Neglected Troy-Bilt Snow Blower Basket Case - Will It Run?
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2024
- This Troy-Bilt Storm Snowblower with given to a friend. He had intended to restore it, but decided it was little more then he wanted to deal with. So instead, he gave it to me. The free ones usually require the most work. It looks like it has been outside for several decades, has no spark and am told the carburetor has issues. Will it plow again?
Snowblower Model: Troy-Bilt Storm 10030
Tecumseh Model: HMSK105-159913B (HMSK105)
Belly Pan: Troy-Bilt 784-5732-0650 (superseded to 784-5638A)
Chain: Troy-Bilt 713-0233 (1/2 Pitch #41 X 30 Links)
Lens: Troy-Bilt 725-1672 (superseded to 925-1672)
Ignition Coil: amzn.to/48OPmmI
Inner Tube: amzn.to/4aTTdjW
Mini Tire Changer: www.harborfreight.com/materia...
Ratcheting Breaker Bar Adapter: amzn.to/41Poh0p
Roll Pin Punch: amzn.to/3tMD4fA
Rust-Oleum 303473 Troy Bilt Red: amzn.to/48pPGbN
Spark Tester: amzn.to/3HetBAR
Visit My Amazon Store:
www.amazon.com/shop/jamescondon
I no longer use Harbor Freight Super Heavy Duty Degreaser in my ultrasonic cleaner. Harbor Freight changed the recipe. The bottle previously stated "NON-CORROSIVE". Now it says "CORROSIVE", "do not user on Aluminum". It now damages most carburetors.
If you want to donate to the channel, you can use the TH-cam "Super Thanks" feature or via PayPal: www.paypal.com/paypalme/james...
10hp, Fixed, How To, How-To, Ignition Coil, Load Test, Mouse House, No Spark, Old Fuel, Rebuild, Repair, Rot, Rust, Small Engine, Snow Blower, Snow King, Snow Thrower, Snowblower, Snow King, Storm 10030, Tecumseh, Troubleshooting, Troy-Bilt Storm 10030, Troy-Bilt - แนวปฏิบัติและการใช้ชีวิต
She went though that wet, heavy stuff like a champ! The proceedure was a success, doctor.
James... The best way to clear snow is with a cup of coffee in your hand looking out the window watching your son doing it
Normally, I do not like super long videos but James is such a good instructor that I just can not get enough of his videos.
The only thing that is missing is that he uses some tools that are not easily identifiable. It would be nice if he could post the P/N or link to obtain them.
"Earned it's oil change" always makes me smile!
The snow king motor was LEGENDARY for being durable. The power equipment shop near my home surmises that my snowblower will rust to bits before the engine is worn out. My father purchased it 30 years ago... and other than oil changes/lubrication.... it's just kept going. Every season I pull it out THINKING it will finally need carb service... and the dang thing just starts and runs properly.
As long as oil level kept up
I have a love hate relationship with Tecumseh's. But the 10hp Snow King has always been a great engine for a snow blower. Nothing that has followed can beat it.
@@jcondon1 I've had a few OLD OLD mowers (70's era) with super good Tecumsehs on them too... Some of the production /w/ the plastic carbs, and the lack of a governor arm spring would leave the motor hunting for the RPMs. The biggest problem we have now is the parts cannon for keeping these things alive.
As a motorcyclist in the 1960s, my Dad said he used to remove his chain every few weeks and just soak it in oil. Thank god for O-ring chains!
There used to be a large diameter shallow tin that contained grease/
You washed the chain in gasoline and cleaned it and dried it.
Then you curled it up and placed it on top of the solid grease..
and put heat onto the bottom of the tin.
a camping stove or the wife's electric stove in the kitchen when she was away...
The grease melted and the chain submerged...every nook and cranny filled with lubricant.
After 30 minutes you fished the chain out by the wire you had slipped through the last link and hung it up to drip dry back into the grease pan.
Then the chain went back on the motorcycle...for however long it took until you felt it needed another dose.
you took that old, beat up snowblower from something most would have thrown away, to almost new condition.. I agree, the older machines were built much more solidly, its worth taking the time to do a full restoration, great job 👍
*wakes up not remembering what day it is, blearily drinking coffee… checks youtube*
It’s Thursday! And a nearly 2h video!
