What happened with the third speaker? The one inside the little box?. He didn't put it back again, just the two ones wich are together. Otherwise, nice repairment work
Hello, good, I have already looked for the measurements of that drawer and I have not found them. Could you please provide me or on which page I can find them in advance, thanks😊
I just ordered one from good will i want to take apart its the one with a folded horn not port tube i take it there all glued together always though bose was well poor but its only my opinion i have a home made 12 inch i made my self man does it put out the bass only 100 watt amp but bose is or was interesting .
My box too has to be repaired. The front cover is come off so I have to fix with glue. The original glue was orange in colour. Also there was a sponge piece inside the box behind the front cover , measuring 150mm x 150 mm which is totally in poor condition. What type of foam/ sponge is this , plz advise so that I can replace it ? Can you also advise what type of glue have you used , is it liquid silicon glue or something else ?
@@nikunospeakerboxmaker6614 Thanks for your reply. I am not located in Phil. But could you plz suggest the type of foam used, it’s location within the woofer and what Type of wood glue should I use to secure the front panel.Thanks in advance
The Acoustimass 10 has an extra woofer in the front section for handling the signal from the center speaker and left/right surround speakers. Otherwise it is similar to the Acoustimass 5 which is a two-speaker system (left/right only).
i saw on hexibase's channel that with 6th order the frequency response in characterized with a prominent plateau with a dips on both ends of the operating band: that extra woofer works as a 4th order and the whole unit creates a "6th order series offset hybrid bass reflex" extending the performance well into the midrange.
Nicely done... What kind of wood did you use? Will the wood used to make car subs do? Also just wondering.. Can the box be made a little shorter? (current length is 22 inches.. Can this be shrunk to 17 inches?.. Just checking as the bass box is currently bigger than my entertainment unit) Cheers mate
Brilliant video and great craftsmanship and better than the workmanship Bose had originally made!! Have subscribed and obviously given a ‘like’ to your great upload and thank you for the inspiration as got acoustimass 25 sitting about and I have plans to wire up and change amp to make a one of a kind subwoofer, more powerful than the original.
@@theumeshkumar09 .75 mm MDF is the same as ¾ inch MDF (here in America). It's THE most common thickness of MDF....so THAT size isn't available where you live?
@@nikunospeakerboxmaker6614 Thanks for your prompt answer. Google search only gives the outer LxBxH but to be able to copy the box , we need internal measurements of distances and tube measurements. Next time please note down the measurements.
You probably don’t have one of these Acoustimass units. Probably never had one, at least with the cube speakers. You are probably thinking about bass with this speaker. This is not a woofer. This in conjunction with the cube speakers that came with it makes a speaker system. In simplicity, if someone has the 2 channel setup, they will place one speaker on left, right, and the big one in a variety of places/positions. The visual observation would show 3 separate speakers. If setup pretty close to correct it would sound like there was 2 tower speakers. The cube speakers are taking care of the high, and mid high frequencies, and the Acoustimass, works the rest of the frequencies being played. So, instead of a bunch of big speakers all over the place. The lower frequencies are all in one location, while the cube speakers are the only ones that need to e spread out. Thus, this is not passive woofer, this is part of a speaker system.
@@johnsimun6533 it’s a passive subwoofer where the crossover is set to higher frequencies? It still produces the low frequencies of the subwoofer but is harder on your receiver/amp.
You have to admit that he does a very skillful job and that it’s worth sharing the techniques on TH-cam. I think it would have been wise to recap the crossover though.
Tat van is sick bro !! Im in the USA , and ppl would go nuts for that van !
I want my bose acoustimass 6 to be checked and restoration... thanks i found you in YT.
I have two of those running off a Kenwood power amp after a dbx subharmonic
Very Good job Bro!. Please type all details box size and woofer size to make new.
What happened with the third speaker? The one inside the little box?. He didn't put it back again, just the two ones wich are together. Otherwise, nice repairment work
Hello, good, I have already looked for the measurements of that drawer and I have not found them. Could you please provide me or on which page I can find them in advance, thanks😊
Hello, the black material with which you upholstered the last one, what is it called? Thank you
I just ordered one from good will i want to take apart its the one with a folded horn not port tube i take it there all glued together always though bose was well poor but its only my opinion i have a home made 12 inch i made my self man does it put out the bass only 100 watt amp but bose is or was interesting .
Good job👍
My box too has to be repaired. The front cover is come off so I have to fix with glue. The original glue was orange in colour. Also there was a sponge piece inside the box behind the front cover , measuring 150mm x 150 mm which is totally in poor condition. What type of foam/ sponge is this , plz advise so that I can replace it ? Can you also advise what type of glue have you used , is it liquid silicon glue or something else ?
if you are located in philipines you can send it to me to replace the box and restore the original look. message me at my facebook page
@@nikunospeakerboxmaker6614 Thanks for your reply. I am not located in Phil. But could you plz suggest the type of foam used, it’s location within the woofer and what
Type of wood glue should I use to secure the front panel.Thanks in advance
The Acoustimass 10 has an extra woofer in the front section for handling the signal from the center speaker and left/right surround speakers. Otherwise it is similar to the Acoustimass 5 which is a two-speaker system (left/right only).
i saw on hexibase's channel that with 6th order the frequency response in characterized with a prominent plateau with a dips on both ends of the operating band: that extra woofer works as a 4th order and the whole unit creates a "6th order series offset hybrid bass reflex" extending the performance well into the midrange.
