Привет друг, если я правильно понял, ты спрашиваешь про болт? С длинным стержнем было легче иметь больше рычагов, и он легко ослаблялся. Если вы спрашиваете об обрезке болта для использования в качестве прокладки, то его тоже легко снять с помощью отрезного круга на шлифовальном станке. Не правильно выбирайте инструменты и работа упрощается. Надеюсь, поможет. Если у вас есть другие вопросы, дайте мне знать.
You are very welcome bud. Unfortunately both the shocks bolts were seized due to rust and couldn't take them off. That was the only way I could think of to remove the old and install the new ones. Thanks for watching 👍
@@gasNgears I need to replace my front bottom bushings on the shocks. its squeaking and the rubber is cracking. any suggestions for replacement bushings? Thanks!
If you are talking about the rubber bushing for the bottom shock mount then I think that metal tube (bolt housing) should slide out and then the old bushing can be pushed/pressed out and new one installed in. I haven't taken it out as I replaced my 20 years old shock completely so just taking a guess here bud.
Thanx
Привет ! Прошу сообщить, сколько раз обломало нижний болт ? Работу такую не одобряю.
Привет друг, если я правильно понял, ты спрашиваешь про болт? С длинным стержнем было легче иметь больше рычагов, и он легко ослаблялся. Если вы спрашиваете об обрезке болта для использования в качестве прокладки, то его тоже легко снять с помощью отрезного круга на шлифовальном станке. Не правильно выбирайте инструменты и работа упрощается. Надеюсь, поможет. Если у вас есть другие вопросы, дайте мне знать.
Monroe had sent me those cone washer since it was not included with the shock. But this was 10 years ago so maybe they don’t do that anymore?
They do he mentioned it in the video that he forgot it in the box
you should have pushed the center piece out of the old one and used it on the new one, instead of cutting it. Thanks for the video!
You are very welcome bud. Unfortunately both the shocks bolts were seized due to rust and couldn't take them off. That was the only way I could think of to remove the old and install the new ones. Thanks for watching 👍
@@gasNgears I need to replace my front bottom bushings on the shocks. its squeaking and the rubber is cracking. any suggestions for replacement bushings? Thanks!
If you are talking about the rubber bushing for the bottom shock mount then I think that metal tube (bolt housing) should slide out and then the old bushing can be pushed/pressed out and new one installed in. I haven't taken it out as I replaced my 20 years old shock completely so just taking a guess here bud.
Can recommend an online store link to get the required part replacement?
Hey bud, I order a lot of my stuff from rockauto.com and Amazon.com
What is recommended brand / part number and supplier to buy a replacement for the shock absorber for this car ml350 w163 2004. 350.?
did you find another good brand?