How Much Did The Cr125 Build Cost?
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In this video, I reveal to you guys the total cost of the Honda Cr125 build. I also go over most of the main parts in detail stating what each of them would cost if you were curious what parts made up the majority of the total price tag. Before I talk about the cost I end up adding a couple new high-performance parts to the bike to take the bike to an even higher level. After I talk about the parts, I then make the announcement that the bike is going up for sale and will be getting sold in the next couple weeks. ( Stay tuned to the end of the video to hear the bike run with the new silencer installed. )
Help support the channel and shop my favorite tools at The D Zone- thed.zone/prod...
Instagram: adampaganelli
Email: Pagsli34@gmail.com
My Favorite Engine Tools- thed.zone/prod...
Costs:
The Bike 900.00 + 30.00 gas money
Wheels-
Warp nine wheels- 94.99 x 2 = 189.98
Spoke Sleeves- 20.00
Bearings rear- 19.99
Bearings front- 16.99
Tusk Rim lock red bling- 20.00
Rubber valve seals- 2.00
Tire mount lube- 2.50
Dunlop geomax front tire- 75.78
Dunlop geomax rear- 85.72
STI extreme duty motorcycle tubes rear- 13.97
STI extreme duty motorcycle tubes front- 12.97
Wheel hub powder coat- 40.00
Rear axle block- 18.99
Spokes with red nipples front and rear 68.39 x2 = 136.78
Total- 656.67
Brakes-
Tusk Brake Pads front and rear- 16.99 x 2 = 33.98
Tusk caliper rebuild kits- 15.99 x 2 = 31.98
Brake caliper piston- 18.45
All balls Master cylinder rebuild kits- 17.06 x 2 = 34.12
Brake lever- 5.99
Cerakote- 70.00
Front stainless braided brake lines- 44.99
Tusk rear braided brake lines- 34.99
Brake fluid- 5.00-10.00
Pro x rotors- 60.00 x2 = 120.00
Total- 401.50
Engine-
Lectron Carb 467.00
Phat head racing 300.00
FMF fatty pipe- 224.99
Muffler connecting seal- 12.00
New silencer- 127.54
V-Force 3 reed Valves- 141.99
OEM seals- 61.13
Shift Pedal- 19.99
No toil pre oiled air filter- 16.99
Radiators- 89.00
Tusk clutch plates- 48.20
Radiator hoses- 24.00 x 3
Wrench rabbit engine rebuild kit- 404.96
Cerakote- 35.00
Oem parts- 10.54
Oem parts- 24.68
Oil plug- 9.99
5 gallons race gas- 45.00
Coolant- 10.00
Original FMF silencer- free
Assembly lube- 5.00
Total- 2,078.00
Drive system-
Front sprocket- 8.99
Primary drive x ring chain- 66.07
Mika metals rear sprocket- 69.95
Total- 145.01
Suspension and steering-
Linkage bearing kit- 75.40
Upper shock bearing- 20.22
Upgraded rear swing arm and parts needed with it- 700.00
Upgraded rear shock- 750.00
Powder coating on shock- free
Cerakote- free
Shock fluid- 15.00
Grease- 2.00
Total- 1,562.62
Bars and triple clamps-
Clutch cable- 14.60
ASV brake away clutch lever- 114.99
Tusk alluminum gas cap- 29.99
Steering stem bearing kits- 45.22
Billet start stop switch- 13.99
New throttle housing cover- 17.28
Pro Taper grip glue- 7.99
Motion pro throttle tube- 8.09
Lock on grips- 23.99
Pro taper bars- 67.50
Total- 343.64
Plastics-
Polisport restyle kit- 103.99
Radiator air guides- 24.99
Cycra rear mud flap- 11.99
Graphics- 185.00
Polisport lower fork guards- 23.99
Throttle Jockey Seat Cover- 100.00
Total- 449.96
Miscelaneous-
Pryme mx cleaning wheels- 30.00
Scotch brite/ dremel bits- 45.00
Oem- 200.00
Bolt kit- 40.00
Shipping- 300.00
Total- 615.00
Grand total- 7,182.40
Music:
Rural Disturbance - Stacked
/ stacked
/ ruraldisturbance
/ @brosinsmusic
Rural Disturbance - Road Trip
/ road-trip-87bpm
/ ruraldisturbance
/ @brosinsmusic
Which part do you guys think is the best on the bike?
