I am a patient of type 2 diabetes and using a Libre1 sensor with Nightrider BluCon to get real-time and continuous glucose monitor. Also the app updates me which food impacts on my sugar values.
Nice video, I am using Freestyle Libre US 14days with Ambrosia Blucon over 8 months now, it converts Libre sensor into a full CGM and you will be able to see glucose readings every 5 minutes on phone and watch without scanning the Libre sensor. Now I don't need to scan the Libre sensor and gets reading every 5 minutes on my phone.
I monitor my blood glucose values through Freestyle libre sensor and Ambrosia Blucon device which updates me every time when my glucose values go up and down, which really helps me a lot every time.
Thank you very much for this explanation... I have a question: How can I connect the One Call glucose testing device to the computer to transfer the information on the device to the computer? Is there a video that explains this thing... Thank you, and I wish you good luck and success always.
Hi i use On call plus glucose monitoring system, i get 12H error on my display and its not moving to next screen even after pressings M or S key. How to fix this problem. Kindly suggest
In my on call plus after conducting the test, result is appearing in mg/dl but the test result is incorrect because it showing very less values every time in every person i.e 34 mg/dl , 24 mg/dl. This is a gross error in result. How to fix it ?
How do I'm know that my on call has a problem? My one been more specific check that test stars, but it don't recognize my blood any more and not only that because the " blood of test" which comes with on call also doesn't work
It was Doctor Oseiwe who cured me from Diabetes, you can also get in touch with him on TH-cam channel Doctor Oseiwe, if you need help and be cured completely🇬🇧🇬🇧
I performed the quality control test well, it gave me a reading. But when I tried to do the actual sugars test, the machine first read pl then now I can't switch it on, what could be the problem? I just bought a new battery yesterday
Check on how you place the test strip. Just the tip should get into contact with the blood sample. Watch the video at that exact time when the test strip is used
trashed the user manual , thanks for the video tutorial !
😂😂😂
🤣🤣🤣
👍👍👍
I am a patient of type 2 diabetes and using a Libre1 sensor with Nightrider BluCon to get real-time and continuous glucose monitor. Also the app updates me which food impacts on my sugar values.
Nice video, I am using Freestyle Libre US 14days with Ambrosia Blucon over 8 months now, it converts Libre sensor into a full CGM and you will be able to see glucose readings every 5 minutes on phone and watch without scanning the Libre sensor. Now I don't need to scan the Libre sensor and gets reading every 5 minutes on my phone.
Thank you so much for this video. It makes a whole lot of difference. God bless you
Thanks for the help
Thank you so so much, for making this video, for making this device more easier to understand more easier to use.. its a great help. 👏👏👍
شكرا جزيلا على التوضيحات انه عمل رائع
Thanks for the insight
Thank you sir! I doctor gave me this on call plus meter
Thanks for making video for all of us
Wow that's awesome 😊
Thanks for the explanation 😀😀
Thanks for your video. It was helpful for us.
thanks for ur assistance
I monitor my blood glucose values through Freestyle libre sensor and Ambrosia Blucon device which updates me every time when my glucose values go up and down, which really helps me a lot every time.
My son is using Nightrider, which always helps us to get alarms, readings update. Life changing product.
Thank You So Much
Thank you very much for this explanation... I have a question: How can I connect the One Call glucose testing device to the computer to transfer the information on the device to the computer? Is there a video that explains this thing... Thank you, and I wish you good luck and success always.
When performing a quality test I got a reading of 109 !!!
2:27 what happened if the quality control test falls into range CTRL #2.
Thank You so much , This helped me ❤❤
Is code important, is code effect the result
Very well explained.
Thank you so much for the video. It was very helpful
Well explained 😍
Very helpful
اذا كانت الابره قديمه الصنع يعمل الجهاز ام لا
Thanks for your video
How can I change mmol for mg/dl???
But why did i receive my oncall .. device with user manual in arabic
What is mean of CTRL 0 CTRL 1 nd CTRL 2?
How to change year.. I wrongly set 2024...pls help me?
How can I change to mg/dl unit
When performing the test,1st result got 114 ,not same cntrl 0,then what to do
Thank you
E-3,E-4 means
My control test went fine but the actual test didnt even give me a reading
After checking one person blood sugar result to check d another person blood sugar wt setting should be done
Merci 👍👍
Whats the meaning of E-4
How can I change settings from mg/dl to mmol/l??
Is that possible to use oncall exra strip with oncall plus device?
Very useful. Thanks
Hi
i use On call plus glucose monitoring system, i get 12H error on my display and its not moving to next screen even after pressings M or S key.
