Thank you so much for posting this video!! I just bought this camera because I want to start a TH-cam show. BUT the manual that they make you download was useless! YOU are so much more informative!! Thank you so much!!!
Hello. Just purchased one of these cameras. Can you please confirm, is the case waterproof with both types of backdoors that come with it? In your video you detach one back door that appears watertight for a backdoor that has two slits in it - hence my concern. Thanks
I ended up taking this to Hawaii last week and took the risk with the original case and tried it while I snorkeled, and it worked! No water got in, pictures turned out and camera survived 😂. I did try it in the sink first as a sanity check before diving into the ocean haha. Worked for me but try at your own risk !
Tip: Use the housing instead of the tripod adapter and zip ties. It allows the camera to be much more secure and allows you to easily remove it. It also uses less parts which makes it more compact and less complicated. If you need sound, use the other door with the housing. The waterproof housing won't move or unscrew like the tripod adapter either.
Note: keep the cable tie a little loose. I'm talking about the one that wraps around the camera and mount to keep the camera from falling out. I made mine a little too tight so the case activated the shutter button. This put the camera in a bad state which could only be remedied by removing and reinserting the battery. Took me two hours to figure that out.
@@akasoofficial so like I had all but I lost one of the screw part from which you take out the thing attached to the waterproof case is there any way I could order it separately?
I must have gotten the wrong model of that black case (called "Clip 1" at 0:42) bc mine seems just barely too small for the camera. When I squeeze the camera in to get it snug in the case it seems like there's not quite enough room for it and sometimes it even pops out! I'm enjoying the camera but I would not trust the case to hold it in for stuff like biking or running with it on my chest, even with the zip tie. 🙃
The clip 1 usually comes with the camera. But some models don't equiped with it. Would you mind sending a pic of your camera to cs@akasotech.com, so that they could check for you?
I just received my EK7000 and I'm trying to unbox it, but mine is mounted backward on the top of the box compared to the one in the video. I can't wait to try it out, but I really don't want to break anything, and I can't seem to get it to budge very much without applying A LOT of pressure.
No need to change the door usually. The one shown in the video has two holes to let sound in. If you need the waterproof feature, it's best not to modify the door.
To stick to a surfboard will be the same as the one for the helmet? It works under water? I am wondering if the stick will stays for long under water🤔🙄...
Hye may i know why the quick release buckle is different compare to 2020 edition? The previous one is similar to the gopro type. But 2022 model seems different and bit hard to release… anyone here noticed?
Followed the instructions on this video for how to install the camera to the waterproof case. In the video the back door with the slits is used so I followed suit. Within seconds the camera was flooded with water, should I have used the original back door?
@@akasoofficial seems odd for the official account to install the camera to a non-waterproof door under the heading 'how to install the camera to the waterproof case'
I´ve got a question, can It be somehow mounted on FAST MT helmet like on the nvg mount? like I tought I could just glue the adapter what is shown on the first helmet to the nvg mount. I wonder if there are any other ways to do It or I need to buy gopro ngv mount.
sallve,acessori che fai vedere di minuti 1:19 che dopo fai fissare con tasca della camice il mio da parte spra fissa bene pro da parte sotto 3,,,4 mm va avnti dietro non é che fissa proprio vorrei chidere che questo pu fare problemi per me che quando fisso sul tasca di camice é cadera????GRAZIE MILE🙏🙏🙏
Mi dispiace, ma non riesco a immaginare quello che stai descrivendo. Ma è sicuramente possibile testarlo in un luogo sicuro prima di utilizzarlo ufficialmente. Buona fortuna.
I can’t even find a computer with an SD slot anymore so I’m hoping I won’t need one and can just upload direct to my phone and share my photos/ videos that way?? Thank you so much for this video. I had a hard time getting the back door off I felt like I was going to break it but I finally got it off and put the waterproof one on.
Thank you for your comment! It's great to hear that you found the video helpful. Nowadays, it's true that many computers no longer come with an SD slot. However, you can still easily upload your photos and videos directly to your phone using the "AKASO GO" mobile app or a phone card reader. This way, you can easily share your content with others. Let me know if you have any more questions!