What bose speaker is that? I never seen 3 woofer
i like youre van ....do you have movies from tat van inside and soundsystem ?
boss magkano po parepair ng ganyan? bose acoustimass subwoofer din po
Idol xmax 12 sub 28/ 14 / 16 po l ported ano po port sa loob haba at inch dapat
Sir gud evening lumobo din un speaker ko module parehas b Ng plywood acoustic mgkano p repair
loc mo sir? pagawa sana ako ganyan din
Hi, Can you give me an internet link to buy the black film to replace that of my Subwoofer? (if possible the same as Bose Original)
Hola cómo se llama el plástico o material negro con el que lo forras al último?
San po ba loc.nyu boss?
My Bose system is screwed up. Don’t know where to start. Interesting video
glad to give you an idea. please do me a favor hit subscribe. thank you very much!
Probably bad caps on the crossover. I can’t think of what else could go wrong.
Nice Sub. Box Restoration Sir.....
Nicely done...
What kind of wood did you use? Will the wood used to make car subs do?
Also just wondering.. Can the box be made a little shorter? (current length is 22 inches.. Can this be shrunk to 17 inches?.. Just checking as the bass box is currently bigger than my entertainment unit)
Cheers mate
mdf board i use.... you have to follow the exact dimension otherwise the sound will be different from original box
Brilliant video and great craftsmanship and better than the workmanship Bose had originally made!! Have subscribed and obviously given a ‘like’ to your great upload and thank you for the inspiration as got acoustimass 25 sitting about and I have plans to wire up and change amp to make a one of a kind subwoofer, more powerful than the original.
thanks alot bro!
Hello po sir good day saan po location po mayron po sana akong pa restore na acoustimass 5 series ll Bose.😃
Nice work bro.. congratulations
thanks boss
Probably sounds more solid
You´re the Master!
thanks mate!
what
Model is that
saan ba location ninyo Sir..
Where is the location of your shop?
thank you amigo
Good job but dont wear sandals when wood working please
Nicely done
thank you...i have done another one of this will pod=sted it soon
What kind of glue you used to stick the front cover? I really want to know coz I need to fix mine. Thank you in advance sir. Nice video!
just an ordinary wood glue called STIKWELL
Saan address nyo sa Pinas
Side origine!?
Where is your loc.
dasma cavite sir punta ka lang sa fb page ko pm mo ako for inquiry na sa channel ko ang link sa right corner ng banner. tnx!
Which woofers had dual voice coils? All 3?
only 1 sir
What is the thickness of the MDF Board you used ?
.75mm
@@nikunospeakerboxmaker6614 I am sorry but it is not 0.75mm. MDF is not available in this size. Please tell me if it is 11mm or 17mm or 25mm ?
@@theumeshkumar09 .75 mm MDF is the same as ¾ inch MDF (here in America).
It's THE most common thickness of MDF....so THAT size isn't available where you live?
More details for the materials
is this have better Materials than the original?
yes, because the original box is made of particle boards
Boss Anong size ng speaker ng tatlo ng Bose lifestyle 5
Sir San location nyo
Meauserements?
❤❤❤🎉
Your long air pass pipe is in wrong position ☺️ long side is in seal subwoofer side it's right
you put the vinyl wrap joint at the top not the bottom :O
Hi Sir im your new dubscriber.. i want to know where's your location.. . Thank you ..
Oye podrias darme la medida es que pienso hacer uno gracias
Hola sabes las medidas gracias
How much speaker box mo
Could you please share the measurements and box diagram ?
its the same size as the original box
you can find the exact measurement of bose acustimas via google serch
@@nikunospeakerboxmaker6614 Thanks for your prompt answer. Google search only gives the outer LxBxH but to be able to copy the box , we need internal measurements of distances and tube measurements. Next time please note down the measurements.
Sayang sekali, Tutup Box belakang kurang rapi 😌
I don´t like this Bose Sub (passiv)... i would build
in a Amplifier!
its your choice mate we cant blame those person who owned those kind of system they like it!
You probably don’t have one of these Acoustimass units. Probably never had one, at least with the cube speakers. You are probably thinking about bass with this speaker. This is not a woofer. This in conjunction with the cube speakers that came with it makes a speaker system.
In simplicity, if someone has the 2 channel setup, they will place one speaker on left, right, and the big one in a variety of places/positions. The visual observation would show 3 separate speakers. If setup pretty close to correct it would sound like there was 2 tower speakers.
The cube speakers are taking care of the high, and mid high frequencies, and the Acoustimass, works the rest of the frequencies being played. So, instead of a bunch of big speakers all over the place. The lower frequencies are all in one location, while the cube speakers are the only ones that need to e spread out.
Thus, this is not passive woofer, this is part of a speaker system.
@@nikunospeakerboxmaker6614 great video, keep them up.
@@johnsimun6533 Oh, okay! Thank you!
@@johnsimun6533 it’s a passive subwoofer where the crossover is set to higher frequencies? It still produces the low frequencies of the subwoofer but is harder on your receiver/amp.
Boss taga saan k pwede b pagawa ko
dasma cavite sir pm mo lang ako sa fb page ko
Mgkano kaya aabutin. Pag paayos ng ganyan
boss pakireply naman sa pm ko
Nicely done but why even bother restoring a piece of junk of a woofer.
thats what you called value of the junk lol!
Huy Le “One mans junk, is another mans treasure”!!!! @Huy Le Everything has a value but from your comment, I don’t think you will understand!!!!
You have to admit that he does a very skillful job and that it’s worth sharing the techniques on TH-cam.
I think it would have been wise to recap the crossover though.
Bose sucks at reliability at 90s
well we cant blame those owners they like it thats why they want it restored when the box is broken damage
Hello, the black material with which you upholstered the last one, what is it called? Thank you
How much speaker box mo
pm mo ako sir sa facebook page ko
Hello, the black material with which you upholstered the last one, what is it called? Thank you
Hello, the black material with which you upholstered the last one, what is it called? Thank you
Hello, the black material with which you upholstered the last one, what is it called? Thank you