A supposed Mark Twain quote: When I was a boy of 14, my father was so ignorant I could hardly stand to have the old man around. But when I got to be 21, I was astonished at how much the old man had learned in seven years.
I always say… the times I miss my dad most, are those times when (if he were still here) I would turn to him and tell him he had been right about one thing or another.
I don't have a ranch and I have never worked with barbed wire - and unlikely will ever do so - but I still watched this from start to finish. 😂 Thank you sir.
Still can use it for any other wire and some extent on string too. One i have been using is the bow saw tightening method with stick and two strings being rotated, but this seems far better in that extent. Could maybe even use it to create pull on smaller tree if you dont have ratchet strap or dedicated felling tools around.
This is such a cool trick! I used to do something similar with pliers but I just couldn't get it out in the same smooth way. Hammer saves the day, once again.
I’m 74, lived on a farm growing up and helped my uncle run fencing for the cow pastures. We used stretchers to tighten wires but I never saw this trick before. Pretty slick
Thats good, these damn 20 year olds now probably are too scared to get sweaty or dirty. You probably put more work in per day at 86 than the average 20 year old does in a week.
Same here 74, I don't work with barbed wire a lot, but I like videos like this . We can learn a lot from our dads, if they will take the time & we will listen and pay attention.
Done it with a hammer, modified fence pliers and home made t handles. The wrapping trick is the key and your explanation was excellent. Some will say it weakens the wire but then again doesn't everything. Years of mending fence says this works very well.
Agreed. Weakened wire is better than a hole. You have to be practical when you have livestock, that you don't want roaming. This is a fast and efficient way to repair a fence with minimal tools. If someone is stuck on one particular way they can always come back later and re-do it.
I love that he’s handing down knowledge that his father showed him. The older you get the more you realise what a privilege it is to have things like this to draw on from people you care about and to be able to share that knowledge with others 🙌💕
This method my grand father used back in the 1920s on the ranch and I always did it this way neat to see you showing it. It is the best way wire won’t slip back.
I'm 57 years old and know absolutely nothing about barbed wire fence, but I can offer another great tip... next time tell your camera guy to GET CLOSER !!!
Very nice! Thanks for sharing! After I get the splice done I usually just bite a piece anywhere down the length between the posts in question, and twist my lineman pliers (I think the tool is actually called a fence multi-tool pliers, but look a lot like lineman pliers), and make a "fold" or a "Z bend" then I can crimp it shut to flat. This can be done anywhere on the line, but they will occasionally cause the old, crappy, rust fence, that we've adopted on our 24 acre property, to break clean at the crimp point. I think your spice system might be a bit better, since I can use the mechanical advantage of the twisting with the hammer to get tension back to the next barb on both sides, thus avoiding the weak point(s) that I'm creating down the length of the fence. Cool idea, and thanks!
Some many “amazing” technique videos on TH-cam are a complete waste of time / impractical. It is lovely to finally find one that is so useful, thank you.
I'm 72 but a newby to fence fixin and have been trying to use a fence stretcher to tighten up the fence I built a few yesrs ago, just me & my tractor. Now THIS method looks much more affective! Thank you!
Dear GPRL I am 75 and that was an excellent way to tighten a Wire fence with simple tools that you could easily store in your Ute Permanently!! I had to laugh at the guy who said he had 46 Hammers suck in his fencing!!!
i'm not a rancher. i've never messed with barb wire. this just seems to be one of those 'nifty' tricks that is good to know. good job showing how to pull through the loop and then how to roll the hammer back over the loop to lock it in. this was cool. nice video.
I've been looking at a broken stretch of barb wire for 6 months but didn't have anyway to make a repair tight. I'm just back from fixing that annoying piece of wire. Great hack.
@@montanawarren8462 Remember..technique demonstration, not application.. illustration purposes(and possibly saving the cameraperson's back..if they arent 3-4' tall kid..), show the top wire, so viewer can see clearly, and also so instructor shows a more "relaxed' working pose.. Instruction has 3 distinct parts: demonstration, student learning, and application.. Someone else's Dad taught me to see the bigger picture, & to not keep it to myself..
@@jbuckley2546 ? You got ponies to clean up after I guess..was a neutral comment, not trying to one up anyone..but seems you need more attention than how life lessons work..
@@jbuckley2546 ..Just curious , if you have ever heard of a tool called a field expedient..it's kinda like a Swiss army knife in a way.. ("thistle" give us all a laugh!)
Really nice tip! If anyone of cutting multiple pieces of wire, I suggest larger cutters. the amount of hand pressure you see here puts your nerves in danger. I ended up with carpel tunnel from using the wrong tool, and it took a couple of years to recover fully. I don't want anyone else to go through that.
