How To Install A JcrOffroad Rear Bumper for the XJ
ฝัง
- เผยแพร่เมื่อ 19 ธ.ค. 2013
- In this video I'll be installing the JcrOffroad rear bumper on the zombie jeep. This bumper is heavy duty, has a 2" receiver built in, and looks right at home on the Jeep Cherokee. These instructions are step by step and should be everything you need to install your own JcrOffroad bumper on your own Jeep Cherokee. What I like about this bumper is that the XJ retains its towing capacity and since the zombie Jeep didn't come with a receiver, I just made out with 2 in 1!
Watch the Entire Zombie Jeep Build Playlist from Start to Finish: bit.ly/1QnBiVu
If you want to pick this thing up for yourself, go here, Helmet sold separately:
JcrOffroad Bumper - www.jcroffroad.com/product/XJB...
Share your videos and earn $$$$ here: bleepinjeep.com/submit-vids
Need To buy Parts? Get them cheaper Here: www.bleepinjeep.com/discounts
Website: www.bleepinjeep.com
FaceBook: / bleepinjeep
Offroad Parks: bleepinjeep.com/offroad-parks
Tee Store: bleepinjeep.com/store
Donate: bleepinjeep.com/donate
Coupon Codes: bleepinjeep.com/discounts
Click here to License this video: bleepinjeep.com/licensevideo
Disclaimer - This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for some viewers and children under 30 years of age. Please remain seated until the ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in jeep mirrors may be farther than they appear. - ยานยนต์และพาหนะ
JCR makes good stuff. Great customer service.
looks awesome matt! shes really coming together
Nice! Put that one on my '98 with the side tie-in armor panels not too long ago as well:). Just picked up their front deluxe bumper for Christmas to complete the package. Definitely dig JCR. Good quality and decent prices.
that is one good looking bumper!
Nice work!
H, I know this is an old video, however no one has a solid example of how those rear tie in brackets go. Even the JCR Offroad site is lame. Any how another win for you in my book!! Thank you for sharing this video with us. P.S. once my XJ is finished I will send you a video link and point out what I learned from your videos that I put in place in my jeep. It may be fun for you to share a real life example of what a regular guy with little skills can do over time.
looking forward to it!
Nice video
GREAT VID
i completed my DYI JCR rear bumper. for the most part it looks great. 1 problem. the end caps do not reach all the way to left and right. They are short about 1/8 - 1/4 inch!! Not terrible but not that happy. Also it took a lot of work and re-work to adjust the length of the mount shafts so the bumper fit in tight. initially it was over 1 inch away from the back sides of the jeep. I can live with what i have for now and i will make minor adjustments later. :)
I'm assuming this will still be the same since JCR modernized their bumpers.
looks good. i want something like this but i think i want it to be less rounded and more square.
If u get the DYI bumper, you can make the edges square. you don't have to round off the welds if you don't want to.
Great video as usual. Quick question though, I notice on their website they say in the description the following-
"OEM and Aftermarket receivers will not fit with our Crusader rear bumper without trimming the bumper for clearance"
I thought the receiver was built in to the bumper? If I'm wrong what exactly would I need to trim in order to tow the full rating?
Thanks for the info
In the pass they offered this bumper without the hitch included. Now it seems like they offer less customization as in the past.
Just ordered this bumper. I have a hitch on my Xj. I'm not able to use the nutstrips from that?
You should be able to use the factory nut strips or the ones from JCR to mount the unibody tie in brackets. You will not need the nut strips to mount the bumper.
the factory tow package comes with a nut strip already? Can I use that instead of buying the 60 dollar strip from jcr?
+Dylan Ford sure
And flux capacitors
Did you let JCR know about the video yet?
How do ypu anchor a hitch to the bumper, is there a hole for a pin?
thats kinda wierd, would suck if it was a cold day and your hitch was frozen in there
The hitch has a hole and you cannot see it as it is on the back side of the bumper back wall that it sticks out of.
What exactly are the purposes of the nut strips and unibody brackets?
Extra bracing?
+Salzig Hund yes, for towing and tire carrier options.
Watch out for shopping carts they can destroy bumpers
LOL JCR doesn't make this bumper anymore
Oye amigo yo quisiera saber q tan caro m sale ponerle un bumper de metal a mi toyota rav4 m gusta mucho tu trabajo y quisiera saber si m puede aconsejar
Usted va a tener que hacer uno proque no venden para tu Rav 4. Tambien va tener que usar metal que no es tan guerso proque el peso no va a ser buen para tu rav 4. Mas guerso, mas peso y menos millas por el tanque de gas. vende tu rav 4 y compra un jeep cherokee.
1st lol:D looks good
Muffler bearing 😂😂😂
Click here doesn't work.
HI I'M NEEDING A COMPLETE COMPUTER FOR MY 96 GRAND CHEROKEE IT'S GOT THE 4.O ENGINE N AUTO., N 4X4 AS WELL ONE SIMPLE COIL TO FIRE IT UP..... A VERY SIMPLE JEEP BUT NO GOOD SITT'N......... I LIVE IN NEWARK,OH., 43055 LET ME KNOW IF U CAN HELP ME OUT.... PLZZ NEVER MENTION ANY ANYTHING TO DO W/ FACE BOOK I'M NOT A FAN AT ALL OF IT.........