Hangar 9 Ultra Stick 10cc - Assembly Part 1

Hangar 9 Ultra Stick 10cc - Assembly Part 1

[@MrApache64AH]

I am building a Ultra stick too, and low and behold, I too am missing a bolt from the control horns pack!!

[@tdogrc]

lol. Must be a hanger 9 thing 😂

[@cjb9754]

YES! I'm into balsa & nitro planes. Had this plane for years but it's always fun to watch someone else's work. Keep 'em coming.

[@tdogrc]

Brill thanks 👍🏻

[@nunyabizness9544]

Thanks for this detailed video. I just got thee exact same plane yesterday.

[@tdogrc]

Cool. Thanks for watching! 👍🏻

[@mapes12]

Small tip: When marking the tail surface for the removal of covering ready to glue it, use masking tape instead of a pen. Much neater. I'm about to put this exact same model together so following with interest. I'll be fitting the recommended EVO 10cc petrol but not inverted. I'll be interested to see how you route your throttle linkage if you decide to install your ASP in the same orientation.

[@tdogrc]

Yeah good tip cheers. You’ll see in the next episode my elevator hinges failed and snapped! Good job it happened on the bench and not while flying!! I’ll be putting it up on TH-cam tomorrow. Thanks for watching 👍🏻

[@MrApache64AH]

You have placed the top hats for the servos upside down..

[@tdogrc]

No that’s how they should be. Cheers

[@MrApache64AH]

I was referring to the manual as it has a photo showing the top hats with their brims pointing up.