I bought this camera for open water swimming so I am not mounting to anything. Not sure how to use it while swimming or even how you recommend strapping to a wrist. As it is a waterproof camera, that info would be very helpful! You also need to update the video regarding the 2 backs to the camera so we doing flood the compartment.
yes! Why does the video give instructions for 'installing the waterproof case' and then put on the back with the open slits !? Wasn't the waterproof back already on!?
@@akasoofficial ummmm I bought a waterproof camera to use underwater! It came with 19 different mounting adaptors and yet to use it underwater, I have to go buy a separate wrist mount/adaptor?! There isn't anywhere to even attach a lanyard!?
Only SD cards are required. Different models of cameras are adapted to different types of SD cards. You can tell me which model you want to install it in.
Can this not be mounted to an actual motorcycle helmet like for a super sport? I feel like the adhesive is not gonna Hold The camera if I'm going 140mph
Sorry this is a hard question to answer in words. Maybe you can just google "how to mount a sports camera on a full mask snorkel" for a video that will make it clearer.
Alguien sabe q que accesorios son compatibles la akaso Brave 7? Quiero los cristales templados y el protector de lente de plástico o goma y no se si la de la Osmo le queden, saludos
Hi there, it depends on the helmet you owned and the angle you plan to capture. The mount can be used on the top or the side even the bottom, as long as it can be stuck to the helmet.
We apologize for the inconvenience of your viewing, it is true that we did not consider the details during the production of the video. Thank you for pointing this out and we will definitely take this into consideration in future video productions. If you have any doubts about this video, please clarify with me and I will send you the video content in text form.
It is REALLY hard to get it off the plastic part of the box. Had to get a very strong person to help and he cut his thumb open. Just know you have to apply a lot of strength.
Honey I'm sorry this happened. When removing it from the box you can remove the waterproof case first. Then lift the clips and pull the base backwards. It's actually quite simple. But this video was taken a long time ago. We'll be updating it again soon with a new video to make it easier to understand.
Well there's my problem... Came to this video to see if I was missing something becasue I could not for the life of me figure out how to actually attach the camera to any of the mounts, and it's because my camera did not come with that little piece used at 3:26... So i literally can't use any of the mounts unless the came is in the waterproof case... 😂👌🏻
Could you please provide more details on the issues you're facing with our dismounting system? Our customer service team is here to help address any concerns you may have. Thank you for reaching out!
This video was a lot easier than manual 😂 thank you
Glad it helped!
Thank you so much for posting this video!! I just bought this camera because I want to start a TH-cam show. BUT the manual that they make you download was useless! YOU are so much more informative!! Thank you so much!!!
I just bought mine and I'm excited to get started.
Hello. Just purchased one of these cameras. Can you please confirm, is the case waterproof with both types of backdoors that come with it? In your video you detach one back door that appears watertight for a backdoor that has two slits in it - hence my concern. Thanks
I was wondering the same thing!
It's a valid question and I was wondering the same but it looks like they're not bothered to reply 😕
I ended up taking this to Hawaii last week and took the risk with the original case and tried it while I snorkeled, and it worked! No water got in, pictures turned out and camera survived 😂. I did try it in the sink first as a sanity check before diving into the ocean haha. Worked for me but try at your own risk !
The door with open slits is for dry use, while allowing for better audio input.
Yea it us
Tip: Use the housing instead of the tripod adapter and zip ties. It allows the camera to be much more secure and allows you to easily remove it. It also uses less parts which makes it more compact and less complicated. If you need sound, use the other door with the housing. The waterproof housing won't move or unscrew like the tripod adapter either.
Note: keep the cable tie a little loose. I'm talking about the one that wraps around the camera and mount to keep the camera from falling out. I made mine a little too tight so the case activated the shutter button. This put the camera in a bad state which could only be remedied by removing and reinserting the battery. Took me two hours to figure that out.