The rider because that's the dude that rebuilt ab old bike into a new amazing bike
Tires and rims/ all the powder coating work...Great job is an understatement! Cheers from Canada.
SWINGARM and rear Shock, and the powder coating. Oh yeah the graphics and the seat two. You know what? The whole f!@#$%ing bike! 😍
Can't even say bro you nailed the whole thing. Great work bro
I think you should do a ktm125 as your next build
Those Tusk and Primary Drive parts are looking good! Such a clean build. Good work!
Thank you 🤟🏼
It costs elbow grease lots of elbow grease and time plush effort I love your vids dude
That’s for sure! Thanks for watching
We need more youtubers like you and Cameron nimela
Beautiful hobby, but not a business model that will produce a profit margin.
Thank you for watching! Yes, this is not a business.
thats about what i spent building my 05 cr250. it would be so much cheaper if honda would start producing 2 strokes again!
That would sure be nice!
caseysniper308 I ride an 03 cr 125 and I wish they would come out with 2 strokes again.
Same price as a brand new 125 almost, but this is a lot cleaner, cooler, one of a kind factory looking bike. As an 03, it Possibly performs bettter, than say a new SX or YZ125, idk. I hate working on bikes, so this much blood, sweat, and tears building it would never be worth it to me.
You inspire me to work on my dirtbike I appreciate that. 😀
Happy to hear that man!
Wish i had one :/
@Quirin M. not worth it for me
@Quirin M. im a student so i dont have a lot money extra. And i just bought a car with takes most of my money. Id have the money to a buy the bike but dont got the money to ride it
Awesome build mate, I loved the series. It's unfortunate but restoring dirtbikes will always be a labour of love with very little to no profit in it. It is still an absolutely sick bike though.
I appreciate that. And you’re correct but it’s still definitely worth it in the end to see everything come together.
It’d be sick if you’d ever make a profit on it
I agree lol
One question, the total is 7182 dollars. Can you sell it making a profit?
a new motorcycle is worth over 8000
30 grand to build that including labor? Yeah bud, I think you might have overspent by about 26-27k if you ever expect a return from it. and that's if you keep it in the condition it's currently in. Saying that, immense build and a lot of time spent as well as money. It's not always about money, sentiment is worth a lot.
I never expected a return from this bike, I only wanted to see what I could create while showing you guys the process along the way. Very few restoration jobs are profitable even in the automotive world.
@@adampaganelli4891 now the real question is...how much TH-cam money did you make?
@Badass Skeptic I concur, then the more people who watch, like, subscribe and view also give them money via TH-cam payments. I guess at least some of these people give the bike away at the end to someone who would/could actually rip it - hopefully he does something similar and doesn't try to get 10k out of one of these silly kids saying that's what it's worth in the comments. I'm not at all fussed though, it doesn't effect my life but it's an odd world indeed sir.
Great work again! Have you figured out which phathead dome you prefer?
Thanks Vasily. It depends on the type of riding the higher the compression you will get much better bottom and mid range but you will loose a little off the top. Great for any track or situation where you are accelerating consistently. Did you put one on the shifter kart?
@@adampaganelli4891 Got you. I just ordered a black phathead with 2 domes :) but it will probably be a while before I test it out.
Cool bike, expensive but one of a kind. Then just beat the hell out of it for a couple years and you got a $3,000 bike if that
just like any dirt bike
Ryan Lorance not a hater just sayin
@@benlundgren3760yep its a expensive hobby lol but I love it
Why wouldn't you just buy a new bike for cheaper than what you spent on rebuilding that
You can’t buy these bikes anymore
Next video of you riding with Cr! \m/
I think it's more of a deccoration to him not something he should ride😂😂
Hey man I could use that turbine core do you wanna get rid or it? I’m doing a cr125 enduro build and need spark arester obviously
Came out great but silly waste of money
Beautiful build, didnt think it would be so expensive though.
We ended up doing a lot of aftermarket racing parts on the bike and that’s where a lot of the additional cost came from. Most of these parts were sponsored though
@@adampaganelli4891 price aside, still an amazing bike. And thats love that your getting sponsored. Digging the videos, and waiting for more✌
Great vid got my yz 250f built but the main jet keeps backing out I don’t know how to fix it
Everyone bitching in the comments obviously never done a build themselves. It's not about the cost it's about seeing it finished and looking as good as this does. I applaud you and your efforts great build 👏
Thank so much 🤟🏼
Awesome build bro! Loving all the 2 stroke rebuild videos from all the youtubers!
