А мне понравилось! Этот мужик вообще ничего не боится, делает как знает. Руль на 3d принтере и куски рессоры вообще шедеврально 💥. Забавно, что эта штука ездит 💪. Автору респект и новых проектов на фоне красивой природы 👍👋💯
I watch a lot of these type videos b/c these folks are far more than mechanics..... lol, it's in their artistic ability that comes to the surface & I like seeing how they solve different aspects of the build along w/ the fabrication of the piping. It's kool to see!
Great work my guy, killing me with the Bike levers for acceleration and braking. I'm sure with your skills you could fabricate your traditional gas and brake pedals. Keep up the good work though, one of the best builds thus far.
You have to be one of the best recyclers on the tube, I am constantly complaining that I don’t have enough stuff to make another project and you can turn one into another at will 😀🤟🏻 I applaud your dedication and effort and look forward to your next mobile steel coffin😊
I like everything about this build, especially the frame is very protective in case of a rollover. But he didn't try to overpower it with too much engine.🎉
Nice work,I probably put this in my list to do.I do make like this without motor self power to my daughters before long time ago,maybe it’s time to make like this anyway all I need is old motorcycle and used wheels.thanks for the video
Man I like it don’t take me wrong but it’s so disappointing if you did all that monster work what kept you from making it a tiny bit bigger and put a bigger engine since I’m sure skills isn’t an issue you can find some 750 800 cc motorcycle engine all day long, anyways great build
Yeah he couldve added a better engine because this engine i believe wont even push out 30km/h so at this point the spring choice was very expensive too he could have went with rigid type axle suspension
Oh yeah? Well Pete if you are such a critic, then show us what you can do? Starting with my buggy frame, when you finished it I'll judge you, lol. Listen if everyone on YT was a goat welder, the majority would be too discouraged to have a go and then never get better or even have completed something of their own. Welding isn't my strongest skill, as a qualified Mech I wonder if it's okay for boiler makers to driver around with poorly tuned engines or malaligned suspension goemetry, or should we pull them up about it? lol.
damn fine lookin buggy :). everything looks fine, but is the enough space to seat comfortably even with motocross helmet on? because i wouldnt ride around without a helmet ... what kind of engine is that? looks like aircooled, or you just didnt installed radiator yet?
Hi and good morning my friend please how long and wide is that car you made and the size of the tyre,I really like it a lot and I also want to do the same.Is very nice and beautiful
И не зря. Как мне кажется, тут ещё плохо настроен развал схождения, из-за чего повороты будут ещё труднее. А то, что отсутствует дифферинциал, то это иногда наоборот помогает преодолеть бездорожье из-за отсутствия механических потерь и неверного перераспределения нагрузки колёс
А мне понравилось! Этот мужик вообще ничего не боится, делает как знает. Руль на 3d принтере и куски рессоры вообще шедеврально 💥. Забавно, что эта штука ездит 💪. Автору респект и новых проектов на фоне красивой природы 👍👋💯
I watch a lot of these type videos b/c these folks are far more than mechanics..... lol, it's in their artistic ability that comes to
the surface & I like seeing how they solve different aspects of the build along w/ the fabrication of the piping. It's kool to see!
😂
Great work my guy, killing me with the Bike levers for acceleration and braking. I'm sure with your skills you could fabricate your traditional gas and brake pedals. Keep up the good work though, one of the best builds thus far.
I dub thee the King of Integration By Parts. Long Live The King of Parts.
Huzzah!
You have to be one of the best recyclers on the tube, I am constantly complaining that I don’t have enough stuff to make another project and you can turn one into another at will 😀🤟🏻 I applaud your dedication and effort and look forward to your next mobile steel coffin😊
Wow, thanks!
m Ⅷなわ@@CHERALAUTO
@@CHERALAUTOWhat size pipe size does the chassis use, boss?
@ 40 mm
Another really good project sir. Thankyou for sharing.
Very nice work. Looks great. How many cc is the engine? Also what is the diameter of rear shaft? Thankyou
Вал наверно на 17мм.
