Just purchased the red Boomba Racing BOV for my 2015 Veloster, along with a new K&N Typhoon CAI... I'm eagerly awaiting its arrival to get it on my vehicle. Straight forward, and well done video! Looking forward to this product.
I bought your excellent products when I had my fiesta , so glad to see you have products for my new car , can’t wait to reveal it on my channel. Definitely going to be showcasing your stuff
@@chasepineda2585 oh yeah, very easy to install. Also sounds great, holds boost really well without issue. The stock recirculation valve used to sound like it was leaking with my KN cold air intake. Also I like the boomba’s partial ventilation when not letting fully off the throttle.
I have a question I put a blow off valve on my 2016 Veloster turbo and after driving it the engine light came on I didn’t order it from u guy’s or that company but idk what’s wrong maybe I put something on wrong there was 4 of us kinda doing it so we thought it looked good and sounded good
@@edwinayala3490 I'm not familiar no. But watch that video I mentioned and if your bov is similar, and has a piston like the one In the video, make sure you use the proper grease and the right amount Too much grease is not good either
Since this a full vent to atmosphere, the return line is no longer utilized. It would still need to be blocked off to prevent debris and moisture from getting in.
Hi! Our product does not affect your stock A/F ratio and should not cause any negative effects during its use. Please let us know if you have any more questions or need any more help!
@@603adventures9 did a dealership mechanic say that it made your check engine light come on? The Veloster Turbo is MAP tuned and not MAF tuned from the factory, so our BOV will not cause a check engine light to come on. We make BPVs for vehicles that are MAF tuned as we know a BOV (which is vent to atmosphere) will cause the check engine light to come on
Hi! No tune is required for this product and will not change the operation of your vehicle at all! It is there to help higher boost pressures and add noise but will not change the functionality of your vehicle. Hope this helps!
Really good to know, that I won’t have to remove the bumper fully to install this in the future. I’m tired of dealing with the retainer clips
Just purchased the red Boomba Racing BOV for my 2015 Veloster, along with a new K&N Typhoon CAI...
I'm eagerly awaiting its arrival to get it on my vehicle.
Straight forward, and well done video!
Looking forward to this product.
It's going to sound awesome all-in combination! Thanks for your support!
Just got mine and gonna install tomorrow. I can't wait. 🔥🔥
Thanks for your support! Enjoy!!
well I'm sold. Time to buy one
I bought your excellent products when I had my fiesta , so glad to see you have products for my new car , can’t wait to reveal it on my channel. Definitely going to be showcasing your stuff
Thank you for the support!!
This video is the reason I’m bout to purchase this one, the direct fitment was very well demonstrated.
Do you like it?
@@chasepineda2585 oh yeah, very easy to install. Also sounds great, holds boost really well without issue. The stock recirculation valve used to sound like it was leaking with my KN cold air intake. Also I like the boomba’s partial ventilation when not letting fully off the throttle.
@@isaacsellers700able that’s awesome! What do you mean by the ventilation? And chasesdomain on Instagram if you could message me
Go to Lowes or Home Depot and get the rubber covers for chair feet and clamp it on. Looks much better by eliminating the hose.
How do I do this without a code being thrown? I tried this and it worked but I got a check engine light a few days after putting it on.
Mine didnt threw a code at all @autumnyoung3677
wow extremely simple, great video
Installation of the BOV itself was just fine but holy fuck I hope I never have to get behind the bumper again. Pain in the ass
Is there a way to only disconnect the driver side bumper and the middle? Or all sides must be leaned back
I have a question I put a blow off valve on my 2016 Veloster turbo and after driving it the engine light came on I didn’t order it from u guy’s or that company but idk what’s wrong maybe I put something on wrong there was 4 of us kinda doing it so we thought it looked good and sounded good
I have a boomba bov but its sticking open, just install a few months ago.. any idea why?
Did you ever find out what was wrong im having the same issue right now?
@@edwinayala3490 on youtube search for "boomba bov cleaning" and watching the video of the 2016 civic bov cleaning. Same procedure
@@edwinayala3490 it needs to be taken apart, cleaned and regreased
I have a turbo xs one, idk if your familiar , i did regrease and used gun oil on o- rings but same problem
@@edwinayala3490 I'm not familiar no. But watch that video I mentioned and if your bov is similar, and has a piston like the one In the video, make sure you use the proper grease and the right amount
Too much grease is not good either
Do you need a tune after getting this product?
Hello! This part does not require a tune to run because the vehicle is MAP controlled. Hope this helps!
Can keep the return hose stock and only replace the BOV without any issues?
Since this a full vent to atmosphere, the return line is no longer utilized. It would still need to be blocked off to prevent debris and moisture from getting in.
@@BoombaRacing okay thank you
I didnt get a cap in my package.... what am i supposed to to to block it
@boomba racing
@@BoombaRacing What happens if my aftermarket intake doesnt have that hose? Just get rid of it then right? lol
Great instructional video. Thanks
Awesome video thank you . I do have a dumb question though did you say you removed the plate that the old diverter valve is sitting on
The OEM plate does get removed so our taller sitting BOV can fit properly.
@Boomba Racing I’m considering buying the product does it lower the reliability or the functionality of the car at all ?
Hi! Our product does not affect your stock A/F ratio and should not cause any negative effects during its use. Please let us know if you have any more questions or need any more help!
@@BoombaRacing makes check engine light on
@@603adventures9 did a dealership mechanic say that it made your check engine light come on?
The Veloster Turbo is MAP tuned and not MAF tuned from the factory, so our BOV will not cause a check engine light to come on.
We make BPVs for vehicles that are MAF tuned as we know a BOV (which is vent to atmosphere) will cause the check engine light to come on
I am highly considering this.
Mine did not ckme with the cap for the intake hose. What can i do @boomba racing
Oh no! Slide into our Facebook DMs or email info@boombaracing.com! We'll take care of ya!
Looks about the same for my Forte5 SX!
Hello! This is actually the part that should fit your Forte5 SX: www.boombaracing.com/hyundai-kia-v1-blow-off-valve/ Hope this helps!
@@BoombaRacingdoesn’t fit my year, that’s for the newer Forte GT, mine is a 2016 SX manual, so this veloster BOV should fit perfectly
@@joelagrinsoni4016 My apologies, you are correct actually, this is the correct part! www.boombaracing.com/veloster-turbo-bov/
Do you ship to Canada and Quebec?
yes we absolutely do!
Do you sell rebulild kit for these ? Mine use new o rings thanks @@BoombaRacing
@@603adventures9 Hello! You can send us an email to info@boombaracing.com and let us know you need a ORing rebuild kit!
no tuning?
Hi! No tune is required for this product and will not change the operation of your vehicle at all! It is there to help higher boost pressures and add noise but will not change the functionality of your vehicle. Hope this helps!
good video
well said
i agree
thanks guys
im lonely ;(
@@jeffgoddard4100 Us too... it's okay.
Mines a lot louder and my bov location is directly under the intake filter lol