I moved onto a remote 1883 farm with about all the skills of first visiting my uncle's dairy farm as a kid. What a learning curve just for basics! I've almost got coiling down but nothing close to the stunning tight coils of those before me. Learned I had made a hash on DIY tightening as the elderly owner came out and slung around a heavy "goldenrod" like a maestro and schooled me right. Also very impressed with an old fencing wagon that was abandoned and melted into the grass. Tripped over metal and recovered 4 pre-1900 iron straighteners I thought were some kind of steampunk industrial come-alongs. Holy hell, how did they even LIFT those things much less WORK them? Good tip. 5,765 more lessons to go to just attain greenhorn status.
Wow, I don't have anything to do with fences, but I believe this could come in handy for many other applications. It's one of those tricks you want in your bag of tricks. Especially when SHTF. Thanks for sharing.
This is really cool.. I could have used this when I was still a city slicker learning all the "fun" things with keeping up the property... Earned a stripe or two quite a time ago, but not without of blood, sweat and hazing from relatives and locals.. Yeah, know your wire! I popped a few older older tensioning while repairing.. That can sting you if you push the old ones bast the limit.. I got bit.. Twice.. Anyway... There was no TH-cam back then but this is great info! Thank you for sharing!
A so turning the wire around the handle of the one screw driver and using usually there is hole for hanging it on the wall, but you put second driver trough it to increase leverage, the pulling back using rest of the handle and another end? Sounds pretty good actually, except slight torture for the tools. No thank you for sharing, didnt consider this and now its on my mental tool bag.
There are tricks to every trade, thank you, this is a great idea. We’re from Missouri, the show me state. Appreciate your efforts to make the video to show us how it’s done.
It would be interesting to know the history of some of these tactics. I am 51. My dad showed me this and I am sure his dad showed him. I am 51. From Alberta, Canada. Thanks
You need to force metal rod into wood to tie two peaces together=rock, nah it does work but might hit your hand between so lets add a handle=stone axe if sharpened peace is added and hammer otherwise. Well now i need to remove it to salvage nail since those are extremely valuable at the time. Well cant pull it or hit it out effectively.. perhaps something that goes around the nail back end= peace of metal with slot in the middle. Hey lets add this to hammer so it can both remove and install nails and lets make it from metal! Ou there is not much force to pull the nail, not enough leverage, lets add this bend on the puller side for that=more of less modern hammer. Then someone needed to tighten wire and realized you need more leverage, had seen how pulleys and hoists worked to decided to use hammer head as a pulley and use handle as leverage since that was all he had around that the time. Something like that in short form is probably what happened.
@@mattbrown837 I've done this to tighten wire because, being a girl, I'd only ever been told to "stay back in case the wire breaks" instead of being taught how TO do such things. (Glad to know I wouldn't have been laughed at for my figure-it-out fix.)
I learned this hack way back in 1978. My Dad taught us all how to splice barb-wire fences that were damaged/broke/cut. This is the first time I've seen it demonstrated.
@@ianmacfarlane1241 Also just looked at it apparently in 1955 MIT nerds were using the term... so maybe you need to research before just commenting random stuff
@@tristancoffin Ah, another smartarse - must be something in the air. I obviously wasn't talking about the term "hack" being used in the World of computing, unless you see fence repair as being part of the computing sphere. I was talking about "hack" being used as a substitute for "tip" throughout the general population - decorating hacks, baking hacks, gardening hacks, cleaning your bathroom hacks, homesteading hacks etc etc. None of these have anything to do with the computing World. "Hack" meaning tip only entered general usage a few years ago, even if, decades ago, it was used in a different context in the coding World. Next time you want to shoot someone down over an Innocent comment, it'd probably be a good idea to engage your brain first.
Thank you, for sharing your Dad’s great information on splicing barbed wire fencing back together. My wife and I inherited the small family farm. We are dealing with unscrupulous hunters that cut the wire to poach our deer and other animals that we have posted no hunting on our property. I need to repair the fencing that they cut, I really appreciate the tip that you have demonstrated in your video that your dad taught you, it is great. Thank you, and I really appreciate it very much and glad that your dad took his time and his patience to teach his skill onto you so that you could pass it on also.
As a hunter, I would say… Put up some hidden trail cams, and then turn in the poachers (so they will never get a license again)! And sue them for the damages!
An older friend had the same situation with poachers on his place. He solved the problem by leasing his property, for hunting, to just one hunter. He checked him out and got references. By doing that he knew how many deer that one hunter would take, which was far fewer than poachers. The hunter did all the work to catch the poachers on "his" lease. The friend also made a little money for the lease.
hey mate im a young cattle farmer in australia on a cattle station and i gotta say this is a cool trick, normally we just use fence strainers but will give this a go
Been using this trick for a while. This guy really makes it look easy (if its the first time it really is not that easy), but once you do it a dozen or so times it becomes easier and you can go faster.
