Testing micro Hydro power turbine Ac output?
ฝัง
- เผยแพร่เมื่อ 28 ธ.ค. 2016
- rover.ebay.com/rover/1/705-53...
rover.ebay.com/rover/1/705-53...
small hydro power generator picked up out of china (Geek purchase) output tests found to put out 22vac and around 100mah
Please take a moment to subscribe and leave your questions and comments below,
Help support the channel by becoming a patron,
/ oneupthesleevecustoms
And find me on social media @ / oneupthesleeve
and search one_up_the_sleeve_brad on Instagram
Thanks for watching
I created this video with the TH-cam Video Editor ( / editor ) - ยานยนต์และพาหนะ
I think this mini-turbine actually generates a 3-phase AC voltage.
Connect a small three-phase rectifier, at the DC output then additionally connect a buffer capacitor and already there should be much more power come out.
Dang that's sweet! Looks like it's three phase AC, now all you need is six diodes...
+Home Solar Research pulling apart a 12v car alternator so ill get a charge reg and diode block double win
Thanks for the video. I had an idea, not sure if it will work. How about hooking up a car electric water pump to the outlet of a water pump which then runs back into same tank. Not sure if car water pump can generate power from the water pressure.
What would happens if you put more turbine in series in the water pipe? How much current can you get? Will the water have enough power to get the same 22volts on more turbine?
Can you use the power to run the light so you can see when you shower at night? Does it restrict the water flow?
Yes and yes but still more than enough to run a shower
I think you can see how to make it on Avasva . This is just an advice ;)
I love use Avasva Solutions for that issue.
I wanted to use this with a fountain pump, but a few of them like a water generator , my submersible fountain pump uses 9v
It would slow your pump down alot
I bought the 80v 200 ma model basically the same unit but the power control module is diffrent if i take out the module what will happen? And i also have the tp4650 charge control and the 5v usb charge modules do you think i can switch for another module. I wish i would of got the 5v 10w instead.
+erick sal i wish i went for the low voltage one also do you have a bridge rectifier on it
One Up The Sleeve Customs no i just hooked it up to the load it only gave out 12v but 0ma not enough pressure but is the rectifier necerssary? And what do you think about the tp4650
have ya got a link to this how will it go running air through it
na but i can test it ;]
it spins up no worries but also slows down hard underload. i used a blow gun to test it i will see what happends with it plumbed into the outlet line of the compressors tank
i like
Low power output but they are a good thing
(Do you have a link to this one?)
+Home Solar Research i brought it on Geek but the same one 20vac mini water hydro turbine on ebay
What will be the required height if I were to use the flow of wqter
That was at around 50 psi
@@Oneupthesleevecustoms cuz I would like to just connect it to a water tank, for curiosity, what would be the height?
Bagaimana cara menaikkan Ampere dari output micro Hydro?
dari 220mA to 4A ?
How do you increase the Ampere from the micro Hydro output? from 220mA to 4A?
all the over head water tanks source of energy and by help of this type of arrangement in parallel then we got more power and current to power the heating element to heat the water itself by it's own kinetic energy and potential energy combined🔥💢💥💢💨💨💦💦💦💦💦✔
😀👍😛
😀😀😀
Well, the demo was quite good and interesting but needs more info about the turbine and moreover requires a close look the way it functions.
If you are least interested to reveal its "know how ", then something fishy is been played in this demo.
what has confused you
this light .... how much watt and v plz answer
10 watt will turn on any were from 9v to 32v
Can I use it for a model of a hydroelectric power station? The model has only 2 meters fall height
+PianoDrumZ na needs heaps more flow and pressure to start genorating mate
ok thank u !
+PianoDrumZ no worries. Takes a fair bit of energy to make a turbine spin a water wheel may be a better idea cheers
ok thank u very much!
One thing: I just want to power a little LED... Is it really not enough power?
seeing as the water is continually pushed out by more water could you not just put several along the hose to get a higher output?
Yes yet to test it though
Jejejeje... ya estamos como con el sastre de D.Quijote...
Can we use inverter to 220v for this?
No it is tiny output
running water can heated itself with its own energy by using the heating element powered by it's self kinetic energy🔥💢💥💢💨💦💦💦💦✔
bet it's used to power chineseium led light in a bathroom or something lmfao
10W are you kidding me?
??
what's the max mah output? I just got mine they say from 5/80v but nothing about mah
+erick sal dead short 333mah but constant 150
Do you think if it got hooked up to a transformer would it put out higher wattage amp
+erick sal wattage never changes mate
+erick sal so at 15v i was getting 150mah through a bridge rectifier thats only 2.25watts
Do you mean milli amp?
could you give me a email to communicate with you? i am interested to order the water generator.
Oneupthesleevecustoms@gmail.com
Interesting if the language could be understood. Needs an interpreter.
Dos yours stil work?
Yeah not sure where it is but was still a goer
😎Tanks for the video
Thanks for watching mate
Now problem mate 😎and I hope you well by my First subsscraiber
Got some videos yet?
Go to Avasva page if you want to learn how to build it yourself
Orang Amerika itu pelit ilmu padahal banyak penemu dari indonesia