TRAXXAS XMAXX 8s tools and parts and upgrades diff oils, you will need to get started
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- TRAXXAS XMAXX 8s tools and parts and upgrades you will need to get started differential oil, pinion gear, spurs gear, bearing oil, rpm body saver, arrow max power tool tips, rpm override rear axle carriers, rpm threaded hinge pins, and tips for owning a xmaxx
Yeah you definitely don't have to touch that truck Perfect Right Out of the Box✌
I'm going to definitely need to get these upgrades, I got the bluetooth piece for the controller and loved it!
You should! the Bluetooth is good, just so you know when setting your end points for steering turn the tsk on the controller off
tsm sorry
please subscribe thanks I just subscribed to your channel every little helps
Vitavon are the best hubs you can buy. Highest quality made oversized triple bearing front or rear $200 for a full set of 4.
thanks will take a look please like and subscribe pal
Liked and subscribed from india!
I recently owned xmaxx so gotta need some help too to maintain it good
just jump it again that often can bend it back a bit let me know what you find
nice
I cant get over how cheap feeling the controller is.. I could understand if it was a £300 car but for over £1000 it a bit of a joke. Same goes for the other standard electronics to be honest.
Nice video ! Very detailed 👍🏽😊
Thanks! 😊
Awesome video broo 👍👍🤩
Thanks 😁
please subscribe as I have for you just trying to get the channel started
@@domesticcardetailing8295 no problem bro, thanks for the support, I subbed you to 🤩👍
what do the bearings do in terms of difference when upgrading to rpm? does it make the wheel roll alot easier? orrr? why is bigger better?
Did you replace all four sets of hinge pins? Thanks
Can we get a link to the hex driver kit?
Recently while showing off my xmaxx I just left it to floor from standing it did land perfectly on wheels but heard chassis hitting the ground hard and now
I am hearing a clicking or cracking sound when I push the car in forward
I don't hear tht sound when I pull it back.
I removed and checked front and rear diff and even spur nd pinion gear everything is intact!
Any idea? Wht must I been screwed up?
I think it will be your drive shaft they bend on hard landings. turn the car over unscrew it and spin it. if it’s got a wobble it’s that it’s fine it will do no harm as long as, it’s so bent it ain’t spinning freely
Do you have to lube the spur when taking out the box ? Also anything else I should do before driving it out?
Also when putting the 6449r and 6491r. Will the pins need to be moved or is it the same at before? Thanks
you won’t need to lube lube them
it’s just a straight swap they fit, just on the pinion gear make sure you screw the grub screw down on the flat part of the motor shaft with blue loctite
please like and subscribe more vlogs to come
Thankyou ever so much !
The old saying don't fix what ain't broken
Can you use that Traxxas blue tooth module with a different radio?
sorry I have never tried or had a need to as I just run the Traxxas radio.
How many thousand screws are ther?
not sure not gonna count t.hem but there’s a lot