Looks like unraveling the spliced wire from the hammer without losing tension is the trickiest part of the procedure, might take a few failed tries but thanks for the tip. I too am a non rancher, but always good to learn new things.
Great trick when you don't have your strainers handy. We used a Hayes brand of Fence Strainer, very simple and effective also, but nothing wrong with a handy trick like this when you don't have everything you need, thanks for sharing.
Damn, I have not seen that method used since my dad taught me 70 years ago. As I recall, we doubled the splice wire and only used the hammer on one strand so the other strand could easily be folded back and twisted. Then the hammer could be easily unwound and that strand also twisted around the spice wire.
I thought I was going to learn something useful but I don't use barbed wire, only electric fence. Very good and useful video for others though. I liked this guy so it wasn't a waste of my time.
That's a great tip! Here's one that helped me: Get some compound diagonal cutters. Cuts through double strand like butter. My forearms actually got smaller after I bought one, it's amazing how much force you have to use to cut wire.
I'm not a rancher. I have no barbed wire fencing around my house. I will never use this little trick that you're showing here. But I still watched this whole video just to know how to do it. TH-cam has taught me so many things that I will never use 😂
@@greenerpasturesranchingltd7621 Congratulations on the number of views! 3.5K subscribers and you have 840K views on this video in 11 days. That is crazy! Good luck to you and your channel. Both of my kids have channels too. My son's channel is more popular than my daughter's, with 16K subscribers, but his highest viewed video is 312K views. Keep up the great work.
We used to loop and get as much out as possible and then put something smooth metal between like a piece of conduit and turn that until tight then back off 1/4 and slide out. I like this trick and will try this next time. Never too late to try something new
I used to do what you described with 14 gauge wire. You can twist it with the handle of your cutters or a screwdriver. To me, it seems quicker than the hammer trick. Plus, If what you're using to twist has a taper, then you don't even need to back it off to get your tool out.
Been doing this for many many years. Yes the loop ends are sharply bent and weaknd but usually the fence is old and weak anyway. Otherwise would not need fixing. Actually used this method just yesterday.
That is ingenious! I would have gone for a fence stretcher instead but they are much more cumbersome than a hammer and still leave a bit of slack. Thanks, I'll be using that technique on my next fencing project.
Yep! Used that when I walked fence for way too many sections of field at my uncle's cattle ranch 30 years ago. Only difference was usually using fence pliers instead of a hammer.
Taught by my uncle back in '61 (after Carla hit) and sent out to repair "several" breaks. And yes, he inspected the first 20. Paid me a $ for each one and trusted me for the other 25. Whole lot of money for a 10 year old 😅
Nice job! Seems like you could tie off that final loop with the hammer, too. After lifting and rolling back, instead of removing the hammer, take a couple turns around the standing wire to lock it off. Then remove the hammer. Less chance of losing the tension, less direct hand-to-wire contact, etc. Regardless, nice technique, and thanks for sharing.
That very last sentence is a huge reason for the problems in this world. We need dads, not youtube. What's really sad is so many youths are watching youtube instead of learning something from their dad
It’s always great when the algorithm brings you to a small channel with a viral video. Great tip you have there friend. Wishing you best of luck with your channel and hope to see it grow like a canola field in July. Subscribed and following in Manitoba!! 🇨🇦🙏
Lee Valley Tools sells a kit that uses the same principle to make hose clamps. When done right, the result is a clamping effect that's smooth and pleasing to the eye , and when wrapped with tape is almost invisible.
The “clamp tite” wire tool. I repaired a 12lb sledgehammer handle with three DOUBLED bindings, and some hockey tape. We used that hammer for another three months before the handle broke again in another spot. The manufacturer (not Lee Valley) sells versions of that tool that will tension up to .250” wire.
My dad taught me to start with the top strand because if you start with the bottom strands the top strands will get tangled up with the bottom strands.
Thanks for this video, my father taught me how to do this around 1965. I have used it untold times while running 1000 head a year of stocker/feeders............
It never ceases to amaze me that the older I get, the smarter my dad becomes.
Well done.
Well said
A supposed Mark Twain quote: When I was a boy of 14, my father was so ignorant I could hardly stand to have the old man around. But when I got to be 21, I was astonished at how much the old man had learned in seven years.
I don't think I realized this until I was almost 30. That old man worked my tail off before I went off to college and got drafted.
I always say… the times I miss my dad most, are those times when (if he were still here) I would turn to him and tell him he had been right about one thing or another.
You need more close ups off what your exactly doing!
71 years old and learned a great trick before breakfast. THANKS!
DITTO
@@industrialathlete6096 me too! only now I dont have any fences haha
Our pleasure!