Nice
You need to lubricate the tire bead when installing it with a tool like that. They make specific tire mounting lube but Armor All or something equivalent would work also. It makes it seating on the rim easier. I also coat the tube with some talcum powder so it won't fold up on the inside of the tire. Installed hundreds of motorcycle tires with a Harbor Freight manual machine.
My father had a Troy-Bilt blower. When the city put sidewalk in on his street he had to put a 3 foot high retaining wall because his lawn was higher than the sidewalk. The Troy-built never threw snow very well, especially heavy wet snow. The one you have there has a tool to clean out the chute. He was going to buy a new blower. We took it apart and changed the pulleys and belts to run the impeller faster. We also added an impeller modification kit that added pieces of belting to cut down the gap between the impeller and the housing. After doing that, the blower not only blew wet snow over ten feet high but also the melt water.
This is probably well known by most living in the rural West, but in areas where mouse borne hantavirus is prevalent, don't do what James does at 22:10 or so, and blow out a mouse nest with compressed air. Saturate the area in a bleach solution, and wipe out. Not a dig at James, rodent spread hantavirus is pretty unheard of in the NE. It's not exactly common in the West, but it's a really nasty disease and it's usually acquired by stirring up mouse waste by sweeping or vacuuming and breathing in the virus.
Hello James. Chris from Pennsylvania. Last year in July I bought a Toro 8 horsepower snowblower. It had good compression but did not run. I bought it really cheap. Once I got it home I took the bottom pan off 5 hands full. mouse nest. By the way I use Anti-Seize on axels it just works better. 🤗
Properly maintained these engines will run forever, Tecumseh’s are definitely some of the best snowblower engines.
The engine will definitely outlast the actual snowblower.
Fluid Film works really good for lubricating the drive assembly on snowboard, as long as you don’t get it on the desk, but if you do, make sure you clean it off.
Still have my Ariens 8-24 of 1973 with Tecumseh HM80, original engine (a little bit tired but still blowing snow quite good) Just maintain it and it last ;-)
That was the era where powder coating was used instead of paint. Once powder coating gets a scratch in it, moisture gets underneath and it starts rusting and peels the powder coating off. Western used powder coating on their snowplows too and they ended up paying for many customers to have their plows sandblasted and painted.
I have a better product to use.....old fashioned but it works.
The name “galvanizing” was first applied to the process invented by Stanislas Sorel.
In 1836 he patented a process of cleaning steel and then coating it with zinc by dipping it into molten zinc.
He called the process of galvanizing the “galvanic” method.
This was the beginning of modern hot-dip galvanizing.
That pan would be easy to fabricate. A piece of galvanized metal would be best. Great videos Cheers
Huh, beat me to it. Yes should be easy to fabricate a new part as it's not a complicated shape.😏👍🇬🇧
TH-cam is amazing. I once had an old 2 cycle motorcycle that was balky to start, and eventually wouldn't (start). After watching this video, I'm convinced it had a bad coil. Alas, I sold that classic machine and have regretted not being being more talented to diagnose it properly.
You have one of the best channels on TH-cam but probaby don't even know it. Thanks tremendously pal..
Hello Jamea well done. The old TroyBuilt is Ready for another 20 years service.
You put a heck of a lot of work on that, and then showed us an ad for a slightly lesser machine being offered for free. Talk about ironic ! Lovely job though I enjoyed all of that, thanks :)
I really liked the dish soap idea, Dawn might be a good choice.
Spraying some teflon or silicone spray in the bucket really helps with snow not sticking
I can smell the spray pain from here. Great job!
35:17. I always find watching the ultrasonic do its thing in double time oddly satisfying.
Warts and all. I will feel less bad after pulling my project back apart after putting it together in the wrong order. Nice work as always
Well done. Now has a good second life. It may not have been used much, but it was left outside and neglected.
I have an Ariens snowblower purchased back around 2007. This has powder coated paint which is holding up very well. I keep the machine in my garage when not being used. This has the heated grips which I thought would not be used, but now I am a convert. I use the heaters even with gloves. A big help in keeping the gloves dry on the inside and warm.
I live in a apt. Complex where people are always throwing appliances out that actually are fixable.I hate seeing still dry usable expensive items tossed out. I once fixed a top of the line Keurig coffee maker that had a bad pump. Keurig made the machine so that it was nearly unfixable because disassembly was ungodly. It took me days and days to get it apart.
Hi James, dirty oil is what I like to see before working on engines that someone else owned, new oil usually means that the owner caused engine failure.
the carburetor is most likely made of a zinc alloy like many auto carbs from the 60's.
you might want to check the grease in the auger gear box, probably ok.
