395 weighs about 205,000 #. Maybe down to 135,000 to 145,000 with the counterweight, little mast, and bucket removed. I like those Cozad (Tom Pistachio) trailers and Murrays (Chaz Murray) trailers, they don't permit well going East but they are excellent design and provide a much lower empty weight than a 13 axle rig does to end up grossing the same but puts more payload on the truck out West. I ran 13 axle traffic in 32 states for about 10 years before I retired. It was mostly drill rigs and transformers with the occasional trac-hoe mixed in. I worked with a lady pilot car driver who had been a bullhauler before she went to the pilot car, she was a feisty lady. One day when we stopped to eat, the waitress was a smart a$$ for no apparent reason. My pilot car lady super glued the plates, the silverware, the glasses and cups,......and the tip to the table. You gotta watch those lady bullhaulers!
What a superb excavator, good design and manufacturing using quality parts and components to create a reliable, robust machine capable of high output in challenging conditions, requiring only routine maintenance. Thank you for this excellent video on a machine that changes our environment for the better. This video is also a reminder that in our world everything gets moved by trucks and vans by Professional Drivers ensuring that everything gets delivered to whomever needs it, on time and budget!
None of these videos show how the flatbed trailer is raised off the ground for moving. You see the truck backing up to the flatbed trailer and it ends there. What raises the flatbed with the Cat on it off the ground?
I like the fact that the counterweight swings out as it's being lowered instead of straight down like the 390F. Easier to get the truck centered under it .
Verry impressive I wonder y CAT didn't use there own forklifts instead of a hyster and a Toyota or is it the expo forklifts so CAT didn't have to bring extra machines
Its interesting to watch this haul which is done the familiar way for North America (Cozad with Jeep type add on trailer groups) and compare it to Europe and the type of trailers and of course trucks used. I think the main thing is the lack of maneuvering room in Europe, hence the COEs of course but also the common use of shorter length but maneuverable multi axle individual wheel steerable trailers and 4 axle Trucks. And yeah that is a nice truck, for a Freightliner.
So, what does it weigh with the counterweight, the small stick, and the bucket, removed? It looks like one of Chaz Murrays or Tom Pistachio's trailers, it's Tom's trailer. Good equipment but difficult to permit going East. I mostly pulled a Seibert 9 axle trailer with a hundred ton deck. It could go into California because it has a walking bean last tridem.
@@AwesomeEarthmovers вот это мощь вот это сила научите русских роботать взрыв мозга спаси христос водителей у них семьи дети.🤲🏽🤲🏽🤲🏽🤲🏽🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻❤❤❤❤🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻💜🖐🏻🖐🏻🖐🏻🖐🏻🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🔥🔥👍🏼🔥🔥🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽👍🏼🍭🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽👍🏼👍🏼👍🏼🔥👍🏼🔥🔥🔥🔥👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
A company I worked for years ago ordered and bought a 5110 built as an excavator.We had to tear it down and shipped in pieces.The tractor itself went on a frame trailer.Glad when they sold it.
Where do they take it after the show is over. Is that the truck they use it to haul it the entire way or does it go somewhere and then loaded on different truck
Eberhard from Switzerland has a 395F Long Front. Also Aregger has the A-Rex, google it, its basically a Mining Liebherr converted into a Demo Beast. In Germany Hagedorn got a KMC1600S which is based on a Hitachi EX 1200. Europe has huge Demo machines look it up you should like it
American floats ( low boys ) really look cumbersome. How they have to split the gooseneck and the trailer just to load always amazes me. What’s wrong with simple ramps and a deck widening
You are comparing a low boy with a standard deck trailer. Two different things and purposes. A low boy keeps the load low for clearance. If it’s on a standard deck it will be too tall. If you have a low boy style trailer you do not want to load it from the rear. Going over the wheels and the back hump in a huge tractor would be a nightmare.
Really don’t understand the need for that length of a trailer and dolly for that kind of load😒 here in Europe nothing that stupid long unless carrying double that weight 🤔😁 Great video of course!!!!!
Different country, different rules They do it maybe because there is a law where each axle must be separated in particular distance I think norway/sweden had similar law, where their trailer are longer when in load, and shorten when empty
Guessing the machine weigh over 150k after counter weight, Dipper stick and bucket are removed. It's about weight distribution over the axles, spacing and braking. th-cam.com/video/rgjHnKiNNdU/w-d-xo.html
They use those to spread the weight of the load more evenly over the Axles , 1 it helps them be in compliance with Bridge Law, Google it, 2 its to not destroy the roadways with excessive weight. That machine when transported like that is at least 150,000 lbs.