I'm 72 and didn't know this. He had a good dad and teacher. And looks like his dad had a good student.
44 and same boat. Still feelin just as old, haha!
This right here, is why youtube is handy,
clear video example, no fluff, to the point
I don't have a ranch and I have never worked with barbed wire - and unlikely will ever do so - but I still watched this from start to finish. 😂
Thank you sir.
Still can use it for any other wire and some extent on string too. One i have been using is the bow saw tightening method with stick and two strings being rotated, but this seems far better in that extent. Could maybe even use it to create pull on smaller tree if you dont have ratchet strap or dedicated felling tools around.
@@Hellsong89 Great points! Thanks buddy. :)
You’ve learned something, it is applicable to other situations. Try it next time you see the opportunity! Shalam
Same here. I'm in Chicago..😂
Same
I fix fence all the time and was very excited to see this, can't wait to try it out.
Instructions unclear, I now own 47 hammers and 46 of them are stuck in my fence.
😂😂😂
You've just made a hanger system for your tools! The next step is to build a shelter so they don't get wet...
Hammer-barb fence
Look at the bright side, Any rogue hordes of nails will think twice about crossing your perimeter 🤷🏼♂️
🤣🤣🤣
This is such a cool trick! I used to do something similar with pliers but I just couldn't get it out in the same smooth way. Hammer saves the day, once again.
Glad you liked it!
I have, at present, no practical need for this information. And yet, im glad i watched. Something to file away, just in case. Excellent video.
My thoughts exactly.
You never know.
Glad it was helpful!
This is the type of content that I've always thought makes TH-cam special.
He feiled to mention something important....being of the right side of the repair. Or you have to climb trough the fence to get bck to your truck...
Agreed.. use to be.. now yt thinks I wanna watch crap mainly. Glad this came back up though
I’m 74, lived on a farm growing up and helped my uncle run fencing for the cow pastures. We used stretchers to tighten wires but I never saw this trick before. Pretty slick
You can be ignorant at any age. Never used a clamper before?
@@AFMR0420We are all ignorant in some areas. Understanding this is surely part of wisdom.
Me too!!!
If everyone already knew everything, there’d be no use for “how to” anything.
@@AFMR0420
Good demo. I'm 86 and been stretching barb wire this way for a looooong time.
Hi Det, how is Barb doing? Still feeding the maggots?
Thats good, these damn 20 year olds now probably are too scared to get sweaty or dirty. You probably put more work in per day at 86 than the average 20 year old does in a week.
This method was used before God's dog died using sticks ... without a tool bag new hammer new pliers & never used gloves ...
lol im a townie with no real need for this knowledge but for whatever reason i found this really satisfying to watch
I’m 70 and you taught me something new today. Thank you.
I'm 69. Eeeehhh.
Me too.
68 here in East Texas. Easier than a come-a-long on small project.
Same here 74, I don't work with barbed wire a lot, but I like videos like this . We can learn a lot from our dads, if they will take the time & we will listen and pay attention.
Done it with a hammer, modified fence pliers and home made t handles. The wrapping trick is the key and your explanation was excellent. Some will say it weakens the wire but then again doesn't everything. Years of mending fence says this works very well.
Excellent!
Use the correct tool once you will be amazed.😂
Agreed. Weakened wire is better than a hole. You have to be practical when you have livestock, that you don't want roaming. This is a fast and efficient way to repair a fence with minimal tools. If someone is stuck on one particular way they can always come back later and re-do it.
@AL4N. Yes, but sometimes you dont have those tools
Jake’ wire tighteners. Far quicker and easier. This is a good trick if you are in a pinch, but I keep 50 of the Jake’s around.
I love that he’s handing down knowledge that his father showed him. The older you get the more you realise what a privilege it is to have things like this to draw on from people you care about and to be able to share that knowledge with others 🙌💕
This is what a clamper does. E clampus vitas.
🤠👍
I aint a rancher but I do like watching people being clever, this is awesome! Never would have thought it in a million years.
🤠👍
an original idea? Love seeing original fixer-up ideas
This method my grand father used back in the 1920s on the ranch and I always did it this way neat to see you showing it. It is the best way wire won’t slip back.
Thanks for sharing
I'm 57 years old and know absolutely nothing about barbed wire fence, but I can offer another great tip... next time tell your camera guy to GET CLOSER !!!
Ha!
Thinking same
The second demonstration can't get any closer...are you people blind?
That’s why you need the camera closer….
