How to fool the Epson EMP X3 projector to install LED light (part 1)
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- Found this projector free of cost without a lamp so I going to install LED light source instead of buying an expensive lamp. But before that we need to fool the projector by sending fake signal to the motherboard to keep it turn on without light source.
Are there certain values I can look for with a multimeter to find what conductors to short together?
I have a epson emp 53 model projector This hack work for me 😎👍 thank you so much
wow it worked man😱😱.it worked for acer pd116pd.thank you diy geek😍😍😍
Epson PowerLite 7600p, LCD strip holder piece (shape like a thin plastic locking piece) have broken and misled anywhere by me. What is best solution as diy.
Sir I also have this model project with lamp failure. So I want materials req. And wiring connection with diagram
Great work. Will it work for Acer X125H( Model DNX 1522). My lamp hours is ending shortly..
how to fool NEC LT 260kp ? (white - yellow - yellow - yellow) what is right pair of signal cables ?
i byepassed the optocoupler (by cutting the 2wires and shorted them together) and projector went ""ON"". (infocus IN102, the power board looks exactly as yours !) But few minutes later it went off (indicating """NO LAMP"""). i didnot try with led lamp can u mail me what to do
Did you make it, or did you give up?
I think you are a great man in history who said to me a good decision. Therefore, i have eLUX EX2010 (three lcd projector), lamp high voltage are not making by board due to hidden fault. Can i adopt your keen method? i.e shown in your video.
Is it the same for NEC ? Logic board looks the same.
Hello sir
I have Panasonic projector pt-ar100 i tray it but it is not working please help
Where are you located, i want convert my epson 3D projector to led .
Is it same with Panasonic PT-lc 76e
I've did this an it doesn't work can you help me find out wich wires I need to short please my projector is a Epson EX5210 please and thank you
Hello sir
I have a Panasonic pt-ar100 projector
I want to lamp bypass
I tray it but not successfully
Please help me
how to deactivate hv power supply?can do that? thnx
Thank you! i will try it with my x2 epson. Greetings from Argentina!
Y como te fue?
bonjour j'ai essaye avec ma IKEI model lc-xb28 les lampes ne se vendent plus aidez moi SVP.merci
thanx brother.. i was searching for this
how can i unlock operation of Epson LCD projector model EMP-X3? please help
sir mera projector benq mp515 hai lamp error aarahi hai iska solution kese kare
I buy a new bulb lamp but red led blinkink and lamp dont turner on,can you help me? thanks
Reset lamp hours. Also there is a thermal cut off switch inside which has to be reseted aswell
Sir are you still active on TH-cam? I have some questions if you are willing to help
Very nice 👍
need support regarding led conversion
Bro i have nec m230x i tried its not working it shows red light status help me with it
You are genius
Pls.tell me how to bypass lamp optocoupler sharp xr 30s
How much voltage give for projector lamp
Can I give directly 230 voltage
Please reply Sir
it works for epson emp-s3 too
tengo un dilema con mi proyector epson s12+, ya la vida util de la lampara culmino y me gustaria ponerle una lampara led, he visto muchos foros y videos donde hablan de los famosos optoacopladores y el corto circuito entre en cable rojo y marron, pero e mi caso no funciona. llevo dias tratando de engañar la board y no he podido. me seria muy util su ayuda por favor. gracias
I UNDERSTAND YOU'RE TRYING TO HELP BUT YOU CUT OFF A LOT OF STUFF.
nice video. Please make a same video of ELUX 2010 3LED and thanks.
thank you this help me sort out mine. been looking for good video How are u powering the led inverter internal or external source?
i used led driver. see my this video....th-cam.com/video/FkFdFpXU7RQ/w-d-xo.html
Hello I have a problem in my epson projector
i have prob with epson eb-s is not working and just power lamp is turn orang color
hello sir kya ap mere projector ka lamp change karne mea mer help karge pls apke jo bhi charges hai wo mea pay kar duga ( pls help me )
ca ne marche pas avec ma ikei lc-xb28 merci
good job sir jee you can help me meray pass bhi sanyo z1 projector hay may kisay lamp ko bypass krn help me
i will try my best. please send me the Clear Image of Motherboard...:)
Very cool!!
It works!
Hola!
Entonces es puenteando esos dos pines y poniendole cualquier lampara? Contame tu experiencia si no es molestia.
How to contact you
My projector not working
Bhai holozon laga le kuch dikh nahi rha hai
Thanks
I found led for 10 with 100 bucks .
Use tripod for Camera
Part 2
nice , i have the proyector
Ay que quitar la fuente
@Arnaldo Echenique lograste hacerlo ? o ya no intentaste mas?
@Arnaldo Echenique yo identifique los cables correctamente en el diagrama del optoacoplador, pero al cerrar el circuito me arroja error de sensores, debe hacer falta algo o la señal es en pulsos y por esto no se logra bloquear ... yo tengo un epson powerlite x14
Hola amigo que led recomienda?