Morello Crane I really don’t know why you would consider tracks to not be a strong connection point as they are designed to handle greater forces than a chain link that’s attached to them. It’s possible that it’s a catch all rule as tracks on older equipment may be vulnerable to slipping off the idler.
That's how I have always chained them up from the track also and if you look on a decal on a dozer it shows you to tie down from the track but we also had a DOT officer hand out a citation to one of our drivers for chaining a 320 from the tracks. We drive for a CAT dealer. I think it depends on the DOT officer mood
I've never seen an excavator video quite like this one. The way the operator maneuvers the machine with such precision is truly awe-inspiring
The power and precision of these machines are outstanding.
395 weighs about 205,000 #. Maybe down to 135,000 to 145,000 with the counterweight, little mast, and bucket removed. I like those Cozad (Tom Pistachio) trailers and Murrays (Chaz Murray) trailers, they don't permit well going East but they are excellent design and provide a much lower empty weight than a 13 axle rig does to end up grossing the same but puts more payload on the truck out West. I ran 13 axle traffic in 32 states for about 10 years before I retired. It was mostly drill rigs and transformers with the occasional trac-hoe mixed in. I worked with a lady pilot car driver who had been a bullhauler before she went to the pilot car, she was a feisty lady. One day when we stopped to eat, the waitress was a smart a$$ for no apparent reason. My pilot car lady super glued the plates, the silverware, the glasses and cups,......and the tip to the table. You gotta watch those lady bullhaulers!
At least she didn't taze her.
Kozad trailer heard something like that before but the trail king and landol are pretty nice
ช
@@bradkaberline5828
そ
What a superb excavator, good design and manufacturing using quality parts and components to create a reliable, robust machine capable of high output in challenging conditions, requiring only routine maintenance.
Thank you for this excellent video on a machine that changes our environment for the better.
This video is also a reminder that in our world everything gets moved by trucks and vans by Professional Drivers ensuring that everything gets delivered to whomever needs it, on time and budget!
QERTUAsDGHCB17👍
Ну нескажи.
I like how someone used one of the holes in the right tread as a cup holder and the cup falls out at 0:40 haha!
Amazes me how these big machines are built.
Ь 2 в
Catの395の新車ですか😃迫力がありカッコいいですね!👍😆
Kanalıma beklerim
This is the real deal. Piece of equipment loaded, chained down and transported properly. Quite impressive.
Nice Cat excavator 395 👍👍👍👍👍👍👍👍👍☺☺
It is beautiful
Cool Video, The New Generation Caterpillar Hydraulic Excavator 395 Is Awesome
In case of emergency this is not sufficient too tie such a huge machine, they should tie the chains to the frame or to the body.
Body??? Lol you sure about that.
That thing ain’t goin nowhere
QETUOPAsDFHCB17👍
I just wish I could get a job with some of you guys...🤦♂️🔥🔥👍
Hmmm impressive machine having new Caterpillar CAT logo along red side line...😎
None of these videos show how the flatbed trailer is raised off the ground for moving. You see the truck backing up to the flatbed trailer and it ends there. What raises the flatbed with the Cat on it off the ground?
What your camera use? Thank
❤ this is what boy aser l like so much my job thank you for this video 😊
In Vietnam, I don't have a scooter like this
I am building a model of this and the vid will be super helpful. Thanks!
Well edited video. Not too long, not too short.
CAT 395 IS AWESOME BUT THE GUYS TRANSPORTING IT ARE ON ANOTHER LEVEL 👍
Dukes 001 no. No they aren’t.
Counterweight of this behemoth alone weigh 15 tonnes?😯🤔
I like the fact that the counterweight swings out as it's being lowered instead of straight down like the 390F. Easier to get the truck centered under it .
peterlanum YES! Me too
Qq11q0
@@davidbradford1513 j
@@gracevecino5553 aaaaaaaAaaaaaaAAAAAaAAaaaaaaaaaaaaaAaaAaaAAa
Verry impressive I wonder y CAT didn't use there own forklifts instead of a hyster and a Toyota or is it the expo forklifts so CAT didn't have to bring extra machines
Cat owns Hyster...
Its interesting to watch this haul which is done the familiar way for North America (Cozad with Jeep type add on trailer groups) and compare it to Europe and the type of trailers and of course trucks used. I think the main thing is the lack of maneuvering room in Europe, hence the COEs of course but also the common use of shorter length but maneuverable multi axle individual wheel steerable trailers and 4 axle Trucks. And yeah that is a nice truck, for a Freightliner.