Rich
Very true
😅😅😅😅😅😅😅
Boy, does this bring back memories - that is the same snowblower I had when I lived in Canada...except mine was labeled Canadian Tire.....
You’ve got the skills to pay the bills. Nice job.!
Great refurbishing James. I did the same repainting with an old snow blower and put apart the engine, auger, and drive mechanism. Took me 2 and half weeks for painting it with two coats of primer and two coats of finishing paint, but the outcome was amazing. Sold it for $490.00. I was happy and the buyer too, since it looks like new.
The prep and painting was a lot of work. Much more then everything else. Kind of hated to put it to work after that.
@@jcondon1 Just think if you had a sandblaster how much faster it'd gone, you know you want one!
@@Kinann Needle scaler is also a good option and less expensive/messy.
This guy is really passionate in fixing anything he does truly appreciate these informational videos
James, love your attention to detail and desire to make things right in all of your projects.
Love watching how you do your analysis to figure out what's wrong with a machine. You made me wonder why I threw out my old snowblower, but I didn't know what I didn't know so ....
Wow, that came out looking like new! Kudos for adding the model/serial labels. Refreshing to see such attention to detail! I'm a software engineer, and it brings me joy to see someone take pride in their work regardless of field
Mice like the drive train box as well as the blower housing for building nests , so always give a once over before winter .
I do a lot of chain saw puttering. When I get an old saw with a rusted chain I soak it in vinegar overnight to remove the rust. It works quite well to free them up.
Exactly, I used vinegar to remove rust on an old cast-iron fry pan and it worked beautifully!
I do the same thing but after I take them out of vinegar I raise them and into a tub of engine oil for a day
Love it when you have " an oversight on my part". That is so typical of so many of us. Since joining your site, I have found my self taking those extra few minutes to do the job right. I feel like I learn something new during each video. Please keep them coming.
a cup wire brush for your grinder is a game changer compared to your drill
Or you could use the 3M Roloc products actually made to remove paint....
The most impressive part is, the amount of paint in that one can. ;)
EvapoRust makes those chains like new! You need a Chain Breaker and Spinner Jim!
I do need one, but already running out of space in my toolbox.
@@jcondon1then you need another tool box😂
James, I'm so glad you spent the time to paint the body. It looked so good. Excellent job.
Thanks 👍
I love your longer videos. I feel like I can watch you work for hours. Oh, wait, I just did! LOL. That snowblower is a beast.
James. I really enjoy the thoroughness of your videos. you take the time to include all aspects of the rebuild. Very complete and educational. You do a great job!!
😊
I love this channel. Your troubleshooting approach has already helped me with my own lawn mower. I thought I'd take advantage of the winter and just finish it off. It turned out that the carburetor was completely dirty.
These blowers were AFAIK all built by MTD and are fairly common to see rebranded as troybilt, craftsman, and several others. I have one that's near 20 years old that was given to me this summer and it's identical aside from the cowling. The motor runs like a champ. Tecumseh made good stuff
I was going to make that point as well. MTD right here in Cleveland Ohio makes most of the big box machines, and so many parts are interchangeable. I noticed the Craftsman label on the used belly pan…that cinched it right there.
I wish all mechanics were as conscientious as you are. Great job!
Dang I’m a sucker for snowblower repair videos. I don’t know what it is. Probably a psychological problem. But I love them.
Another good video Jim! a little soapy water on the bead area of the tire should help your tire changer put the bead on easier. I realize.it is an old tire, but it should help some. Also you missed lubing the grease zerk on the shaft where you put the new chain, and cleaning the drive wheel to remove any grease that may be on it. I may have missed seeing you do these things. Nice machine. I have a 2021 TroyBilt Storm...works great!
Another award winning resuscitation! Great work!
James, you do a really nice job and looking at the weather you’re gonna get a chance to use that in just a couple days
Honestly pls keep the videos coming, the way u construct your videos is flawless. I know it’s not easy to construct the videos so thank you 🙏
Whenever I've used PB Blaster I always let it soak for at least an hour, giving it an additional spray every 15 min. It had never let me down. For very stubborn items I'd let it sit overnight. Again, always worked with patience on my part.