He’s probably using a camera pod that’s why it’s far away
Very nice! Thanks for sharing! After I get the splice done I usually just bite a piece anywhere down the length between the posts in question, and twist my lineman pliers (I think the tool is actually called a fence multi-tool pliers, but look a lot like lineman pliers), and make a "fold" or a "Z bend" then I can crimp it shut to flat. This can be done anywhere on the line, but they will occasionally cause the old, crappy, rust fence, that we've adopted on our 24 acre property, to break clean at the crimp point. I think your spice system might be a bit better, since I can use the mechanical advantage of the twisting with the hammer to get tension back to the next barb on both sides, thus avoiding the weak point(s) that I'm creating down the length of the fence.
Cool idea, and thanks!
Some many “amazing” technique videos on TH-cam are a complete waste of time / impractical. It is lovely to finally find one that is so useful, thank you.
Glad it was helpful!
No more buying strainers for me thanks to your method, definitely going to save me money Thank you for sharing.
Glad to help
I learned that trick working on a cattle ranch in Southern Colorado about 45 years ago. Thanks for sharing so others could learn.
Its really good you shot a video about essentially tying knots from 25 feet away. Good job!
Do you people even watch full videos? He literally does it zoomed in later in the video...People have the brain capacity of a gnat...
I'm 72 but a newby to fence fixin and have been trying to use a fence stretcher to tighten up the fence I built a few yesrs ago, just me & my tractor. Now THIS method looks much more affective! Thank you!
Good luck!
Dear GPRL I am 75 and that was an excellent way to tighten a Wire fence with simple tools that you could easily store in your Ute Permanently!! I had to laugh at the guy who said he had 46 Hammers suck in his fencing!!!
Yes. All sorts of keyboard warriors on here. Lol.
@@greenerpasturesranchingltd7621 You did a good job with your video. D you have other videos in mind?
i'm not a rancher. i've never messed with barb wire. this just seems to be one of those 'nifty' tricks that is good to know. good job showing how to pull through the loop and then how to roll the hammer back over the loop to lock it in. this was cool. nice video.
I’m 143 years old and i learned something new today
How many days is that?
@@AFMR0420 that's 52,195 days not including leap years
Lol I'm 144. Get out of here youth.
I got ya beat. I'm three days older than God's dog. 😅
I am god’s dog 🤔
I've been looking at a broken stretch of barb wire for 6 months but didn't have anyway to make a repair tight. I'm just back from fixing that annoying piece of wire. Great hack.
🤠👍
You get fewer gouges on the forearms if you start on the lowest wire first.
This is an experienced barbed wire fixer....
@@montanawarren8462 Remember..technique demonstration, not application.. illustration purposes(and possibly saving the cameraperson's back..if they arent 3-4' tall kid..), show the top wire, so viewer can see clearly, and also so instructor shows a more "relaxed' working pose..
Instruction has 3 distinct parts: demonstration, student learning, and application..
Someone else's Dad taught me to see the bigger picture, & to not keep it to myself..
@@francisconti9085 What a load of pony. You just don't like the fact the dude is much smarter then you.
@@jbuckley2546 ? You got ponies to clean up after I guess..was a neutral comment, not trying to one up anyone..but seems you need more attention than how life lessons work..
@@jbuckley2546 ..Just curious , if you have ever heard of a tool called a field expedient..it's kinda like a Swiss army knife in a way.. ("thistle" give us all a laugh!)
Really nice tip! If anyone of cutting multiple pieces of wire, I suggest larger cutters. the amount of hand pressure you see here puts your nerves in danger. I ended up with carpel tunnel from using the wrong tool, and it took a couple of years to recover fully. I don't want anyone else to go through that.
Getting the wire tight by hand is never enough. I'll be using this trick. Thank you and your dad.
I moved onto a remote 1883 farm with about all the skills of first visiting my uncle's dairy farm as a kid. What a learning curve just for basics! I've almost got coiling down but nothing close to the stunning tight coils of those before me. Learned I had made a hash on DIY tightening as the elderly owner came out and slung around a heavy "goldenrod" like a maestro and schooled me right.
Also very impressed with an old fencing wagon that was abandoned and melted into the grass. Tripped over metal and recovered 4 pre-1900 iron straighteners I thought were some kind of steampunk industrial come-alongs. Holy hell, how did they even LIFT those things much less WORK them? Good tip. 5,765 more lessons to go to just attain greenhorn status.
Wow, I don't have anything to do with fences, but I believe this could come in handy for many other applications. It's one of those tricks you want in your bag of tricks. Especially when SHTF. Thanks for sharing.
This is really cool.. I could have used this when I was still a city slicker learning all the "fun" things with keeping up the property... Earned a stripe or two quite a time ago, but not without of blood, sweat and hazing from relatives and locals.. Yeah, know your wire! I popped a few older older tensioning while repairing.. That can sting you if you push the old ones bast the limit.. I got bit.. Twice.. Anyway... There was no TH-cam back then but this is great info! Thank you for sharing!