Good work my friend, keep up the creativity❤💪
I love your build , very nice very talented , very good .
Thank you very much!
I like everything about this build, especially the frame is very protective in case of a rollover. But he didn't try to overpower it with too much engine.🎉
Parabéns meu amigo ficou top!!!
I remember the days coming home covered in grit! It felt good LoL
26:23 Is the back core solid or hollow and how many mm?
Great Work ✌️👍🇱🇷
Thanks ✌
1:00Road is all messed up. Is that Calmexifornia?
Amigo como esta excelente trabajo podría compartir los plano me quiero hacer uno
Nice work,I probably put this in my list to do.I do make like this without motor self power to my daughters before long time ago,maybe it’s time to make like this anyway all I need is old motorcycle and used wheels.thanks for the video
Your daughters are lucky to have you as a father, I'm working towards being a engineer as I love anything to do with combustion/ electrical
You have an amazing imagination. Bravo! But how can you drive an unregistered vehicle on public roads?
Fun to watch but reminds me of the guy who built his own helicopter 😢
What happened to him? Im thinking to build my own helicopter.
Boa tarde! Qual as medidas desse chassi?
Yeah so sad for him because the propeller hit him in his head and he died instantly.. And he's from inda😢
F
That why safety is important...that boy not wearing any safety...
Muito bom irmao parabéns tambem estou pensando em fazer um pra me divertir
Hi, I really enjoy your video but I have a question. How do you manage with the clutch? Thank you and once again wp for your video.
doesn't the rear axle move sideways, left or right? doesn't slide off?. I always have problems with that...
Are the holes in the welds for ventilation? Do they make it go faster?
Amazing work!!
Thanks a lot!
Man I like it don’t take me wrong but it’s so disappointing if you did all that monster work what kept you from making it a tiny bit bigger and put a bigger engine since I’m sure skills isn’t an issue you can find some 750 800 cc motorcycle engine all day long, anyways great build
Yeah he couldve added a better engine because this engine i believe wont even push out 30km/h so at this point the spring choice was very expensive too he could have went with rigid type axle suspension
Maybe he is building for his toddler son, (safety purposes) lol
@Cheral auto how about chain? does it nof falls off?????
you should check the front suspension bro
Why what's wrong with it 😕
@@rockman49er in my opinion, the stand geometry is a little bit low
😮😍😍esta chidoo!! Solo que le falta mas velocidad .o fuerza pa dos pasajeros
Я тоже так думаю. Я бы добавил редуктор. Больше момент и + задняя скорость 👆
Beleza muito bom 👍👍👏👏
Hi, excuse me, where can I get the plans for 3D printing of the steering wheel?
Some of that welding needs looking at mate , great creativity though
Oh yeah? Well Pete if you are such a critic, then show us what you can do? Starting with my buggy frame, when you finished it I'll judge you, lol. Listen if everyone on YT was a goat welder, the majority would be too discouraged to have a go and then never get better or even have completed something of their own. Welding isn't my strongest skill, as a qualified Mech I wonder if it's okay for boiler makers to driver around with poorly tuned engines or malaligned suspension goemetry, or should we pull them up about it? lol.
Parádní vozítko, dobrá práce.
Did this guy use a tube instead of a bar for rear axle? How didn't it bend?
Brilliant sir !!!
Good job, brother. ❤
Dude, this thing has massive understeer and how much power??
Waiting for that axle to bent..lol. Looks like fun though.
Bad ass!! Do you have measurements to build my own
Be
My favorite car❤❤
damn fine lookin buggy :). everything looks fine, but is the enough space to seat comfortably even with motocross helmet on? because i wouldnt ride around without a helmet ... what kind of engine is that? looks like aircooled, or you just didnt installed radiator yet?
Nice love it ❤😊
Hi and good morning my friend please how long and wide is that car you made and the size of the tyre,I really like it a lot and I also want to do the same.Is very nice and beautiful
Well done bro did u just made that in 2 days .?
the wheels are oriented in all directions😂😂😂😂
Am on a project my self can I ask you something '''?what's the lent of the base pipe
I’m not a welder and can’t find anywhere you can buy cross kart frames already assembled.