The best video so far that shows all accessories and connecting to various items. Great thank you so many accessories which was slightly confusing.
Glad that it helps.❤️
@@akasoofficial so like I had all but I lost one of the screw part from which you take out the thing attached to the waterproof case is there any way I could order it separately?
I must have gotten the wrong model of that black case (called "Clip 1" at 0:42) bc mine seems just barely too small for the camera. When I squeeze the camera in to get it snug in the case it seems like there's not quite enough room for it and sometimes it even pops out! I'm enjoying the camera but I would not trust the case to hold it in for stuff like biking or running with it on my chest, even with the zip tie. 🙃
The clip 1 usually comes with the camera. But some models don't equiped with it. Would you mind sending a pic of your camera to cs@akasotech.com, so that they could check for you?
Can you mount on tripod with waterproof case? I am recording outdoor sports with mine....
Yes
The one and only thing I need to know is how do you format the sd card? I put it in and it just says format. But HOW!!!!!!!!
Is it a micro SD card? The instructions do not specify
www.akasotech.com/support/EK7000 This is the manual for the EK7000, page 18 of the instructions, “Reformatting Your Memory Card”.
@@denisebriodyescobar40 yes, micro sd. you format it after you insert it in the camera, in the menu you find a Format option
This video was very useful to me, thank you very much!!
Best mount to use while scuba diving?
Selfie sticks are generally recommended for diving.
Same question here. There doesn't seem to be a way to attach the waterproof case to a selfie stick, unless I'm completely missing it.
Hi, what is the tool used at 00:29 to remove the mount buckle from the waterproof case? It didn't come in the box, and I can't undo the buckle by hand
It's a plastic wrench specifically designed for that piece. You sure it's not in the box? Pretty important piece. Maybe you can contact them?
Hi, if that wrench didn't come with the package, please contact cs@akasotech.com, our customer service representative will help to solve the problem.
This is helpful. Thank you. I just bought an Akaso Brave 7 LE and I'm pretty sure the accessories are pretty much the same as these.
So we need to zip tie it all the time :/ it doesn’t even fit in the clip case without moving around, but what ever going to make it work :p
That was good, super helpful
This was just what I needed!
I just received my EK7000 and I'm trying to unbox it, but mine is mounted backward on the top of the box compared to the one in the video. I can't wait to try it out, but I really don't want to break anything, and I can't seem to get it to budge very much without applying A LOT of pressure.
AHA, never mind, got it - was not easy!
Had the same problem and was looking for a solution but turns out you’re right. Just requires more effort than expected
Is the remote controller waterproof. I eFoils and may fall in the water holding the controller.
has anyone found a good way to hold it underwater wih a wrist strap in case you let go?
I would also consider attaching a float in vivid color so if you do lose it it floats to the top and you can find it.
Thank Thank you for this video…. so many videos about the camera waffling on when this is all you really need 👍
Glad it was helpful!
What attachments should I use under water, diving or snorkeling?
Most people will use a floating stick or selfie stick.
Yeah that’s what I’m confused about.. none of the attachments seems to work? Even tho that’s the whole reason I bought it
I've put the SD card in and it just says i need to format it, but have no idea how to do it.
Same here. I find no way to format it on the camera. And if on PC format to what? Fat32? Exfat? Ntfs?
Do you have to change to door for the casing to be waterproof. The door looks identical to the one already on the casing.
No need to change the door usually. The one shown in the video has two holes to let sound in. If you need the waterproof feature, it's best not to modify the door.
To stick to a surfboard will be the same as the one for the helmet?
It works under water? I am wondering if the stick will stays for long under water🤔🙄...
Hi, please check this video: th-cam.com/video/nBoydY1K-M4/w-d-xo.html
Hye may i know why the quick release buckle is different compare to 2020 edition? The previous one is similar to the gopro type. But 2022 model seems different and bit hard to release… anyone here noticed?
Is there a demonstration of the body mount somewhere?
Absolutely! We have a demonstration of the body mount available. You can find it th-cam.com/video/WlARadAg-Hc/w-d-xo.html. Hope that helps!