I've been using 2 screwdrivers as a windlass, but I love how you use the hammer. Very clever, and thank you for sharing.
A so turning the wire around the handle of the one screw driver and using usually there is hole for hanging it on the wall, but you put second driver trough it to increase leverage, the pulling back using rest of the handle and another end? Sounds pretty good actually, except slight torture for the tools. No thank you for sharing, didnt consider this and now its on my mental tool bag.
Very welcome!
I've never thought of using a hammer as a winch before. Thanks for sharing.
No problem 👍
There are tricks to every trade, thank you, this is a great idea. We’re from Missouri, the show me state. Appreciate your efforts to make the video to show us how it’s done.
Readily useful info! Thank you! I may just go back to my shoddy splices and tone them up now. It's hammer time... 🔨
Rock on!
It would be interesting to know the history of some of these tactics. I am 51. My dad showed me this and I am sure his dad showed him. I am 51. From Alberta, Canada. Thanks
64 my dad showed me this 50 years ago. He was from Texas.
You need to force metal rod into wood to tie two peaces together=rock, nah it does work but might hit your hand between so lets add a handle=stone axe if sharpened peace is added and hammer otherwise. Well now i need to remove it to salvage nail since those are extremely valuable at the time. Well cant pull it or hit it out effectively.. perhaps something that goes around the nail back end= peace of metal with slot in the middle. Hey lets add this to hammer so it can both remove and install nails and lets make it from metal! Ou there is not much force to pull the nail, not enough leverage, lets add this bend on the puller side for that=more of less modern hammer. Then someone needed to tighten wire and realized you need more leverage, had seen how pulleys and hoists worked to decided to use hammer head as a pulley and use handle as leverage since that was all he had around that the time.
Something like that in short form is probably what happened.
@@mattbrown837 I've done this to tighten wire because, being a girl, I'd only ever been told to "stay back in case the wire breaks" instead of being taught how TO do such things. (Glad to know I wouldn't have been laughed at for my figure-it-out fix.)
@@dawnmcr802women should be protected from injury. They bring forth more of us. Protecting those that bring life is good.
@@Hellsong89 huh? what you on?
I don't have a ranch, farm or do anything that involves fences, but I watched the whole video and it was very entertaining ..... cheers from Mexico
That is why you dont have a ranch!!
@@thefamily512 right, I own commercial buildings, I don't need to know how to fix barb wire...
Nice Demo Kevin - great content. I no longer live on a ranch, but that is great information.
Lowell
Thanks for watching!
I learned this hack way back in 1978. My Dad taught us all how to splice barb-wire fences that were damaged/broke/cut. This is the first time I've seen it demonstrated.
Surely in 1978 it would have been a tip.
"Hack" didn't seem to besmirch the English language until about 5 yeard ago.
@@ianmacfarlane1241 "Life hack" has been coined for 2 decades
@@ianmacfarlane1241 considering that coding goes back into the 80s (Apple 2c is 77) at least I think you just weren't the crowd for it
@@ianmacfarlane1241 Also just looked at it apparently in 1955 MIT nerds were using the term... so maybe you need to research before just commenting random stuff
@@tristancoffin Ah, another smartarse - must be something in the air.
I obviously wasn't talking about the term "hack" being used in the World of computing, unless you see fence repair as being part of the computing sphere.
I was talking about "hack" being used as a substitute for "tip" throughout the general population - decorating hacks, baking hacks, gardening hacks, cleaning your bathroom hacks, homesteading hacks etc etc.
None of these have anything to do with the computing World.
"Hack" meaning tip only entered general usage a few years ago, even if, decades ago, it was used in a different context in the coding World.
Next time you want to shoot someone down over an Innocent comment, it'd probably be a good idea to engage your brain first.
I may never need to know how to do this, but it's cool that you've shared this trick.
Thank you, for sharing your Dad’s great information on splicing barbed wire fencing back together. My wife and I inherited the small family farm. We are dealing with unscrupulous hunters that cut the wire to poach our deer and other animals that we have posted no hunting on our property. I need to repair the fencing that they cut, I really appreciate the tip that you have demonstrated in your video that your dad taught you, it is great. Thank you, and I really appreciate it very much and glad that your dad took his time and his patience to teach his skill onto you so that you could pass it on also.
We will keep sharing the knowledge.
As a hunter, I would say… Put up some hidden trail cams, and then turn in the poachers (so they will never get a license again)! And sue them for the damages!
easy fix. I.E.D's
Eye e dees
An older friend had the same situation with poachers on his place. He solved the problem by leasing his property, for hunting, to just one hunter. He checked him out and got references. By doing that he knew how many deer that one hunter would take, which was far fewer than poachers. The hunter did all the work to catch the poachers on "his" lease. The friend also made a little money for the lease.
hey mate im a young cattle farmer in australia on a cattle station and i gotta say this is a cool trick, normally we just use fence strainers but will give this a go
🤠👍
I don't farm or ranch, even though i would love to. I really like learning tricks like this to help with certain situations 👌. Too notch material!