I believe you could polish up you welding results with a mid-range mig welder, better suited for the types of projects your producing. Good luck !
Parabéns pelo seu trabalho muito bom mesmo villl gostei você é muito criativo parabéns ❤❤❤❤
the best venihcle feom all of yours!! great! can u make F1 replica car :)? f1 gokart something like that
Cool idea!
How much did this whole shop cost you? ❤❤
not sure how long those welds will hold up when he gets it off-road,
Great project
Nice one Sir
Excellent 👌 😎
Супер! Мастер от бога. Класс!
how long did it take pls!
How can I prepare a plan to build this car??
good job ❤
Brother, how many cc is the engine?
179-200
Love it but one thing that would drive me crazy is alignment. It's crabwalking pretty hard!
Needs some better brakes as well
This man has never owned a measuring tape in his life lol
Where are you at? I notice lots of damaged buildings on your drive..
USA. It's is normal road 😁
Muito top 👏
What is the length of the chassis frame please
Inspiring!
Good job 👏👏👏👏👏❤❤❤❤
Super nice
That stick welding looks easier than flux core to me wow have to try this
What's the cage and diameter of round pipes ?
Bravo ❤
A little bigger engine and you'll be revving on the circuits 👍🏼
muito top! vc teria o projeto pra vender?
Like how simple it is
I enjoyed this video do you have a blue print for the cart i would like to build it
Bom trabalho..mas o pneu suplente não devia ser igual ao outros...?
Ахах 😁
Крутой аппарат 🎉🎉🎉🎉🎉🎉🎉🎉🎉
Next time, make a toaster with a blender attached to the handle. It will be faster. Cool design though.
mantap bang
Keren
Hola buenas noches las haces para vender
do you have a plan of this?
saludo buenas quiero saber como se llama ese programa que usas para esa impresora 3d gracias
Mantap banget harga berapa👍👍👍👍👍❤️❤️❤️❤️🇮🇩🤝
Good work br
looks good im just not sure why but everytime i see a four wheel with no differential it kinda annoys me for no reason
И не зря. Как мне кажется, тут ещё плохо настроен развал схождения, из-за чего повороты будут ещё труднее. А то, что отсутствует дифферинциал, то это иногда наоборот помогает преодолеть бездорожье из-за отсутствия механических потерь и неверного перераспределения нагрузки колёс
I think it needs a bigger engine 🤔, it's still a nice build
How many HP is the engine?
Una suspension un poco mas reforzada y a colocarle un 600cc y a volar 😈😈 esta genial el proyecto
*لماذا لم تستخدم الموقف طيلة تجوالك حتى نهاية التصوير عندما أحترق المحرك حينها توقفت لوحدها* 🤔
Guys can anyone tell me where can i get this type of wheel assembly??
Hello, what is the weight of the crosskart
차가 안나가네요. 서스펜션하고,샤우드 로 하며 체인은 50센치 미만으로 하면 잘나갑니다. 뒤에 쇼바도 2개설치 하세요.고생하셨어요~
диаметр , толщина , марка труб , размеры ? масса рамы ?
Но это уже на твой вкус и усмотрение....
Unlce can you tell how much want make this car
Those welds are not legal 😢😢😢. But good job 💪
Moves good for having a scooter engine 😂
App bhohot gadiya banatehi lekin alag parts kew nahi use karte ho aki parts ko kew use karte ho parts nikalthiya eska gadika Kya huva sir
those axles are unsupported at the wheels
- going to bend going over forst major bump - front suspension linkage/steering just as sketchy
Ótimo trabalho, mas eu não andava nesse carro não oh, chassi tem formato de caixão irmão.
Good afternoon, do you have a technique like ours?
Hi bro ,Can you please tell me all the sizes of the parts, thank you
Top
is chain not falling off ???
Hola crees q nos pueda pasar los planos?