i have that Flight controller and i have skyzon Sky02 goggles with 3D camera + Transmitter. but i have no clue how i get the OSD signal from the FC and in to the Transmitter for the camera
Do you actually need to connect the ground to the FC? So If my cam has 4 connections (Video out, Audio out, ground in, and 5v in), do I connect the video out and ground to FC and then just supply the cam with seperate voltage? Or just use the cam in and cam out and ignore the ground? Thanks!
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
can you pls help me with this fc ? all is fine but when i connect my lipo the configurator stops working ...what i have to do ?thanks
hi guys only the 1.3 version contains the exe file but works on the 64bit pc fine
how you flash the board...using the same osd ftdi adapter? or need different ftdi adapter?
same
i have that Flight controller and i have skyzon Sky02 goggles with 3D camera + Transmitter. but i have no clue how i get the OSD signal from the FC and in to the Transmitter for the camera
where those to yellow filter are the say cam in and vtx out with ground, so you plug the cam into there and the vtx where it says
so i will just connect the camera to vin and vout to the video transmitter ?
yup
Hey, do you have wiring guide for this board? I cannot find :( I'm new in this world of drones
Rodrigo Siviero under the board should have everything labled, what it what.
I also have this board and have the exakt same problem as Timppa Boiii any idéas?
idoff1 you should make sure that you followed step by step on how to get the arduino reading the board and the mwosd gui reading it as well.
how to get the gui to open in windows 10?
same problem
but how do you get the osd on to the goggles. ?
theres a cam in and a vtx out on the fc.
Do you actually need to connect the ground to the FC? So If my cam has 4 connections (Video out, Audio out, ground in, and 5v in), do I connect the video out and ground to FC and then just supply the cam with seperate voltage? Or just use the cam in and cam out and ignore the ground? Thanks!
blakebiscotti you can ground it on the flight controller or just on the pdb its self.
blakebiscotti as well as you still need to supply the vtx and cam with its designated voltage
Sweet thank you. I am going to just do it to the PDB the ground on the FC just through me off.
Worst FC out there avoid. I had 3 all failed stick with Omnibus Corner but buy genuine.