Thanks for the video ! With what are you showing and minute 7:55 I can find out why my car cranks but does not starts ? I have jump started it from a 2000A starter connected to the battery leads and I think this messed up something.
for diagnostics do you need a battery charger to maintain voltage? or is that just for programming and coding? i want to diagnose my car with ista d but i dont have a battery charger to maintain voltage
I have a Dcan and an Enet Cable for an X3 F25. I have Ista P and Ista D. Does the Dcan cable offer more options? I understood I could use E-Net on Ista D
Any ideas why my system freezes at Complete Identification Process exactly at "Overall vehicle test ( ABL-GES-etc....) // 02:27 . Then I have to close the operation and start again. Apart from that, software works as much as its possible without testing ECUs. Im using k+d cable with ista+ mottorad version. Thanks
I have the EDIABAS connection setup correctly (INPA works fine) and I have EDIABAS selected in ISTA-D, yet it is still unable to communicate with the car. Any thoughts?
@@mahdebmw6704yes, I had the baud rate set incorrectly. It did not really impact INPA aside from some little errors, but it prevented ISTA from working at all.
probably the best guide through ISATA on the TH-cam. Answered every question I was looking for. Good job, thanks man !
Bro, awesome. Thx for posting this! Best overall look through ISTA I’ve found so far.
yes, and only in D-can mode. K-can mode only works with pre 2007 cars. You have to switch your cable to D-can mode to read F series.
Thanks for the video ! With what are you showing and minute 7:55 I can find out why my car cranks but does not starts ? I have jump started it from a 2000A starter connected to the battery leads and I think this messed up something.
When you say battery leads - do you mean directly to the battery ?
Great👍
i have the enet cable...can i use that cable to diagnose and run a full test or do i have to have the dcan cable? i have a 2012 535i F10.
for diagnostics do you need a battery charger to maintain voltage? or is that just for programming and coding?
i want to diagnose my car with ista d but i dont have a battery charger to maintain voltage
Don't warry about battery , its only important when you do programming or coding. for the diagnostics you don't have to warry about battery
Can i reset my elv counter fault for mini cooper r56 with ista+ with k+dcan cable need help.appriciate your reply thankyou
I have a Dcan and an Enet Cable for an X3 F25. I have Ista P and Ista D. Does the Dcan cable offer more options? I understood I could use E-Net on Ista D
no its not. Dcan - for E series, Enet - for F series.
Una pregunta quiero igual utilizar k dcan en ista D pero no me reconoce el cable, hay que instalar más complementos?
So K+DCan cables do work with F series then? But only for diagnoses?
yes, and only in D-can mode. K-can mode only works with pre 2007 cars. You have to switch your cable to D-can mode to read F series.
HI,,, E53 3.0d can i replace used cluster using the conmtrol unit replacement function
Thanks, but my INSTA - D dosnt have kdcan option ?? Any idea
Mohammad Tawash you gota select ediabas when selecting interface type
hallo where you download the program
Any ideas why my system freezes at Complete Identification Process exactly at "Overall vehicle test ( ABL-GES-etc....) // 02:27 . Then I have to close the operation and start again. Apart from that, software works as much as its possible without testing ECUs. Im using k+d cable with ista+ mottorad version. Thanks
hallo where you download the program ,try bimmer version
Hi which K+DCAN cable do you use
I have the EDIABAS connection setup correctly (INPA works fine) and I have EDIABAS selected in ISTA-D, yet it is still unable to communicate with the car. Any thoughts?
Hello, did you solve the problem?
@@mahdebmw6704yes, I had the baud rate set incorrectly. It did not really impact INPA aside from some little errors, but it prevented ISTA from working at all.
What is wrong when it says it can't read car?
How's ISTA/D vs INPA?
why is my ista+ not able to code in new injectors
but she can if you have experience and also the right software and hardware.
the ista not show the battery voltage
MOJOS