Interesting and competent set up, good idea to have the alternator high up, no chance of it being flooded, and use the vertical leg as a oil sump for the chain drive, the power cables seemed rather tight. Thank you for posting this 👍
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it. techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
That's great to see all the parts working together but I would suggest you to encapsulate the entire component to prevent it from corrosion in this moist environment
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it. techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
@@Rony098963 that is s not applicable to a domestic water turbine. ESD is a problem in industrial processes such as refineries where intrinsic safety is required for combustible liquids and powders
I love your concept. I too want to build something as useful as your power plant. Somehow no idea has clicked in my head as yet. Once again, a very good concept.
Any information on the output? I’ve done the math on a small stream like that and it wasn’t much. Less than a hundred watts and the drive eats a few percent as well.
How many amps are you drawing off that? You could probably increase the current with a slightly different shaped bucket, able to hold more water, and add a few more gears to get the alternator spinning faster. Seems like a pretty steady flow of water
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it. techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it. techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
So, how are you powering the exciter circuit to turn the alternator on so it will produce voltage? Or, is it a generator and not an alternator as a generator needs no coil excitation to produce voltage. Also, it seems like your rpms are to low to get much out of either device.
I would agree it's "bush engineering" since its not the most efficent way he could have utilized the available power. He could have made a gravitational vortex for more efficiency
Nice work! Got all mmy patts together to build one very similar this spring. Mines gonna have to be a floater though because its a trout stream and i can alter it enough to focus the water like your. Smooth steady power! Thats cool.
@@smallcityhomesteaders1600 all good! I have big thumbs too, and this happens all the time for me. Like as I am typing this comment, autocorrect and me trying to make sure there isn't any errors lol
Gdyby ta końcówka była trójkątna, albo lejkowata można osiągnąć większą prędkość strumienia wody tak jak to widać po krzywiźnie tafli wody, ale widać ktoś skopiował zamiast zrobić samemu, ale widać kreatywność.
Having the water spill over the top of the wheel and down the front takes more advantage of the potential energy. This is only getting around 30% of what that wheel could make the other way. Also the spur gears on the alternator are begging for a chain drive.
Actually the gadyet or material is alterneator 24volts out put inverter 220volts 60,000 wateage2 Simorsibolepump And watermill and minieswimingpuol or aquarium for hausgenereator
Interesting and competent set up, good idea to have the alternator high up, no chance of it being flooded, and use the vertical leg as a oil sump for the chain drive, the power cables seemed rather tight. Thank you for posting this 👍
Thank you ❤️
Fact: car alternators are tend to generate electricity so its not hard to use them as hydro electric generator
Youre lucky, your home enviroment support this
Yes use that for power saving. Thanks very much❤️
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it.
techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
This is very cool.
Thank You !
That's great to see all the parts working together but I would suggest you to encapsulate the entire component to prevent it from corrosion in this moist environment
thanks for sharing, amazing idea...very interesting 👍
Wow kreatif banget
A good way to maximize efficiency without needing precision components. Nice job
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it.
techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
@@Rony098963 that is s not applicable to a domestic water turbine. ESD is a problem in industrial processes such as refineries where intrinsic safety is required for combustible liquids and powders
Thanks
I love your concept. I too want to build something as useful as your power plant. Somehow no idea has clicked in my head as yet. Once again, a very good concept.
You can do it! Thank You !
thanks for sharing this. Awesome for rural power generation projects. ❤️
Thanks for watching!
Working on a mini project. Will upload when done!
❤❤
Adoro ver essas coisas se eu pudesse morar na chácara iria
Any information on the output? I’ve done the math on a small stream like that and it wasn’t much. Less than a hundred watts and the drive eats a few percent as well.
90-100 V with low Amp
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
This is actually called GO MBC- Go Make, Break & Create. Awesome.
Thank you !
That's Just plum Awesomeness 👍🏻
Thank You !
Perfeito , parabens! Energia livre. Free energy.👍👍
How many amps are you drawing off that? You could probably increase the current with a slightly different shaped bucket, able to hold more water, and add a few more gears to get the alternator spinning faster. Seems like a pretty steady flow of water
AC 100 - 110 V
@@restoringmaking amps?
Thanks for sharing. Got the idea of securing the chain in any possibility without hassle.
Thank you ❤️
Nifty setup... My question is....
Is it actually carrying a load and if so how much???
Wow great idea my friend
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it.
techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
Thank you very much
Good.
E Polytechnic. A technical channel.
Really awesome👍👍
Parabéns muitos sucessos sou mais um inscrito estamos juntos cheguei no like
Now that's cool ! A little oil would help.
A common ignition source within Industrial or Manufacturing Industries or Petrochemical, sparks resulting from Static Charge buildup and sudden discharge of it.
techproces.com/static-charge-is-dangerous-in-industrial-or-manufacturing-industries/
Yes it will you right. Thanks
i love that gearbox
Good, cery good,thank you.
Very good hum ko iski adhikaar keliye ledna hoga
Good idea
Like the flex plate for gear!!!!
E quando chove forte será que isso aguenta a correnteza?
Very interesting project
Glad you think so!
Great idea.❤❤❤
Thank you! 😊
Ide mantap
So, how are you powering the exciter circuit to turn the alternator on so it will produce voltage? Or, is it a generator and not an alternator as a generator needs no coil excitation to produce voltage. Also, it seems like your rpms are to low to get much out of either device.
I bet it was converted to a permanent magnet rotor, common with making generators for these applications.
Yes rpm too low. that's why i changes the coil packs.
Nice! Could you please post a video on how you excite the generator and how you use the power it generates?