E
Thank you not something you get to watch everyday. 👍👍
……涗;;;.….:六 .一😇😇😇😇😇😇😍😍😚🤪🥸🥸😞☹️🥺😡🥶🤫🤥😱😨😰🙄🤥😓😓🤥😥🤗👹👹👿👿😈🤠🤑💀👻💩🤡👺😼😻😹😺🚗☠️☠️😼😼😻😻😹😹😸😸🤲🏼😾😾🤲🏼🤲🏼🤲🏼😾😾😿😿🙀😽🙀🙀👍🏼👏🏼👍🏼🤝
So, what does it weigh with the counterweight, the small stick, and the bucket, removed? It looks like one of Chaz Murrays or Tom Pistachio's trailers, it's Tom's trailer. Good equipment but difficult to permit going East. I mostly pulled a Seibert 9 axle trailer with a hundred ton deck. It could go into California because it has a walking bean last tridem.
Caterpillar machines rule the earth 🌍
Wow big cat...
Good...good cat
Wonder what that pig weighs in at on the trailer. Can't wait for more Conexpo videos.
Richard H Fehrenback II all dressed up over 185,000 pounds sir
That’s awesome
Caterpillar #1👍👍👍👍l like this video
ConExpo was such a great show. Shame the virus made the turnout less than ideal. Can't wait to be back in 2023
Ahora con este virus, y el toque de queda que tenemos República Dominicana,yo entretengo mirando estos vídeos son excelentes para mi
Thanks! That's such an amazing excavator!!
Great video as always. Thanks for taking the time and effort on these.
PushinDirt Thanks, lots more to come!
@@AwesomeEarthmovers вот это мощь вот это сила научите русских роботать взрыв мозга спаси христос водителей у них семьи дети.🤲🏽🤲🏽🤲🏽🤲🏽🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻❤❤❤❤🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻🖐🏻💜🖐🏻🖐🏻🖐🏻🖐🏻🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🔥🔥👍🏼🔥🔥🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽👍🏼🍭🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽🤲🏽👍🏼👍🏼👍🏼🔥👍🏼🔥🔥🔥🔥👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
A company I worked for years ago ordered and bought a 5110 built as an excavator.We had to tear it down and shipped in pieces.The tractor itself went on a frame trailer.Glad when they sold it.
Hey! GES show labor at 10:00 on the forklift.
Muchas gracias
Nice video, good 👍👍
nice video
Gracias por mostrarme todo lo que se necesitará para la junta ejidal en Veracruz Veracruz puerto
Wow that is something when it drops its counter weight for legal move
looks like the Cat got a nose job!
Where do they take it after the show is over. Is that the truck they use it to haul it the entire way or does it go somewhere and then loaded on different truck
Probably Tinaja
@@dirtdiggur to make more tunnels
Matt Taylor I moved it to Easton massachusetts on a beam trailer
X Recon usmc great work, very different to the way we haul or move heavy machinery in England
Nice shots.
Cat...N1. Ciao da Italia 🇮🇹
WHY ARE THEY NOT USING A CAT FORKLIFT TO DISSEMBLE THE MACHINE,.?
Dwight Arnold because the forklifts belong to the rigging company at the convention center
Ahern rentals has pretty much all the conventions covered with man-lifts and forklifts
GES is show labor.
Great catch dude. Super video as usua
Tres belles machines bravo cat un ancien conducteur as la retraite tres beau metier aller les jeunnes aux boulot
Would be badass to see a 395 in a long reach demo setup
Eberhard from Switzerland has a 395F Long Front. Also Aregger has the A-Rex, google it, its basically a Mining Liebherr converted into a Demo Beast. In Germany Hagedorn got a KMC1600S which is based on a Hitachi EX 1200. Europe has huge Demo machines look it up you should like it
QERTAsDGHCB17👍
Thiết kế năm 2020 quá đẹp
Đúng vậy. Nó lớn hơn Cat 390 nữa
Wow, the brand new Cat 395 Next Gen!!! :O
Great catch dude. Super video as usual 👏
nice
Awesome 👍
moving big cat
Amezing Machines...😎😎
Is it legal for that truck not to have a tag
matthew anderson I’m legally fit for what I’m moving
The trailer has more than enough axles. Nice set up and load. biggest I have transported was a 369 on 4 axle tractor 2x3x2 low boy
American floats ( low boys ) really look cumbersome. How they have to split the gooseneck and the trailer just to load always amazes me. What’s wrong with simple ramps and a deck widening
You are comparing a low boy with a standard deck trailer. Two different things and purposes. A low boy keeps the load low for clearance. If it’s on a standard deck it will be too tall. If you have a low boy style trailer you do not want to load it from the rear. Going over the wheels and the back hump in a huge tractor would be a nightmare.
