Thanks man. Used your video, among others to completely replace the stock stereo and speakers (Nissan Almera N16, same thing). All went well, taking extra care with the rather flimsy panels. Now I've got a nice stereo in a crappy car :) Really need to be careful with those panels. I found the driver side was rather banged up and damaged, when the window got smashed and then replaced by a 'professional'. So yeah, take your time and be careful!
hi dear, can u connfirm the size of the door speakrs, is it 6.5 or 5inch. also what did u do for the back rack speakers, are the replaceable with the 6x9 inch cheap speakrs easily
Hopefully this’ll help me be able to replace the speakers on my 04 Sentra… I had a feeling it wouldn’t be difficult.. but I don’t wanna f it up. Im desperate for a new stereo system
Felix Bonilla Yes, that is correct. But, there are a few things you should know. You cannot put in new speakers without speaker adapter plates. If you go and take out the old speakers, you will find that no 6.5" speaker will fit the three holes. They make ABF plastic adapters for these speakers, so you can just drill a hole and insert a screw and your good. If you watch my channel, I'm redoing my 2001 Nissan Sentra's sound system, gonna be badass. I will be replacing the door speakers with the adapter plates, so i will show how to do it properly.
Brony Bassheads Can you change the rear speakers instead because I got the gist of how to change the door panels. The next thing I need to work on is the rear speakers which in all isn't hard to do fullfill just need a tutorial on how to get there.
Yes you can, I'm going to be replacing them soon, I'll have video and everything of me redoing it all. The rear are a bit more challenging though, be warned. There are more pop pins to take out of the back plates. There is old insulation that makes a mess. Stay tuned to my channel, I'll have a video soon.
naviddivan yeah it worked for me. I got some foam speaker cups for the rear ones. My front door rattles a little tho I’m not sure if it’s because I need a foam cup for the front or if I just installed it wrong
elchucofried What mountings? There's no cut required, unless you want to replace the speaker grills. You need special speaker brackets (Connects2 CT25NS01) to fit after market speakers (I got Focal 165AC, but didn't installed the grills).
3dbrother You'll need to re-wire to the speaker, as they use proprietary connectors, and not the standard audio connectors. No big deal really. Bit of soldering, crimping, heat-shrinking.
![[페이스캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FaceCam) @SBS Inkigayo 240707](http://i.ytimg.com/vi/x9VRNTV4VDI/mqdefault.jpg)
![[안방1열 풀캠4K] 베이비몬스터 'FOREVER' (BABYMONSTER FullCam)│@SBS Inkigayo 240707](http://i.ytimg.com/vi/_2HL-ogzzBU/mqdefault.jpg)
Thanks for the help, friend!! Couldn't have done it without ya!
Awesome video man, really appreciate ya! Straight to the point, instructions are clear, and it's easy to follow. Right on!
Thanks for tip, It really helped me before I took the panels apart.
"GIVE THIS MAN A BEER!"(Stone Cold voice) 🍻
Thank you this will help me to install my new speakers in my 2001 nissan sentra.
Thanks man. Used your video, among others to completely replace the stock stereo and speakers (Nissan Almera N16, same thing). All went well, taking extra care with the rather flimsy panels. Now I've got a nice stereo in a crappy car :)
Really need to be careful with those panels. I found the driver side was rather banged up and damaged, when the window got smashed and then replaced by a 'professional'. So yeah, take your time and be careful!
hi dear, can u connfirm the size of the door speakrs, is it 6.5 or 5inch. also what did u do for the back rack speakers, are the replaceable with the 6x9 inch cheap speakrs easily
Short and sweet. Thanks.
Very helpful ! Thank you.
thank you so much, I will get hand-ons today! I hope.
i have the sentra 2006,, i need some help,, what color is the wire that powers up the stock rockford fosgate amp,, i need to disconnect it,,,
this is the guy, we all need a dad or an uncle like this.
Thank you do much. Great !!!!
I would have liked to see the install of the aftermarket speakers you put in their..
Nicely done, it’s the rear deck to change out speakers on these Nissan’s that’s a nightmare for me.
What's the difference between those nissan sentra 00-06 and nissan sentra 1999? Can I do the same to my b14?
Thank you so much.. I am going to change the speaker to after market speaker..and wonder how to open up the door panel.. thanks man
Thank you!
Hopefully this’ll help me be able to replace the speakers on my 04 Sentra… I had a feeling it wouldn’t be difficult.. but I don’t wanna f it up. Im desperate for a new stereo system
Thanks ,. ...rear speakers?
Thank you is the same panel of the nissan almera (my car)
merci beaucoup
Thanks i need to replace the same speaker on my sentra
Tq
Thanks broooo
Do you know the max depth of the speaker that will still fit?
did you finally find an answer?
Hendrik B. no I need to know too
For doors Doors: Technically, it's a 6.75" speaker hole, but it's only 1.9375" deep, so your options are very narrow.
You think kenwood kfc-1693 ps speaker will fit?
And the back speakers??
The right fit for an aftermarket to fit in a 02 or 01 nissan sentra is 6'5 correct?
Felix Bonilla Yes, that is correct. But, there are a few things you should know. You cannot put in new speakers without speaker adapter plates. If you go and take out the old speakers, you will find that no 6.5" speaker will fit the three holes. They make ABF plastic adapters for these speakers, so you can just drill a hole and insert a screw and your good. If you watch my channel, I'm redoing my 2001 Nissan Sentra's sound system, gonna be badass. I will be replacing the door speakers with the adapter plates, so i will show how to do it properly.
Brony Bassheads Can you change the rear speakers instead because I got the gist of how to change the door panels. The next thing I need to work on is the rear speakers which in all isn't hard to do fullfill just need a tutorial on how to get there.
Yes you can, I'm going to be replacing them soon, I'll have video and everything of me redoing it all. The rear are a bit more challenging though, be warned. There are more pop pins to take out of the back plates. There is old insulation that makes a mess. Stay tuned to my channel, I'll have a video soon.
What about 6'3? Will it be fine for that size?
Speaking of size, what is the size of the stock one?
Nevermind I find out
So can I use 6.5 for all 4 speakers?
Cómo se desmonta pero de un sentra 2008? please
Can I get a 6.5 inch speaker for all 4 speakers? The rear is 6.75 inch but will a 6.5 fit and work?
Hey did the 6.5 inch speaker worked? I'm about to change mine as well, I appreciate if u can confirm
naviddivan yeah it worked for me. I got some foam speaker cups for the rear ones. My front door rattles a little tho I’m not sure if it’s because I need a foam cup for the front or if I just installed it wrong
@@bayarea4153 thank you, yeah you probably need some foam cups, u can cut the foam off of your old speakers and place it ob ur newly installed ones
Oh, I didn't know the rear speakers could be a little bigger. What speakers did you use?
❤️
How do you cut out the mountings??
elchucofried What mountings? There's no cut required, unless you want to replace the speaker grills.
You need special speaker brackets (Connects2 CT25NS01) to fit after market speakers (I got Focal 165AC, but didn't installed the grills).
really helpfull
😊👍
thanks ,helpful
Thanks, I was wondering how to replace the speakers without spending extra money on electrician.
What is the size of speaker?
Doors: Technically, it's a 6.75" speaker hole, but it's only 1.9375" deep, so your options are very narrow.
@@aeperformance48 do you recommend any speakers that would fit in a 2001 Sentra?
Thanks, I was wondering how to replace the speakers without spending extra money on electrician.
3dbrother You'll need to re-wire to the speaker, as they use proprietary connectors, and not the standard audio connectors. No big deal really. Bit of soldering, crimping, heat-shrinking.