How to fit a RIB Passenger Seat Swivel to you VW T5/T6 Van Conversion

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 45

  • @weihu880
    @weihu880 4 ปีที่แล้ว +2

    thank you!! best video so far!

  • @jimgordon9516
    @jimgordon9516 2 ปีที่แล้ว

    This may be too early to ask, but just in case you've had the opportunity to see one, will it be possible to fit these to the id buzz?

  • @jasoncummings5176
    @jasoncummings5176 4 ปีที่แล้ว

    Good video Mikey. Have a T4 now so fun and games whilst isolated! Take care, jc

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      Sorry JC, just seen this! Enjoy your T4 :)

    • @jasoncummings5176
      @jasoncummings5176 4 ปีที่แล้ว

      Hi Mikey, it's a t5 I found out. Trouble with my double fly wheel but it's a nice drive!

  • @afraudi
    @afraudi 9 หลายเดือนก่อน

    Any suggestions on whether to unplug the battery if you have a Multivan and heated seats? On some sites it says Yes and on some it says that it is not necessary.

    • @samstorton8763
      @samstorton8763 9 หลายเดือนก่อน

      Yes you'll need to unplug any electrics and then re-connect once you fit the seat back in position

  • @adaptivetravel
    @adaptivetravel 4 ปีที่แล้ว

    I'm a paraplegic and I want to use swivel seats to help me get from the cab into the back of the van (without getting out and back in since this takes alot of time and effort). Can these seats swivel easily with someone seated on them?

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      Hi, I really don't think there is enough room to be sat on the seat while it is rotating. I don't have a van here with these swivels in at present to test the theory but, looking at the video, I would doubt it would work unfortunately.

  • @lucaseveso3617
    @lucaseveso3617 3 ปีที่แล้ว

    Thanks for the video,
    how would you rate this bracket? Is it stable? Or does the seat move a lot?

    • @kiravans5874
      @kiravans5874  3 ปีที่แล้ว +1

      Hi ,there will be minimal movement if fitted to the instructions.

  • @teddyboy7069
    @teddyboy7069 2 ปีที่แล้ว

    Hi can I do this on VW touareg 2005 passenger side?

    • @kiravans5874
      @kiravans5874  2 ปีที่แล้ว

      Hi there, I don't there will be enough room for the chair to swivel. Sorry

  • @johnburgess7165
    @johnburgess7165 3 ปีที่แล้ว

    Hiya, do you have this product (or equivalent) for Land Rover Defender?

    • @kiravans5874
      @kiravans5874  3 ปีที่แล้ว +1

      Hi John, Unfortunately we do not currently supply a swivel for this model. We are always looking to expand our catalogue so in the future it may be something we look at, however at the moment this isn't something we supply. Thanks.

  • @metanon2010
    @metanon2010 4 ปีที่แล้ว

    Hi can you use this swivel with the base for the two seater passenger seat, even with some mods and just replace the seat to a one seater? The base of the passenger side of my T5 contains a battery and lot of electical stuff. I don't think I can go with a single base. Thanks.

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว +1

      Hi, that doesn't really sound possible to me. It sounds like your options are to stick with the double seat and accept it won't rotate with all the electricals under it or replace it with a single seat and base and try to fit electric stuff in the single base. Or, if you are feeling adventurous, move some of the electrical stuff to somewhere else in the van. Unfortunately, if you start trying to modify seats or swivel bases your vehicle insurance would be void.

    • @metanon2010
      @metanon2010 4 ปีที่แล้ว

      @@kiravans5874 Thanks. Still exploring options. Thank you very much for your reply.

  • @barrygiles8116
    @barrygiles8116 3 ปีที่แล้ว

    will these work with the plastic trim on the back of seat base?

    • @kiravans5874
      @kiravans5874  3 ปีที่แล้ว

      The VW seat base trim doesn't fit back on with these in place. However we will have a replacement trim panel available on the website soon. It looks the same as OEM version but does not wrap over the top so avoids the swivel.

    • @barrygiles8116
      @barrygiles8116 3 ปีที่แล้ว

      @@kiravans5874 the drivers side swivel is higher so they should fit with them?

    • @kiravans5874
      @kiravans5874  3 ปีที่แล้ว

      @@barrygiles8116 Unfortunately we could not comment for sure, past experience has shown us that some vans require the plastic trimming down or removing. If the plastic wraps over the seat base even slightly, this is what could interfere with where the bottom plate of the swivel needs to sit.
      The drivers swivels do have spacer bars or raising shims as there sometimes referred to as but they still may not sit even at the back if the plastic is raised over the seat base.
      It's always would worth a try and like I said we offered a 'No Quibbles' returns policy should you find it not compatible.

