Hey I have a I believe is a 1987 honda aero nb50 does anyone know if they have to have or need a title if so how would I get one if it was a non running scooter
thanks
You can go online and type "apply for registration Vermont DMV"
انت جيد
The screw heads are probably JIS Japanese Industry Standard rather than Philips
My scooter has AC/DC Ignition system. after 7 years i have no clue about this.
👍👍👍👊👊👊
👊🏼👊🏼
This is a stupid mod. Just add a full wave rectifier.
Please be nice. I want to show people that this can be done. Thanks!