Followed the instructions on this video for how to install the camera to the waterproof case. In the video the back door with the slits is used so I followed suit. Within seconds the camera was flooded with water, should I have used the original back door?
Yes, if you want it to be waterproof, please use the original back door. The door with holes will allow sound to be recorded but not waterproof.
@@akasoofficial seems odd for the official account to install the camera to a non-waterproof door under the heading 'how to install the camera to the waterproof case'
@@LeonNixon-mc4yi You do have a point. We are considering creating a new video about that. Thank you.
@akasoofficial thank you. Its not much consolation being on a once in a lifetime trip with a broken camera but I'm sure it will help others
@@akasoofficial Yes, please do. The video is confusing and not helpful and could ruin the camera.
Thanks
The mount that goes directly on the camera is that supposed to come with it? Because I cannot find that anywhere
I´ve got a question, can It be somehow mounted on FAST MT helmet like on the nvg mount? like I tought I could just glue the adapter what is shown on the first helmet to the nvg mount. I wonder if there are any other ways to do It or I need to buy gopro ngv mount.
An NGV mount could be a better option. However, the sticky mount included in the package can also work well for your helmet.
sallve,acessori che fai vedere di minuti 1:19 che dopo fai fissare con tasca della camice il mio da parte spra fissa bene pro da parte sotto 3,,,4 mm va avnti dietro non é che fissa proprio vorrei chidere che questo pu fare problemi per me che quando fisso sul tasca di camice é cadera????GRAZIE MILE🙏🙏🙏
Mi dispiace, ma non riesco a immaginare quello che stai descrivendo. Ma è sicuramente possibile testarlo in un luogo sicuro prima di utilizzarlo ufficialmente. Buona fortuna.
What a brilliant idea
White background and white subtitile
Black outline
How to you add it to a riding helmet?
Thx. This is very helpful
So during the helmet mount the camera piece clips onto that buckle part, is there any way to remove that piece?
Hi. Please refer to this video. Hope this can help you.
th-cam.com/video/IDi7mU-uWMw/w-d-xo.html
Great job making awesome affordable cameras
Please let me know the usage of the extra backdoor??
Allow the camera to catch the sound even with the case.
I can’t even find a computer with an SD slot anymore so I’m hoping I won’t need one and can just upload direct to my phone and share my photos/ videos that way?? Thank you so much for this video. I had a hard time getting the back door off I felt like I was going to break it but I finally got it off and put the waterproof one on.
Thank you for your comment! It's great to hear that you found the video helpful. Nowadays, it's true that many computers no longer come with an SD slot. However, you can still easily upload your photos and videos directly to your phone using the "AKASO GO" mobile app or a phone card reader. This way, you can easily share your content with others. Let me know if you have any more questions!
Do you have to change the backdoor for it to be waterproof. The doors look identical?
I bought this camera for open water swimming so I am not mounting to anything. Not sure how to use it while swimming or even how you recommend strapping to a wrist. As it is a waterproof camera, that info would be very helpful! You also need to update the video regarding the 2 backs to the camera so we doing flood the compartment.
Hi, if you want to use it underwater I suggest you buy a wrist mount or a floating hand grip to hold the camera in place.
Waterproof case with body chest mount or the floating hand grip.
yes! Why does the video give instructions for 'installing the waterproof case' and then put on the back with the open slits !? Wasn't the waterproof back already on!?
@@akasoofficial ummmm I bought a waterproof camera to use underwater! It came with 19 different mounting adaptors and yet to use it underwater, I have to go buy a separate wrist mount/adaptor?! There isn't anywhere to even attach a lanyard!?
Do I need an sd card or a SIM card. And how do I find the exact one?
Only SD cards are required. Different models of cameras are adapted to different types of SD cards. You can tell me which model you want to install it in.
Will i get all this attachment with box
😥I'm afraid not.
