This works!! There’s a catch… the metal lip that the C-clip slides under is VERY soft metal. Prying against it even gently can distort (prevent the barrel from sliding in/out) or break off in chunks. Be careful 😅
Bless your cotton socks. I’m grateful for your help. Mine was a bit more complicated with a spring loaded set and 4 thrust washers and spring indented washers. The principle is the same , especially checking each number is aligned. I used a series from the Fibonacci numbers so I can always remember it. Thanks so much. By the way the spring clip flew across the room and I needed a torch to find it🐥
You don't need tools to set a bike lock. I know all you do is turn something 90% and put up the combo you want then I'm pretty sure you just move it back up a quarter turn. But the lock I bought doesn't have a turn clamp I can find neither side works
Mine does not have a c-clip to remove so I guess I am out of luck. It is the same small style except it is made by Supercycle which is a cheap little lock sold by Canadian Tire Stores. Oh well, thanks for the video anyway.
![[198] Close Up On How To Decode A Dial Combination Lock In 8 Attempts Or Less](http://i.ytimg.com/vi/27rE5ZvWLU0/mqdefault.jpg)
Thank you so much! This video helped me a lot. I had no idea on how I was I supposed to change the lock
Very nice! 👍
This works!! There’s a catch… the metal lip that the C-clip slides under is VERY soft metal. Prying against it even gently can distort (prevent the barrel from sliding in/out) or break off in chunks. Be careful 😅
Good tip!
Another great video just watched your other one to figure out the combination. And now this one to make my own thanks again.
I'm glad this helped, thanks for watching
Bless your cotton socks. I’m grateful for your help. Mine was a bit more complicated with a spring loaded set and 4 thrust washers and spring indented washers. The principle is the same , especially checking each number is aligned. I used a series from the Fibonacci numbers so I can always remember it. Thanks so much. By the way the spring clip flew across the room and I needed a torch to find it🐥
Glad to hear!
Very self explanatory and easy to do..thank u!!!
Thank you!
Super easy instructions thanks
Very helpful
Thanks! 👍
Thank you brother
Yes!!
You don't need tools to set a bike lock. I know all you do is turn something 90% and put up the combo you want then I'm pretty sure you just move it back up a quarter turn. But the lock I bought doesn't have a turn clamp I can find neither side works
👍
Thank you, It was really helpful video!
Glad it was helpful!
Thank you
Yes!!
Thank you so much for itt.....❤❤
Yes!!
Mine does not have a c-clip to remove so I guess I am out of luck. It is the same small style except it is made by Supercycle which is a cheap little lock sold by Canadian Tire Stores. Oh well, thanks for the video anyway.
Yeah, good luck!
Mine doesn't have a red band either and it's not that big
Interesting
Can't open the lock, now what?
Get a new one here; amzn.to/3dEedlR
Thank you sir g
👍
To much work. I'll just try to remember the code lol.
Yes that is the best method!
Or buy another or use the hack to steal someone else's.
My lock is local it is not open
🤔