Yes I will. Already have a post. I will publish a video
Keren banget
Good idea....how about when the water level rises or flood came? Is it easy to disassemble?
no it's not coming for over. chain from the turbine to upper wheels have covered and also have water seals for bearing
العرب السوريين هم أول من بنى السانية لرفع المياه لأعلى .
شكرا
Amazing👌
Thank you!!!
@@restoringmaking Welcome :)
Nice one. Can i use the alternator from my 2.2KVA diesel generator?
Try it i think it will be possible
Звук водопада просто убит этой железякой!
Good miniature
Hello po ano pong magandang dynamo gagamitin. Pahingi po nang schematic .tas ano mga materyales master salamat sana po matulungan no ako
I like this.
Thank you !!!
This is awesome. ..I once had this idea. .
Thank you! Cheers!
when you converted to 220 AC how many watts its produced? 200 to 300watts or less?
May be 10 watts
Yes good....
Nice
So clever
Thank You !
That’s an impressive piece of bush engineering.
I would agree it's "bush engineering" since its not the most efficent way he could have utilized the available power. He could have made a gravitational vortex for more efficiency
Thank you all ❤️
Good 👍
Thanks
Ilike, subbed, keep up the awesome work!!!
Thanks for the sub!
Can u pls. Share with us the wiring diagram from alternator to outlet sir?
Love it im def gonna get one set up
Thank You Soo Much !
New subscriber
Thank You Soo Much !
Nice work! Got all mmy patts together to build one very similar this spring. Mines gonna have to be a floater though because its a trout stream and i can alter it enough to focus the water like your. Smooth steady power! Thats cool.
You need patents to make a water wheel? That's pretty interesting lol
@@davidtheawesomeone5358 parts*.... big thumbs, sorry
@@smallcityhomesteaders1600 all good! I have big thumbs too, and this happens all the time for me. Like as I am typing this comment, autocorrect and me trying to make sure there isn't any errors lol
Sounds great! thank you
berapa watt daya yang dihasilkan teman?
so nice bro
Thank you so much
Good
Thank You Soo Much !
Wooooowwwwww...ur best bro.
Thank you so much
The wire needs to be protected in some metal flex, liquid tight, gray pvc, or emt with compression fittings.
Thanks bro. i'll do it
@@restoringmaking i only say this as advice, I am an electrician
Amazing!
Thank you
Love the setup! Any idea what the total gear ratio is?
i think 1:more than 40
Nice vid
Great Idea! How much wats is generated?
90 - 110 Ac voltage with low Amp
Interesting 👏
Thanks for watching
Cool idea
Thanks!
Muito bem feito, muito criativo. Mais uma pergunta, e quando liga a carga? A rotação não diminui?
Nice bro
Thanks
clean setup!
Thanks!
Gdyby ta końcówka była trójkątna, albo lejkowata można osiągnąć większą prędkość strumienia wody tak jak to widać po krzywiźnie tafli wody, ale widać ktoś skopiował zamiast zrobić samemu, ale widać kreatywność.
How manys rpm does the alternator will produce electricity?did you do something inside the alternator?
yes change the coil pack for A/C output
@@restoringmaking do you have videos? I will try to make one..........
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
Very nice
Thanks
you are genius im shaport from nepal
Thank you ❤️
How long dose one of these last
good good
Thanks
The model is OK but by looking at the speed of the alternator rotating, I dought it is able to generate any desirable power.
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
Saludos de JOACIN MONTOYA, inventor de escritura global... Dónde se puede hablar sin abrir la boca...
Eu vi um moinho lindo nos Estados Unidos sei algumas sugestões ele ficava em um parque que tinha um trem
Can you tell us the amperage this produces at what voltage please?
90-100 V A/C with low Amp (1-2)
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
Thanks for sharing godless you always idol stay safe nailabada na kita lods paki sampay nalang idol godbless
I feel like this could be more efficient
Having the water spill over the top of the wheel and down the front takes more advantage of the potential energy. This is only getting around 30% of what that wheel could make the other way. Also the spur gears on the alternator are begging for a chain drive.
@@michaeldanielallen ah yes!
I realize there isn't much water pressure there, but I wonder if it would turn faster if it were lubricated and whatever it scraping was adjusted...
Thanks You!
👍👍👍👍👍❤❤❤❤❤
A roda d'água tem que ficar o mais baixo possível da tomada d'água da barragem, essa é uma má instalação.
Wow. You can run 2 light bulbs.
yes can run led bulbs
Amazing..what’s the output?
Thank you ❤️. Using for the lights in the house.
Ok
What size alternator in amps are you using?
Improvements can be made for better power
Thank You!
Belts would have been preferable over chain. What does it power? Charging batteries, how many and then what, an inverter?
A/C output. previously used inverter but it's power losing
How much power are you making ?
AC voltage varying 110 - 100
Actually the gadyet or material is alterneator 24volts out put inverter 220volts 60,000 wateage2 Simorsibolepump And watermill and minieswimingpuol or aquarium for hausgenereator
Why not use drive belts with tensioner, as opposed to chains?
what kind of power does this put out?
A/C voltage around 90-100
@@restoringmaking - what do you run off of it? do you have any measurement of amps or watts that it powers? really cool
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
Can anyone tell what's the power output is ?
Wow
Thank You!
This is my thiscovery in 2016
Nice..what's ya out put
98-100 V A/C with low Amp
th-cam.com/channels/MXjeahXa2rfOUk97SK5evw.htmlcommunity
Nice way to generate 20 W
thats a 120amp alternator on there and puts out over a 1000 watts.....
Try it. you have to change the gear ration and coil pack.
Boa tarde em você ganha dinheiro com esse projetos?
👍👍
For The Love Of God Grease This Thing! Other than that Good job :)
Thank You