Can this not be mounted to an actual motorcycle helmet like for a super sport? I feel like the adhesive is not gonna Hold The camera if I'm going 140mph
Hi, some of our customers would recommend mounting the camera with a Chin Strap Mount if for a super sport helmet.
Best video ever. great knowledge
How do I mount to a full mask snorkel?
Sorry this is a hard question to answer in words. Maybe you can just google "how to mount a sports camera on a full mask snorkel" for a video that will make it clearer.
Alguien sabe q que accesorios son compatibles la akaso Brave 7? Quiero los cristales templados y el protector de lente de plástico o goma y no se si la de la Osmo le queden, saludos
For the helmet mount does it have to go onto the side or can it just go on the top?
Hi there, it depends on the helmet you owned and the angle you plan to capture. The mount can be used on the top or the side even the bottom, as long as it can be stuck to the helmet.
@@akasoofficial thank you I put it on and it seems to be working fine
@@game_slayer2182 Just enjoy the EK7000 😊
Nice
Thanks
can not get the camera off the box the latch broke. ^%**%$#
But how can you get Cable ties off?
I hope this article helps.
www.wikihow.com/Open-Cable-Ties
@@akasoofficial thy
Did any of you have issues with the batteries?
Hello, if you have any questions, please feel free to contact our customers at service:cs@akasotech.com.
Thanks for this
❤❤❤
and to mount it on a baseball cap?
😥 I think baseball cap is hard to hold a camera securely. Maybe a different cap or a chest strap mount for the camera.
@@akasoofficial i bought it and has bad quality
Why for the love of god do you have your written instructions on this video in white font against a white background.?
We apologize for the inconvenience of your viewing, it is true that we did not consider the details during the production of the video. Thank you for pointing this out and we will definitely take this into consideration in future video productions. If you have any doubts about this video, please clarify with me and I will send you the video content in text form.
It is REALLY hard to get it off the plastic part of the box. Had to get a very strong person to help and he cut his thumb open. Just know you have to apply a lot of strength.
Honey I'm sorry this happened. When removing it from the box you can remove the waterproof case first. Then lift the clips and pull the base backwards. It's actually quite simple. But this video was taken a long time ago. We'll be updating it again soon with a new video to make it easier to understand.
@@akasoofficial I cut my finger trying to remove the clip off the packaging too. ☹
I wish this video showed you how to remove the camera mount from the helmet.
Bom dia ou vídro da proteção de lente da minha câmera akaso brave 7 quebrou alguém sabe onde eu compro outro
No manual de intruções tem um telefone que você pode se informar, ou entra no site que deve ter equipamentos pra vender.
Very helpful!!
Well there's my problem... Came to this video to see if I was missing something becasue I could not for the life of me figure out how to actually attach the camera to any of the mounts, and it's because my camera did not come with that little piece used at 3:26... So i literally can't use any of the mounts unless the came is in the waterproof case... 😂👌🏻
You go through a lot of zip ties with this camera. 😂
Zip ties are easily removable and reusable with this camera. Handy feature for sure.😝
what about a skateboard??...
Use of a chest strap or helmet accessory is most appropriate.
why do videos take so long to download?
You Didn't show how to mount in a sports Motor bike
Don’t use the adhesive helmet mount the adhesive is no good you will drop the cam or lose it all together
😍😍😍😍😍😍😍 y love you
핸드폰으로 영상 옮기는방법 알려주세요
Put a QR code to this video in the manual!
❤ Thanks for the advice
Woww......
What sd card do I need for this. You bastards?
A 64GB card at U3 speed will be okay.
This video is way too fast to watch. I had to reply it 30 times to watch what I needed to get started. Unhelpful.
Sorry, we'll make a more detailed tutorial video.
Your dismounting system is a joke. Seriously, its a real design failure.
Could you please provide more details on the issues you're facing with our dismounting system? Our customer service team is here to help address any concerns you may have. Thank you for reaching out!
Thank you! Thank you @akaso_official ! Just bought mine and needed help.
Is the remote controller waterproof. I eFoils and may fall in the water holding the controller.
The remote is not waterproof. Sorry.