I have a Husqvarna snow blower with the same motor. I had it sitting in my shed for about literally 10 years. I always run the carb dry but was expecting a clogged carb. The machine needed the starter motor gear replaced, the stator replaced and some parts in the blower assy all of that I replaced/fixed. Then drained the fuel tank and refilled with good gasoline. Motor started with ease. Used it last weekend we had about a foot of snow first of the season.
On a tire tube install, you are supposed to coat the tube with talcum powder to prevent wrinkles on installation 😊
Talc now is outlawed. I use arrowroot powder at bath times now.
@@johncourtneidge lol, I know the lawyers are getting rich off it, but I wasn't aware of any bans.
I got my father's Yard King snow thrower & it has that same exact 10 HP Tecumseh Snow King engine. He bought his brand new in 2001 from the Home Depot. That engine now has 178.41 hours on it. I just ran an extension cord out to the shed as we have a winter storm heading our way with bitterly cold temps. So, Lake Michigan snow make it happener machine will be kicking into high gear here soon. They are talking about a foot, maybe up to 2 feet of light fluffy lake effect snow & 60 mph wind gusts.
James, I really enjoy watching your videos! You keep them interesting and are very thorough! I live in central Texas and watched the whole video of you working on the snowblower! I work on mowers, string trimmers, and leaf blowers as a hobby. I don’t see many (any) snowblowers around here, but did enjoy your video! One of these days I’m going to tackle a generator. I see them all the time on marketplace for sale for around $100. Thank you for your videos!
James is the best on youtube when it comes to every little detail. And he is a wonderful person. Thank you so much James. God bless you and your family
Aloha James. Great job on this snow blower. I wish I had someone give me a 10 hp snow blower like this one! I have an older Ariens 4 hp 24" snow blower that I use here in New Mexico, but sometimes I need more horsepower than the 4 hp snow blower that I have. When the snow does get really deep, I just take a partial pass and it works well for me. For the rusty parts on this snow blower, you need a Roto-Strip wheel that goes into your drill, and it will take the rust and flakey paint right off right down to bare metal and make it ready for priming. If you have a drill that will run 3,000 rpm, the Roto-Stripper will work even better and quicker. It will even get down into the pits of rust in the metal and get the rust off the surface. I have a coarse wheel and a fine wheel Roto-Strippers and they work great for removing rust and flakey paint. Also, you should do the paddle upgrade on the 2nd stage impeller blades and install rubber on the ends of the paddles with the rubber screwed to them, and then you can send even really wet and slushy snow back to where it came from. My snow blower used to clog up on wet and mushy snow, but after doing the paddle upgrade with self-tapping screws, now it doesn't clog up at all, and you can throw the snow much further. The small gap at the end of the paddles inside the 2nd stage cylinder causes the snow to gather inside it and clog up the discharge chute, and that jams everything up with a big mushy plug of solid ice in the outlet chute. The paddle upgrade will prevent this from happening, and you will probably never have to clear a plugged up chute ever again. It is easy to do working through the discharge chute opening, and for you it would be a piece of cake, and it will make your machine perform much better in the wet and slushy snow. Watch some videos on line and you will see just how easy this modification to your snow blower will be, and you will be pleased with the results. Way to go on this job!! I really enjoy all of your excellent commentary as you work through a problem, no matter what it is... Aloha..
As always a lesson in applied common sense. We can hope a lot of youngsters follow, and can't wait to get their trainee paws on tools to *make things or make things work.* Thus fulfilling the primary definition of a man.
Great job, James. What looked at first like a snow blower that was not worth fixing up, ended up being a decent snow blower. Sense it is an older Troy Bilt, it is a much better built machine compared to the newer ones. And those Tecumseh Snow King engines if not neglected are great engines. I have two 1980 Toro snow blowers that my dad bought new with Tecumseh engines that are still going strong. I was the one who kept them maintained for my dad. Now that he and my mom are passed on, I still use them every winter. Another thing that you could do to increase performance of the Tory Bilt, especially in heavy wet snow, is install an impeller kit. Excellent and very entertaining video. Thanks for sharing.
That one wasn’t a two stage?!? I simply assumed it was.
Seeing it move the wet heavy snow, without a second stage is pretty impressive.
I’ve got a two stage belt driven snow thrower on the front of my tractor and it gets boggy when it’s a heavy wet snow.
As with all your projects, very nicely done.
