Glad to be of some use, hope your idea works better than mine did. If u are more successful could u please do a video and send me a link 😃👍 I would love to see your result
@@manstufftvOriginal I found my stove in another video. It was just hard to fill. It'll be a while before I can access my camp stuff, since it's stored & its winter in nw wisc. I will send info/video once I make one.
just 2 ideas. drill holes first then you wont get over pressuration when soldering and a super cool idea-split a length of pipe lengthwise and solder it below the pipe-its now your primet trough
@@manstufftvOriginal thats cool mate. i might make one today but i was thinking r&s model tubing because uts thinner. i would probably flaten the tube to an oval as well and use a larger diameter so the reserve us larger. ive made a penny stive with 35ml capacity and it burnt fir 54 mins with 4 holes but 4 holes is not enough heat for a boil. just for fun check out TEKTOBA,no audio but the video is the tutorial. his stuff is amazing and nearly all from ali cans. not my style but his workmanship is amazing. i actually use mine all the time as a 500ml gass canister is $15 here
Gas is a mixture of butane and propane commonly knows as map gas and the solder is lead free plumbers solder oh and the flux is standard plumbers flux. Thanks for watching and commenting 😃👍
You two seem to know an awful lot about hair dye kits ... Nice ,handy, little stove idea , Ant ... But totally suspect on those 'raven' locks now pal .
I recently made one with a desperate folding stand. Double off center row of holes. Thanks for the better idea of a filling one.
Glad to be of some use, hope your idea works better than mine did.
If u are more successful could u please do a video and send me a link 😃👍
I would love to see your result
@@manstufftvOriginal I found my stove in another video. It was just hard to fill. It'll be a while before I can access my camp stuff, since it's stored & its winter in nw wisc. I will send info/video once I make one.
just 2 ideas.
drill holes first then you wont get over pressuration when soldering and a super cool idea-split a length of pipe lengthwise and solder it below the pipe-its now your primet trough
I had all the same ideas 😉👍 but not had chance to try them out yet.
Thanks for the input and comment, thanks for watching 😃👍
@@manstufftvOriginal thats cool mate.
i might make one today but i was thinking r&s model tubing because uts thinner.
i would probably flaten the tube to an oval as well and use a larger diameter so the reserve us larger.
ive made a penny stive with 35ml capacity and it burnt fir 54 mins with 4 holes but 4 holes is not enough heat for a boil.
just for fun check out TEKTOBA,no audio but the video is the tutorial.
his stuff is amazing and nearly all from ali cans.
not my style but his workmanship is amazing.
i actually use mine all the time as a 500ml gass canister is $15 here
Be good to see a video of your creation,😃👍
@@manstufftvOriginal ill see.
usually dont post vids of stuff i make.
Go on go for it
Excellent idea!
Thanks Glenn, I wasn't sure if it would work tbh, just had to try it out
Nice one, love a diy stove
Cheers Nobby, it was an idea bursting out my mind
beautiful camera work, brilliant idea
Cheers for the help dude 😀👍
Consider making double row of holes about 1/2 inch apart.
Nice idea, interesting stuff!
Cheers dude, it was just another 1 of my silly ideas 🤣😂
Fill the tube with gauze and loft insulation and thr fuel should last longer, great idea though bud
Cheers for the tip keV, glad you like 😉👍
What kind of alcohol with blue collar did you use Sir ???
Methylated spirits
@@manstufftvOriginal Thank you for letting me know something NEW.
Clever bugger ain't ya mate. Coffee anyone ??
The wife calls me something like that (smart arse) I think she said🤣😂👍
Nice mate.
Cheers tim
It needs refinement but it should work ok
I am going to try this
Larger diameter and longer length pipe/tube might be better😀👍
Did you try it?
How did you get on?
Did u make it work better?
What improvements did you do?
Good skills mate !
Cheers Eddie, I had to try it out, just hope it will boil water 😂🤣👍
interesting concept, nice one 👍
Thanks dude 😀👍👍👍
Nice job mate. Can you tell what type of gas and solder. ? Is this soldering or brazing?
Gas is a mixture of butane and propane commonly knows as map gas and the solder is lead free plumbers solder oh and the flux is standard plumbers flux.
Thanks for watching and commenting 😃👍
i dont see the use for this? dont seem to last long either
I was experimenting and it never went any further than that
Thanks for watching and commenting
@@manstufftvOriginal that happens to me as well lol
Ustam bunu mazot la çalışanını yaparmisiniz
no Desafortunadamente
@@manstufftvOriginal nedeni mazotla olmayışı mi yoksa yapamıyor olmanız mi
@@eneskara868 no funciona con diesel
Creo que la soldadura no va a durar mucho
Solo 1 forma de averiguarlo, Haz 1 y pruébalo. Nunca fui más lejos con ese experimento. Gracias por ver.
@@manstufftvOriginal uuu llevo haciendo como 7 cocinas y el estaño se derrite por la temperatura. Gracias por contestar!
@@juanchonogacz6192 Bien hecho por intentarlo 😀👍
You two seem to know an awful lot about hair dye kits ... Nice ,handy, little stove idea , Ant ... But totally suspect on those 'raven' locks now pal .
😂🤣😂🤣👍👍👍👍
Utter bollocks
Thank u for your constructive criticism 😂🤣