Is that a counterweight in the back of the machine ?
Yes, you're right
How many tons is it that truck or bether tell lowboys transporting?
Quelle machine de rêve . La personne qui va la conduire vas regaler
Really don’t understand the need for that length of a trailer and dolly for that kind of load😒 here in Europe nothing that stupid long unless carrying double that weight 🤔😁 Great video of course!!!!!
Different country, different rules
They do it maybe because there is a law where each axle must be separated in particular distance
I think norway/sweden had similar law, where their trailer are longer when in load, and shorten when empty
Guessing the machine weigh over 150k after counter weight, Dipper stick and bucket are removed. It's about weight distribution over the axles, spacing and braking.
th-cam.com/video/rgjHnKiNNdU/w-d-xo.html
Some states in the USA have strict bridge laws. It is a term used to spread out the weight per axle.
@@scruffy6151 EU are also rules per axle weight. But you never see that long of a lowboy here, no need for it .
They use those to spread the weight of the load more evenly over the Axles , 1 it helps them be in compliance with Bridge Law, Google it, 2 its to not destroy the roadways with excessive weight. That machine when transported like that is at least 150,000 lbs.
correct me if I'm wrong but DOT in NH told me its Illegal to binder to the tracks because they are not a strong enough connection point.
Morello Crane I really don’t know why you would consider tracks to not be a strong connection point as they are designed to handle greater forces than a chain link that’s attached to them. It’s possible that it’s a catch all rule as tracks on older equipment may be vulnerable to slipping off the idler.
Wouldn't matter where it was chained to if that thing decided to move it would move!, its almost in the doesn't need fixed down category.
That's how I have always chained them up from the track also and if you look on a decal on a dozer it shows you to tie down from the track but we also had a DOT officer hand out a citation to one of our drivers for chaining a 320 from the tracks. We drive for a CAT dealer. I think it depends on the DOT officer mood
Nice that's a great job to have
That is a bad machine pretty cool
後ろのウェイトって単独で外せるんですね、すごいなぁ。
てっきりフックがあるからクレーンで吊って乗せるのかと思ってました。
メーカーもよく使いやすいように考えてますね。
I did not know that much work was involved to get that onto the trailer! Great video for sure
QERTUAoPSDFcB17👍
These guys have got to have "logistics coming out of [their] ears", as General Colt from _Kelly's Heroes_ would say!
yea, this show only happens every 3 years. so plenty of time to plan
]
Iiiiii
@@kyledunmir3 ผผผผงผวววววผสสส
@@kyledunmir3 ผผผผผผผผผผผผ
Notice the black new tract's, it is brand-new, O M G
very nice video, thanks
Great great work 👉👀🔝
What a impressive machine! But the new CAT logo looks like some toy logo.
Super 👏👏👏👏👌
Máy Xúc CAT to đẹp. Tôi rất thích
È una bellissima macchina “spettacolare “👍
bello, però la scritta 395 e troppa piccola!!!!!
Non immaginavo facessero la Next Gen anche per il 395... meraviglia pura!!!
'If it ain't a Cat it's a Dog!"
They have a new logo?
Pra que serve esse hidráulico na traseira da escavadeira?
🎟️🎟️
Kanalıma beklerim
I hope your show more videos like this
Really great excavator!
Another magnificent CAT, What is its weight?
190,000
The way it was configured was 207,000 lbs with the bucket.
@@ryanneal7836 Thanks! So, ranging from 190,000 lbs (86tons) up to about 207,000 lbs (94 metric tons) with bucket. Impressive excavator.
Love the new logo
That's a lot of tires. Hate to be a tire guy and have him come in 5 minutes before closing for all new rubber!
Muy bueno me gustan los fierro es pacion por las maquinarias viales
Máquina extrema
wonderfull
Only a 3 axle tractor to pull that trailer??? And it’s a Freightliner to boot!
Wonderful
I wonder what that big girl weighs she must be pretty dang heavy now for sure to break it down like that
190,000
ran a 375 for a few years would love to try that
Not as big fan of new cat badging as their older last one but its how we date macheanery
What is the salary of an excavator operator please?
has anyone posted the tonnage of the counterweight?
Tim F Hi Tim when I move this machine it goes on a separate truck. It’s weight is 17 tons
Boom and other stuff goes on the second truck as well? So it's a 2 truck move?
That's one hell of an excavator and truck. Good video.
What was the loaded height?
Not crazy about the new logo
World no1 brand
Y si yo las tengo que solicitar cómo apoyo a mi juntas solo explique me por favor
As always awesome video man