Congratulations Jim! Another great, lucid, clear, well-produced teaching video - with no ego. Thanks
i have one just like this in the shop..mines a ten speed with rev..a 2 stage...i bought it off a guy near Pitts..he said he could not get it running.it was like new..so i brought it home.it had no spark,,,.it took a plastic key to turn it on,,that moved two pieces of steel apart,to unground the coil..so guess what,,the two pieces of steel were rusted to each other..not ungrounding the coil..so i put fresh gas in it...and fixed the key switch,,like throw it away..haaa,,i put a switch on it...i dont use it a lot,because i have a blade on my 4 wheeler...but it is a backup...a nice buy for 75 bucks id say..i used it for 2 years,,does it throw the snow.. you brought back memories James..great video..
My Dad swore by Troy Bilt garden tillers. Problem is, when they broke I got to work on them. Thanks to you and Mustie1 I have no questions about snow blowers. Oh wait, I live in Louisiana. Oh well, it was good entertainment. Thanks.
From snow free, Melbourne, Australia, that looks impressive !! Thank you.
James, you are funny. You tell us you won't paint that bottom part but then you paint the largest part- the auger shroud after saying how flat the market is. 😊😊I'm not complaining, mind you.....another victory....
I really did not want to paint it. It took far longer to prep and paint then everything else combined.
I have never seen snow, therefore I have never seen a snow blower, however, I really enjoyed your video.
Thank you
Speed-blowing bonus footage.
Snowblower: The Movie!
Very nice!!
I am a hvacr hospital tech just love your troubleshooting skillset watching from the Caribbean 🇱🇨
I just recently got done doing one of these free from a friend snow blowers. It's ready to go now, so it probably won't snow.
In my world, the guy who gave it to me would want it back.
for the first time I was ahead of you... these machines have a Primer Bulb Button that you have to push 2-3 times to prime the carb... that's why your starter fluid worked... 👍... just a piece of aluminum sheet metal and you could just make a new panel...
Just a tip for tubes in tires… BABY POWDER! It works so well and I haven’t pinched and punctured a tube since applying it. It acts as a dry lubricant between the rubbers and lets the tube slide and move as needed to seat in place.
I have a 45-year pld Roper snowblower that internally is identical to that one. Same engine, yours has fancier controls but you can tell quality has dropped over the years. The frame and belly pan on mine is 3/16 steel. You do not want to drop that pan on your foot. Don't ask. Great video getting an old machine new life. Bought mine in 1979 still runs good just haven't had the snow to dig it out.
I purchased a “99 TroyBilt 8hp snow blower in “17. It was like new condition. Paid $325. It’s an absolute beast. It’s the all metal version with the metal chute. We had over a foot of snow today in Wisconsin. The machine bulled through it with ease. I service it every spring before tucking it away. Mine has a hood, hand warmers, and headlight. It’s an awesome machine. Thanks for posting this.
that little gem you have is almost the same one i have got. i had a earlry 1990s mtd,montgomery ward 8/26 8 hp snow king tecumseh put new tires on and a drive disc painted the auger etc,adjusted greased and rebuilt that crappy tecumseh carburetor. what a gem those carbs are. i run non ethanol 91 octane and 10 w 40 in this thing. make sure that govenor is always working as it sopposed to . this little monster pushes sno and will even cut down the snow that was plowed in medium snow banks. i live on a farm with a dirt driveway and this thing will give you a real good workout.ive also have a 1968 yardman 8 hp snowblower that i have to work on belt alignment. it keeps on throwing the belt off. it has a picture of a pelican on the front bucket scooping up snow with its beak. another free machine a freind got from an elderly neighbor. the relics sometimes are better than the new junk that is made.take care i watch every week what ever you fix.
Hi Jim, another excellent video, gotta say I like the "paint booth".....😁
Aways a treat to watch you diagnose and solve the problems while educating us (me) thrown in. Good to see the Endo files are helpful
for you, I have tons more--let me know if more needed. Thanks again
I really like that yellow one with the tapered file. It reaches well into the smallest jets. Thanks again for those.
34:18 also known as the Money Hole! The o-rings on the plastic emulsion tube are standard -006 o-rings available anywhere for pennies each vs 632547 Tecumseh O-rings which are $$.
I have about 100 of them in a bag. I have had bad luck removing the plastic emulation tubes. They like to break in me.
If someone hasn’t already commented this… spray and coat the inside of the discharge shoot with Pam cooking spray. Really helps with the snow discharge! Great job as always!