Thank you🤟🏼
Oooh daaaamn that pro circuit sounds crisp, knew it would sound better with a shorty on
Yeah it really does!
Anyone wanna sponsor me for some wheels for my 1986 cr500 restoration? Haha. But bike came out awesome man, love seeing this amount of work and detail going into a bike. I usually spend more time restoring bikes than I do riding. Spent a few months on my bike, didnt spend quite as much as this build but costs add up fast for sure. Hope to keep this bike for some time, everyone needs to own a 500 at least once in their lifetime haha. Hope to have a 125/250 like this one again soon as well. Long live 2 strokes!
Thanks so much 🤟🏼 the 500s are awesome!
you can get a 2019 KTM 150sx for less than that
You can buy a 2019 YZ125 for less too! FAR BETTER BIKE!
ADAM PAGANELLI CR125 REBUILD=PRICELESS
Thanks so much man 🤟🏼
Knolys Johnson facts I love watching this guy
What you plan on doing with the old shock and fmf I think they’d look great on my 96 cr I’m in the process of building and also in the process of recording my “tear down” video for my channel I hope to get up and running. I could really put those parts to good use. If you think they will fit my bike and would be willing to sell it, we could definitely do some business. Get back with me if you’d be interested. Also, Great video as always as I have been keeping up with this build from the start. Keep it up man. 💯💪🏽
Nice bike for sure but if I had that much money to spend on rebuilding a bike....i would definitely just buy a new one..i want to say that you may be hard pressed to get that money back if you sell it...still a sweet bike!
Loving these vids! Keep up the good work man 👍
Thank you so much 🤟🏼
hey
i just did buy a crf 250 2014mod and i have all red decals on it but i want to powdercote the frame red or black what shuld i do?
gamer prøys black, i think otherwise it would be too much
Yeah black
Black!
You have done a great job on this bike I am building a 2003 RM125 at the moment and am hoping for a similar result.
Thank you very much! I hope your build goes well.
Hopefully all goes well for you :)
Thanks mate 👍👍
Guy lost me at 30k
So basically the price of a new ktm 125 or a new 250 four stroke
Yes basically. Though that price has nothing to do with these other vehicles. Think of it as someone restoring a mustang. Someone puts 50,000 into a 67 mustang when they could’ve bought a brand new one for that price. It’s the nostalgia of a two stroke bike you cannot buy anymore that’s why it’s worth spending money on.
@2Stroke Tyson It is worth it, 1.) You can't buy a brand new one.
2.) He went through the WHOLE BIKE. Completely a new bike!
3.) It is Beautiful!
A job well done. I thank him for videoing the whole process.
My God.... Absolutely beautiful bike bro.. No corners cut!!
Thank you!
Came out great man
Thank you 🤟🏼
50 DOLLAR per hour, calm down boy.
Fantastic work! Congrats dude!
WOW i love it...I have a question...Is that a microwave where you put the suspension?...Sorry for bad english but i'm italian hehe
Awesome build love the bike i got 3 early 00s CR's myself what are the specs an info on swingarm looks like newer crf style
Thank you! Talk to newoemdirtbikeparts.com he will get you what you need
Boston is the guy
$7,182.40 is that how much the whole this would cost or $8,000.00
I love DiRt BiKeS
I'm really interested in how you learned to do what you do!? Did you teach yourself or go through an ATV mechanic school?
I think that Honda cr is a really good bike, but I don't know if it's better or no of another 125 for example tm 125. Anyone will be make a suggestion for me?
CAN U PLEASE TELL ME WHERE TO GET THOSE GRAPHICS! I have a cr125 AS WELL AND RLLY WANT THOSE GRAPHICS
RUN A RAFFLE FOR THE BIKE. $50 TICKETS (One per person) 200 TICKETS‼️
Could I get a link to that plastic kit I have a 1995 Cr 125 I am rebuilding and I really like that plastic kit
That’s a damn nice bike
Great video as always. You are the best! Greetings from Sweden
Thank you very much 🤟🏼
damn bro that's fucking expensive
Man that’s an amazing bike 🤙
Thank you 🤟🏼
can i get a link to the graphic kit
Same!
Quanto vc me cobra num motor feito por vc e manda pro Brasil estado de Curitiba Pr
I got a 05 cr125 what all do I need to upgrade the plastics to a newer look like this one?