Been using this trick for a while. This guy really makes it look easy (if its the first time it really is not that easy), but once you do it a dozen or so times it becomes easier and you can go faster.
🤠👍
As soon as I heard the accent I knew I was going to see something new to me. Great trick, howdy from West Texas.
Looks like unraveling the spliced wire from the hammer without losing tension is the trickiest part of the procedure, might take a few failed tries but thanks for the tip. I too am a non rancher, but always good to learn new things.
You are correct
Thank you for a clear and concise tip.
You're welcome!
I don’t own a ranch or ever work with barb wire, but I still enjoyed the video and maybe I will be in a bind someday that this will get me out of.
Uncle Ben taught us this. My brother learned it but I forget it every time. Nice job explaining,I’ll try learning again.
You can do it!
All I learned from uncle be is that with great power comes great responsibility.
Thank you so much for your quality tips. Im a rookie learning with little guidance and patching or fixing loose fencing always leaves me unsatisfied
Glad to help
great hammer trick,,,,ive spliced many broken fences,,,bit iam an old timer and love learning new tricks
Glad you enjoyed it
Great trick when you don't have your strainers handy. We used a Hayes brand of Fence Strainer, very simple and effective also, but nothing wrong with a handy trick like this when you don't have everything you need, thanks for sharing.
Damn, I have not seen that method used since my dad taught me 70 years ago. As I recall, we doubled the splice wire and only used the hammer on one strand so the other strand could easily be folded back and twisted. Then the hammer could be easily unwound and that strand also twisted around the spice wire.
I thought I was going to learn something useful but I don't use barbed wire, only electric fence.
Very good and useful video for others though. I liked this guy so it wasn't a waste of my time.
🤠👍
I learned that 45 yrs ago . Shocked many people when I did it
They all asked me how can I get the fence tightened lol 😂
It's not electric --- HAHA
Yeah, they probably wanted to do it the hard way and waste time.
Neighbors' cows and my horses and donkeys keep me busy. Nice video. Thanks.
Thanks for watching!
I learned this trick at nine years old from my nine year old cousin in 1969 when I spent the summer on his families’ Iowa farm.
I'm a city girl but for whatever reason I've been binging these kind of videos.
That's a great tip! Here's one that helped me: Get some compound diagonal cutters. Cuts through double strand like butter. My forearms actually got smaller after I bought one, it's amazing how much force you have to use to cut wire.
Great tip!
I'm not a rancher. I have no barbed wire fencing around my house. I will never use this little trick that you're showing here. But I still watched this whole video just to know how to do it. TH-cam has taught me so many things that I will never use 😂
Excellent!
@@greenerpasturesranchingltd7621 Congratulations on the number of views! 3.5K subscribers and you have 840K views on this video in 11 days. That is crazy! Good luck to you and your channel. Both of my kids have channels too. My son's channel is more popular than my daughter's, with 16K subscribers, but his highest viewed video is 312K views. Keep up the great work.
😊hey Neat Trick !!!!! I’m going to use it . I’m always having to fix my fence. Thank you so much & God bless you
You are so welcome
Slicker than snot on a door knob! Thanks for the video!!
Thanks for watching!
Good fence fixing hack explained very well! May have to practice it a couple of times . Thanks for posting it .
Glad it was helpful!
Thanks! I was wondering how to fix my fence without a bunch of wire and effort. Now I can splice the breaks back together before it gets hot here.
Glad I could help!
We used to loop and get as much out as possible and then put something smooth metal between like a piece of conduit and turn that until tight then back off 1/4 and slide out. I like this trick and will try this next time. Never too late to try something new
I used to do what you described with 14 gauge wire. You can twist it with the handle of your cutters or a screwdriver. To me, it seems quicker than the hammer trick. Plus, If what you're using to twist has a taper, then you don't even need to back it off to get your tool out.
Good on you for passing down the technique!
Thank you!
Been doing this for many many years. Yes the loop ends are sharply bent and weaknd but usually the fence is old and weak anyway. Otherwise would not need fixing. Actually used this method just yesterday.
Nice clear instructions 👍
Thanks I'll keep this in my mental storage for later on
🤠👍
That is ingenious! I would have gone for a fence stretcher instead but they are much more cumbersome than a hammer and still leave a bit of slack. Thanks, I'll be using that technique on my next fencing project.
I'll never buy a fence stretcher. They end up rusting out in 2 years.
Yep! Used that when I walked fence for way too many sections of field at my uncle's cattle ranch 30 years ago. Only difference was usually using fence pliers instead of a hammer.