I wish I had the same meticulous mindset, but I do not - I do enjoy your videos. The editing really seals the full package. Very Well Done and thank you
Just think Jim, with the big blow coming your way this week end you'll be able to get alot of use out of this unit. Have fun. Earl in Michigan
Just a little tidbit Johnson, Evenrude 2+4 cleaner works good on the inside of the carburetor if it’s not very green it can be bought at your local marina or at the Sporting Goods department at Walmart. breakaway spray really helps with removing and installing tires.
A cordless multi-tool with a scraper blade does a nice job on loose paint.
Buy yourself a 6 pack of the correct shear pins, in case winter comes back again....
James, thanks for going the extra mile and painting that snowblower bucket and auger. You brought that snowblower back from the dead. That machine is nicely built. I was surprised that the engine ran so well after getting the spark issue resolved. I have a much newer version of that same snowblower with the smaller Briggs engine and mine struggles in slushy snow. We're going through a snowstorm in the Chicago area right now so I got to put my snowblower to work earlier. Did much better with the heavy snow today than with the slushy mess we had a few days ago where it kept clogging up. If I would have sprung for the larger engine model when I bought it, I wouldn't have had issues. Great job!
2 hours with jimmy oh alright
Hi James, Great video, I have nearly the same thrower, but Canadian Tire model I bought 25 years ago , do 18 driveways and sidewalks every time it snows here in Ontario. Always starts just run premium fuel , had to replace some parts over the years but that's to be expected, Put rubber extensions on the impeller cleans tub out real good, biggest problem was throttle control engine would not stay revved up, Put a cable control up to the console , Works great, Hope I never have to replace this machine. Gord Ontario Canada
A good ultrasonic cleaning of the carb and you should be good for a snowy season!! 😁 Usually I use diluted simple green in my ultrasonic cleaner.
I have a 20yr old Ariens 1128 snow blower with a Tecumseh engine, never missed a beat !
Rust , the reason I bought a sand blaster. Don’t use it often but it’s worth it when I do . I also cook chains like that in pan oil on the BBQ.
Impressed how thorough you are !
I hate to say this but..... I would quite happily just watch you clear your drive with the blower.. Weirdly relaxing
James, I agree with you - the snow blower market has really gotten weak the last few years. Older units that would have sold for $500-$700 5 years ago, are now "asking" $250-300. I have fixed and flipped about 7 units in the last few years, and the market has sure been soft lately. And just like you said, its a LOT of labor, even if you have a running engine. Great job on this as always! And it's funny, when you first engaged the electric starter, I said to myself, boy that's super fast spin! And then you said the same thing! I was almost thinking there would be a compression issue, since it was spinning so fast.
Suggestion. When removing a flywheel or pulley try using a pry bar and a pneumatic chisel on the shaft. Prevents you from playing whack a mole with a hammer.
I am SO jealous! I saw you blowing with no gloves on! This machine has every single bell and whistle I would want. I have a yard and garage full of snowblowers, all free except the first one I got. Some are in excellent condition and some are really nice, but none have lights, steering control, remote chute elevation control or heated handles. You lucky bastid! 😉👍
For these style fuel tanks, I like using the "right angle" version of the fuel shut off values and use a very short piece of fuel line to connect from the tank to the valve
I order the 90° ones from Amazon around $10 with clamps. For 10. The napa ones $5 each always leak
I'd say it got used a lot. It just wasn't abused, only neglected. It's true that those thin housings get bent very easily, but to have oil that black sitting in the engine that long to stain that dipstick require considerable engine hours. Or, it was run with the choke on all time and the oil was always full of gas, which is probably a worse scenario.
Hi James, just a tip, put some talcum powder on the inner tube first, you will have a better day, keep it up 👍
Dish soap on the tire bead works wonders too... I'm just wondering why you did not air up the tubeless tire to find where it was leaking then use a tire plug?
No Doubt there have been no snow storms like we had in the early 90's where they were several ft. but in the last five years I think I had to take my electric snow thrower out once. Can't say that I mind, I don't like the cold anyway. Nice job. after watching you work I have a new name for you and that's "Picasso". Hey quick note, some tires are more easier removed from the back when you have rims that are not symmetrical. This was true for many of the Mag wheels in the automotive field.
Another great job! Sometimes a spray of WD-40 or brush of diluted dish detergent will make those bead bars slide around the tire easier. Sometimes those tires are so hard that they just don't give easily. I broke my aluminum bead breaker bar working on my Deutz Allis rear tires on the first use! The rest of the HF kit is still usable.