TaoTao TBR7 35T Sprocket Upgrade
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Since getting the TBR7, my biggest issue has been its top speed. I may have lost some torque by doing this...but come on...A cruising speed of 55-60 is perfect for the roads. Enjoy the little video. 42T sprocket had 58ish mph @ 6k RPM while 35T has 65ish @ 6K RPM.
I live in south jersey and I was able to register mine👍 I use it to commute to work. I did all of the mods and I love mine! Close to 6500 miles already. With all of the mods I have hit 74.
17/43 sprockets
Mikuni carb 115 main/22.5 pilot
Nibbi coil
E3 spark plug
Exhaust
Running rottella T5 oil
Pro taper bars/ grips
Fog lights
Oil cooler
Oil catch can for blow by and a cone filter. ( I don’t use the air box)
Better clutch springs
It runs great, I have about 2300 into it.
Mine is blue 👍
The only thing that I have changed so far is the nibbi coil ($15)
I do oil changes every 1500 miles and adjust valves every other oil change if needed.
Have you ever hopped on 295
Yes, obviously staying in the right lane. Staying at 65. I now have 7500 miles on my bike👍
Only on for about 5-10 miles. I normally keep it at 63mph. I have a 45 minute commute at that speed most of the time. I don’t care if people pass me, I can get the bike to 74 but it is screaming and I don’t like to keep it there.. 63 can go all day long
@@keckerson6396 I just brought a tbr7 and I used to live in Camden but moved to voorhees so I really can’t ride her around not having a tag I got a temporary on for now and it has some upgrades to it cdi box exhaust spark plug I’m gonna order a nibbi carb for it and I do have a sprocket that came with the bike but for some reason it just stays at 60 on the gauge and she was screaming
Did you change your sprockets? I’m running a 17/43. The set up is more for top end speed. it won’t have as much Low end torque. But I wasn’t looking for that.
I run a 17/42 on my bar Raven, and it seems like the ideal setup. Comfortable at 55-60, and still enough torque to top out 5th. Top speed now at 75 mph when pinned 😁
I’ve swapped back and forth from 17/42 and the 38. Depending on where I need to go. I have the 450ss for the longer rides now
@@brianreynolds4153 nice 👍 I wanna get a kpx 259 for my next bike and turn it into a sumo for the longer rides. I wish I could do it with a klx or a CRF, but I'm too poor to afford a new one like I can with the lifan being half the price 😅😅
i did all the mods to mine as well 17t front 43t rear, 28mm nibbi carb, and exhaust and ive gotten it to 76 mph but it took a lot to get there. 60 mph is its sweet spot, I have the 300cc cylinder that im yet to install....loving the bike
Do you have the link to the 300cc? I been looking for one but haven’t pulled the trigger
@brianreynolds4153 i bought it off of ebay. I looked this morning but the seller who whole is unavailable. If I find another ill post the link for you
Actually of course
6 speed or 5?
It comes with 5 gears stock
Sweet thanks
What front sprocket are you running?
Sorry for the late reply. I have a 17 tooth in the front. The 17 does not have clearance issues but any bigger will
@@brianreynolds4153 I'm runny 17t front and 43t in the back. Seems to work very good
Where did you get the sprocket ?
Here are all the Amazon links for the sprockets I have bought:
JT Sprockets JTR269.35 35T Steel... www.amazon.com/dp/B000GTV5U4?ref=ppx_pop_mob_ap_share
JT Sprockets JTR269.42 42T Steel... www.amazon.com/dp/B0068O5N5Y?ref=ppx_pop_mob_ap_share
JT Sprockets JTF259.17 17T Steel... www.amazon.com/dp/B004DNA0KA?ref=ppx_pop_mob_ap_share
Thanks. @@brianreynolds4153