  • @vdubster
    @vdubster 4 ปีที่แล้ว

    Do you know if anything like this is available for double seats yet?

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว +1

      Yes, we have one for the double passenger seat available on the website www.kiravans.co.uk

    • @vdubster
      @vdubster 4 ปีที่แล้ว

      Kiravans i meant just a top rather than rotating the base.

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      @@vdubster Ah, I don't know of anything that just rotates the top part.

    • @vdubster
      @vdubster 4 ปีที่แล้ว

      Kiravans I read that one was coming but maybe that was the Rib single seat one.

  • @msStoDwa
    @msStoDwa 3 ปีที่แล้ว

    Is it possible to make it with fully electric seat?

    • @kiravans5874
      @kiravans5874  3 ปีที่แล้ว

      Hi , it should be ok on the single swivel.

    • @msStoDwa
      @msStoDwa 3 ปีที่แล้ว

      @@kiravans5874 thanks

  • @paulbates4281
    @paulbates4281 5 ปีที่แล้ว

    Can you use this on a vehicle with heated seats?

    • @kiravans5874
      @kiravans5874  5 ปีที่แล้ว +1

      Hi Paul, yes I believe you can. The hole in the middle of the swivel is big enough to pass any required seat wires through.

    • @paulbates4281
      @paulbates4281 5 ปีที่แล้ว

      Brilliant thankyou for the quick reply. I’ll be ordering one from you. Thanks again. Paul

  • @simonlongworth4791
    @simonlongworth4791 4 ปีที่แล้ว

    Hi there. Is the van you are working on a T5? I bought this swivel and just fitted it to a T6 and the red level fits way worse than on your video. It restricts the seat in pretty much every movement. It looks like I will have to cut a huge chunk out of the plastic seat fairing to allow the seat to go any lower than the top of the range. Do you think I have fitted it incorrectly?

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      Hi Simon, the van in this video is a 2016 T6. On these seats the plastic trim starts to hit the red lever when it is about 4 'pumps' from the lowest position. The seats have about 15 height adjustment 'pumps' in total. I'm not sure if there has been a seat design change on the recently released T6.1 or not? If you can't solve the problem and don't want to start cutting chunks out of your plastic seat trim then please contact our customer service team to arrange a return. You may find that a Sportscraft swivel suits you better as the release lever is located centrally under the front of the seat.

  • @coolbananas3990
    @coolbananas3990 4 ปีที่แล้ว

    Does it swivel both way?

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      No, the RIB swivels only rotate one way.

  • @matthewprice9797
    @matthewprice9797 5 ปีที่แล้ว

    Do they make one for a nv200

    • @kiravans5874
      @kiravans5874  5 ปีที่แล้ว

      Hi Matthew, I have had a quick look on their website and the NV200 is not listed unfortunately.

    • @ccmogs5757
      @ccmogs5757 5 ปีที่แล้ว

      Check out nv200camper 14/5/18 video :)

  • @amacmedia3221
    @amacmedia3221 4 ปีที่แล้ว

    I’ve tried using your plates in my transit, passenger worked fine but the actual swivel plate under the drivers seat catches the handbrake when on as well as off

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      Hi, sorry to hear that. Please get in touch with our customer service team via the website so that they can sort this out for you asap. It may be to do with a particular van model/age. Thanks, Mike

    • @amacmedia3221
      @amacmedia3221 4 ปีที่แล้ว

      Kiravans it’s for a mk8 transit van, after I phoned up to enquire I was told your swivel plates for the transit custom would work for the mk8 transit by your sales people, they don’t. I’m now having to try and lower my handbrake at an additional expense by a mechanic which will then hopefully along the swivel plate to actually swivel. I was not made aware of this at the time I placed the order.

    • @kiravans5874
      @kiravans5874  4 ปีที่แล้ว

      @@amacmedia3221 Apologies for our poor advice, it sounds like we don't have up to date information on that product. Could I ask what year your Transit is please so that I can follow this up.

    • @amacmedia3221
      @amacmedia3221 4 ปีที่แล้ว

      Kiravans 2014, it’s a mk8 version. Hence my call first to check if I ordered it would fit, and was told yes it would