Was that one of the intended uses of that tool? Love the generational knowledge.
Core memory unlocked. My dad taught me this when I was in high school.
Taught by my uncle back in '61 (after Carla hit) and sent out to repair "several" breaks. And yes, he inspected the first 20. Paid me a $ for each one and trusted me for the other 25. Whole lot of money for a 10 year old 😅
Good stuff! Useful method for similar stuff too, electric fences etc
Definitely!
Nice job! Seems like you could tie off that final loop with the hammer, too. After lifting and rolling back, instead of removing the hammer, take a couple turns around the standing wire to lock it off. Then remove the hammer. Less chance of losing the tension, less direct hand-to-wire contact, etc.
Regardless, nice technique, and thanks for sharing.
Good tip!
I only clicked because I miss working on a ranch from when I was a teenager. Definitely a good tip. Now instead of dads, we have youtube.
That very last sentence is a huge reason for the problems in this world. We need dads, not youtube. What's really sad is so many youths are watching youtube instead of learning something from their dad
Why am I watching this? I don’t even own a ranch
Ahhh! But you want to own a ranch after watching this! Subdivisions are so boring, once you leave the city, you will never go back.
@@coloradogirl9913so we can keep the cowboy in us, alive! Lol. (No ranch here either, and I'm a girl. But love these
Very nice. Exactly what I needed. Found a tree that fell on a fence over the winter.
Perfect!
Get yourself down to Texas and show the National Guard this trick!
Mexico paid for a wall that 45 had put up from Calif to near Browsville Tx . I bet you forgot that ,right ?
That is hilarious but sad at the same time
I'll be happy to head down there. 😂
Yeah, and add a 2nd wire too!
They know how....they just don't
It’s always great when the algorithm brings you to a small channel with a viral video. Great tip you have there friend. Wishing you best of luck with your channel and hope to see it grow like a canola field in July. Subscribed and following in Manitoba!!
🇨🇦🙏
Our main social media is Facebook. Working on the TH-cam side. Greener Pastures Ranching.
Lee Valley Tools sells a kit that uses the same principle to make hose clamps. When done right, the result is a clamping effect that's smooth and pleasing to the eye , and when wrapped with tape is almost invisible.
The “clamp tite” wire tool. I repaired a 12lb sledgehammer handle with three DOUBLED bindings, and some hockey tape. We used that hammer for another three months before the handle broke again in another spot.
The manufacturer (not Lee Valley) sells versions of that tool that will tension up to .250” wire.
I bought one of those and have used it several times. Great for when you don't want bumps in the hose, like one you roll on a hose reel.
That’s a great method/technique. Thanks for posting
Thanks for watching!
It doesn't take too many times before you learn to do the bottom first and work your way up.
Love THAT ! No nonsense!
Straightforward
“ field “ genius !
Excellent. Pick up the cut ends and start with the Bottom Strand in a real situation.
My dad taught me to start with the top strand because if you start with the bottom strands the top strands will get tangled up with the bottom strands.
I guess that is possible. My thought is that it could be painful working beneath taut barbed wire.@@hillsidefarmer6762
@hillsidefarmer662 My Dad taught me to always start with the top wire ,if you don't by the time you get to it, your other wires will be become loose.
Hmmmmmmmm. So then the Top Wire will become loose? Always more that one way to do things. @@davidgregg2778
Really good stuff! Quick work, thanks Dad!
Glad you liked it!
Thanks buddy all my hammers are now stuck in my fence haha
I see a lot of sticks incorporated into splices. 😆 🤣
That would be my luck too😅
Better watch again, took me several tries years ago 😂
Watch it all the way through. Lol
You clearly need more hammers.
My Dad taught me the same thing. He could make a splice without a loop that worked on 12ga barb wire as good as anything ever made.
Nice trick. In our country "barbless barbwire" is called smooth wire.
Ok. Hey Billy go back to the barn and get some wire. Billy: You want barbed wire or smooth wire? Understand now Billy??@@williamsharp2532
In my country the [Gates] of h3ll is buying up all the grazing land.
It's actually called barbless barbwire when I have to order it. 🤠👍
Great trick. You can also do it with Fencing Pliers.
Great video, great idea ! Thank you !
Glad you liked it!
This will come in handy, love it. Thank you!
Glad it was helpful!
Your video needed to be zoomed in when you inserted the hammer.
Must of viewed it on your (not so) smart phone.
Thanks for this video, my father taught me how to do this around 1965. I have used it untold times while running 1000 head a year
of stocker/feeders............
Yes. It works great. There are quite a few nay sayers. Lol
Nice trick. I don't mess with BW, but there might be other opportunities to use this idea. Thanks for sharing!
Thanks for watching!