How to fix this problem. Kindly suggest
How do I change the results unit of measure to mg/dL from mmol/L?
did you ever figure this out ????
@@samirawarsame6482 unfortunately not. I think this doesn't support it.
Just Multiply the result by 18
example: 5.9 x 18 = 106 mg/dL
👍
@@drinks_editor thank youuuu
Thanks for the calculation yar😊@@drinks_editor
How does one set the meter from mg/dL to mmol/Lt plz?
I just bought this test kit last week and was asked which version of the device I wanted.
That suggests that you cannot change the reading.
In my on call plus after conducting the test, result is appearing in mg/dl but the test result is incorrect because it showing very less values every time in every person i.e 34 mg/dl , 24 mg/dl. This is a gross error in result. How to fix it ?
Why for me shows 114
What happen when the control solution does not match the glucometer
My machine is not recognising the code chip after being inserted
My machine doesn't show the ctrl ranges what could be the problem
. اذا كانت ااشرائح قديمه يعمل الجهاز
how can i find this product please.. what should i do now?
That was so helpful, thanks a lot
Quality control chequing time E-4 Showing wath is the problum
Thank uh
Je veux la version française de la vidéo. Merci
What does 1n text in the upper right corner mean
Blood Glucose Meters | 4in1 Glanber | Glucose, cholesterol, hemoglobin, uric
Good knowledge
where can i buy extra strips I can't find code 947 strips
I don't see the outside code in the machine, what to do?
Hum 2year s use kr rhe h
When it reads HI or E what does that mean??
Nice
Can I use g113-119 strip in g113-117?
How do I'm know that my on call has a problem? My one been more specific check that test stars, but it don't recognize my blood any more and not only that because the " blood of test" which comes with on call also doesn't work
what is E-3?
Can I use the same needle with two patients ?
You can't
No
Geez.
The chip doesen't work it's in like in the video, and when I introduce a strip, It doesen'T reconizes it
Yaa same prblm for me too
What is the use of hour mode? Which one should I choose 12h or 24h?
it is hour mode. İf you choice 24h you see time as 23:30 at 11:00 PM.
My machine date is 2023 how can we set it on 2019 as the year is not reduce while setting date
Am facing same problems in my device too
E-0 issuse. Anyone have any idea ?
I missed the code chip. Whats the solution?
Oops I don't wash my hands, I don't wipe with alcohol swab nor do I wipe off the first droplet...
In my Glucometer it shows E - 6
How to change unit to mmol/l
5.9 means
اذا عطل الجهاز ما يعطي أرقام مضبوطه ماذا نعمل
قيساته غير دقيقه تزيد او تنقص من ٥٠ - ١٥٠... التحليل من الوريد افضل
Model- On Call Plus
very helpful
Meu aparelho não quer mais funcionar nem trocando a bateria,o que fazer 😱😭😭
What should I do when it displays E-6 on the screen
That is battary law
On call plus E4 error problem .
E 6
???
price
My machine is not switching on. Tried a new battery too. Still not working
Defective machine
Super
today I chack my blood sugar from on call plus machin at a time three times. but reading is came 3.5; 8.6; and 8.9 . why the reading is like that
because made in china 😀
Wrong year has been selected how to correct it
It was Doctor Oseiwe who cured me from Diabetes, you can also get in touch with him on TH-cam channel Doctor Oseiwe, if you need help and be cured completely🇬🇧🇬🇧
What’s the meaning of Error-8?
E-6 help
Hello, how much do you have on call extra glucometer strips? Can I buy strips from you?
Available with Amazon
77 mg/dL
mines chinese...this helped
I performed the quality control test well, it gave me a reading. But when I tried to do the actual sugars test, the machine first read pl then now I can't switch it on, what could be the problem? I just bought a new battery yesterday
U have which code of test strp??
same thing here,its frustrating,always goes back to date setting 😤😤😤😤
E-6 ERROR PLZ WHAT TO DO
Low battery it's
HI is high while LO is low
!!! DON'T BUY THIS THING !!!
While the lab showed the result 140, this thing's result 190!
PS: FDA margin of error is 20%.
Same happens with me
Its mean it show the result greater than Lab???
In display E 6
Please give the solution
Plz help e6 is disply
03424874393 in pakistan
Help me what should I have to do E6 is displayed not working plz whatts ap me 03424874393 pakistan
Whenever i insert strip it says E-4 error
Check on how you place the test strip. Just the tip should get into contact with the blood sample.
Watch the video at that exact time when the test strip is used