TU MAĆ
sick bike but nobody is going to want to spend 10k on a 16 year old bike
Unfortunately you’re probably right
Adam Paganelli lol
Yeah but nothing on the bike is 16years old. It's all new. The only thing that is 16 years old is the title
Witch do you think is cheeper to do a complete rebuild on a cr85 or a crf 100 those are just examples but I think personally 4 strokes are a bit cheeper I'm doing some mantince on my cr85 and it has cost me alot of money i dont have a crf100 but anyways what do you think is cheeper to completely rebuild like you did to your cr125
4 strokes are way more expensive to rebuild than a 2 stroke and more complicated.
Lol 4 strokes are literally 4 times more expensive
@@Adam86br but the thing you have to remember is that you need to replace parts so much more often on a 2 stroke then 4 stroke I guess its just the difference you need to live with like you have reeds,cluch,piston, stuff like that on a two stroke and on 4 strokes also but you need to replace them more often on a 2 stroke I've had the same piston in my 4 stroke sense 2004 and that's the year it was made lol
Wtf... More than 350gran on our currency... Wtf...
Where can I find a 02 to 03 cr125 power valve?
Hey dude! Hey dude! Would you mind telling me which torque wrench did you use? Greetings from Portugal
Eastwood
11:42 is what your looking for thank me later
Good work pal, a labour of love , would be good if can lets us know how much she sales for
Thanks for watching!
how much did all the powder coat stuff cost to start?
How did u get your frame like that
Job well done. Very sweet bike!
Can’t believe all the haters commenting “just buy a new bike”.
Obviously they don’t get it.
New sub
Thanks for watching, I appreciate it🤟🏼
I aggree. Haters say stupid shit.
$30,000 bike... behave 😂😂
This is the estimated cost of the bike not the value.
Nice ☺😊😊
What is the brand of the radiator?
Nice first gen dodge
nice build
Moto Boys thank you 🤟🏼
I won give me. The bike plz
I mean. The bike came out amazing! But I build KTM bikes for a living. And I'd get a new 125 SX for 5500 including taxes. So that's a no brainer.
Nice work! It's beautiful. You should be proud of your work!
Thank you Jim!
Please subtitles in spanish!!!!!!!
Now it's too pretty to ride......
Nice bike bro 👊🏽🔥🔥
Thank you! 🤟🏼
Nice job.
Thank you very much 🤟🏼
some cant see that getting a 250cc dirt bike for $700 ends up costing $5'500 to get running good and $18'000 to fix up for a show. some people get snappy and say things as if they could do the work themselves, so they don't want to pay for time... ''thinking verses doing'' they think of doing it but they think to much, that leads to thinking that they can or have done it... then you get guys that show up to the work site... they say they know what they are doing, but just like the bachelor sweet they rent... everything sits in a pile of other rusting metal for 20 or more years before they finely do anything with it.
Hey everyone post and link vids of you cross threading the living $#@& out of your hardware using impact drivers all the time....
Hello, can you tell me if it is possible to find a cr125 piston in the 55 mm measurement?
I await your return, as this is difficult to find here in Brazil
I've Got a 98 KX 125 for your next project 😂 excellent work man!! wish I had the time to restore mine!
Does he live in Baltimore
I do not
Great vid man. Thanks for the data.
No problem! Thanks for watching 🤟🏼
You believe that shock is an upgrade 🤦🏻♂️
That's a crazy cool build! Looks amazing!
Can I have the old one?
That bike is nasty!
The shorty silencers cause loss of over rev and top end. Turbincore is non restrictive,. More over rev and top end
Any tips or tricks to putting the silencer into that rubber gasket. I see it looks like you added a grey anti-seize
You could have had a brand new 2019 KTM 150 SX and would have been a better bike.
why run your clutch cord in front of the number plate>?
That's how it's routed, per the factory.
Wow nice color
Are there any videos on how he did the upgraded brakes and swingarm?
Is this dude Tony Soprano's kid?
That lawn is huuuuuge. Takes as long to mow that, as it does to build this bike
What kind of oven is that you use the ones I find for smaller atv parts dont heat up hot enough
I wish i could do this to mine but too much money for me right now great build
If I didn’t just buy a Harley I’d buy that off you.
Bro what websites you go to to order bike parts?
8k and it's still not a Yz wheels are trick
Very nice build .. great job
Very nice bike !
Thank you very much 🤟🏼