They used to put these on all screwdrivers many years ago. They had a pair of spring steel tabs that pulled forward over the end and held the screw head just like these do.
There were other high quality screwdrivers that had metal clips on the screwdrivers decades ago . I still have a few . One was used for the screws on the points & condenser inside the distributor on a vehicle . 😁
Robertson is so superior it hurts. Have a job assembling furniture once, notice that most of the Phillips screws are designed to also accept a Robertson bit-and that work moves three times as fast if you toss the Phillips bit in the trash where it belongs. Dang Henry Ford wanted exclusive rights and Robertson wouldn't give it to him, so that's why the US is cursed with the worst possible screw head pattern
Robertson system has a certain amount of trouble with the square end breaking off due to stress concentration. Torx and Allen have mainly eliminated this.
@@joelee2371 Allen screws strip for me constantly. That's just anecdotal, but torx is infinitely more reliable for me. Robertson seems good, but I haven't ever had to reuse those screws, so I'm not sure how they hold up on repeated use
Imagine me on my first day as a fitter helper watching my brand new sexy billet empire level fall to the ground, slipped right off the stainless pipe I so confidently left it resting on. I learned a valuable lesson about metallurgy that day.
Wait you mean they had magnets and springs in the ancient 1950s?! But yeah it's pretty amazing how commonplace a ton of useful designs were, yet they get forgotten and re-discovered every few decades anyway.
Yup, i have used them, great on non-magnetic screws. Made made by Vanco and Xcelite, and still available. Look under "quick-wedge" they even make them for Phillips screws.
likely mostly americans. I saw a thing on this and the superior robertson was about to take over but something about the war starting pushed it back, everything went phillips in the war machines...and the rest is history. Over the years, I've gone through 2 friend's (long time US residents and households), and it wasn't until just a few years ago that i realized none of their multibit hollow-handle style screwdrivers had robertson bits.
@littlegoobie I believe ot had something to do with Ford. There was some falling out and he booted them out of the factory. Phillips was brought it to replace them. I remember doing some research on this a while ago, but can't remember the exact details
Wasn't the Phillips head developed to prevent workers from over tightening and stripping screws? I read that long ago and though how dumb now instead you get stripped bits and stripped screw heads. I'm not even familiar with the Robinson though. Glad you brought it up so I can now go research it. Currently I use torx as my screw head of choice
Torx are the current answer to this problem, and they aren't tapered so they don't strip easily. Not sure if Robertson can withstand more torque or not, but I've never had a problem with Torx
I like the DeWalt version of that magnet bit more. I have both and used them frequently. The DeWalt Phillips bit has a detent at the front, making the magnet choose one of two positions. The "forward position" makes it butt up against the back of a screw, maintaining perfect alignment every time.
My dad was an electronics tech when i was young , in the 60, and had a standard screwdriver with that spring loaded attachment in steel already on it , it is nice to see that you don’t have to buy the specialized screwdriver to have that added option.
I have several of those. Mostly in straight edge. I also have these skinny twist things that moves a little bar at the tip that work pretty well. Again only in straight edge. And who uses slotted screws if they dont have to? Except my dad. He hated Phillips heads because they strip out easily.
One of the primary reasons I've switched to Torx head screws for nearly everything I do. Aside from being far more strip resistant, they also tend to stay locked onto the bit well enough by themselves, as long as you aren't slinging your drill around. They do cost a fair bit more, but are genuinely worth it in most cases.
It usually depends on the alloying elements (percentage of Chromium). Austenitic stainless is not ferromagnetic at all such as your 300 series stainless steel. Martensitic and ferritic steel is either fully or slightly magnetic (paramagnetic). 400 series stainless steel is slightly magnetic. Interestingly, you can reintroduce martensite to an austenitic steel through cold working.
@@jaygraham5407the "quality" has nothing to do with it; it's about the alloy mix and the processing/manufacturing methods. There are many stainless alloys, for many different purposes, some more or less magnetic than others. Source: Wikipedia and manufacturers' web sites.
@@ericpalmer2831 Well explained. As a Chemistry guy, you are right, but back to screw holding. True simple spring clip works ok to retain most screw head shapes.
I use tiny neodymium magnets. They grab stainless well enough to get it where you want. I get mine from hard drives and break them into little pieces and have them pretty much everywhere.
You know that most 1/4 inch drill bit attachments that you can use different bits magnetic or not have a sleeve that slides over the screw to hold it. Crazy.
You mean the sleeve that's designed to keep the screw aligned? The sleeve that obscures the view of the bit head making it impossible to tell how far your sinking the screw head into the material? Hate those
They made a much better option years ago for the stainless problem and it fits in much tighter spaces. Us electricians always called them a holding driver which also comes in Phillips. As for regular drivers and screws any magnet stuff onto the shaft will also hold the screw.
They are complaining it won't hold onto a stainless screw. It says in the name... it's a magnetic bit tip. Why do people expect it to hold onto stainless, a nearly non-magnetic metal except for a specific grade of stainless. Your using the wrong bit for the wrong screw if that's what your expecting. Although a lot of stainless is ever so slightly magnetic it's to the point of nearly not being. If it's not a heavily ferrous metal 'iron based' it won't be attracted to a magnet. Even though stainless has iron it is an alloy that is so heavily mixed with another material that that material generally overrides the iron's magnetic property in it leaving it essentially non-magnetic. This being said there are only two other metals alongside iron that are naturally magnetic, Nickel is one and I believe... Cobalt is the other. I may be wrong on that but I think that's it.
Not all stainless is non-ferromagnetic*. Most stainless steel is made by adding chromium, which does not inhibit the magnetic effects, only when nickel is added. Nickel is added for low temperature strength. Most stainless steel that people encounter daily will be ferromagnetic*
@@levishepard3696 cant answer, the source didnt explain. I'd assume it has to do with the crystal structure made by the alloy. just because the two separate parts are ferromagnetic, doesnt mean the combination will be.
This is the kind of thing that's perfect for 3D printing. I bet there are downloadable files for it already. If not, I'll design them myself, and share them with the world
@@SupremeShucklewent to buy the “special tool” as you wrote but couldn’t find it this isn’t prehistoric times we name items. They used specialized tools to sculpt and paint even a thousand years ago
ATTENTION YOUNG MEN!!: Do not heed this man advice, I tried "just the tip" in high-school, nine months later I was starting my senior year with a bouncing blue eyed baby girl. She I'd great, but it's not advised.
Real stainless steel is a non-ferrous metal. Magnets do not work on stainless steel. If you don't know that you shouldn't be working on people's houses or anything
I have an old school phillips that has a clip boilt in. Only problem is the shank is Aluminum, and it appears as tho someone hammered it into a fastener at some point, deforming the tip. I love that you can buy these for most screwdrivers
Here’s another one, for machine thread screws. Try a tiny dap of some grease or such. I work in water treatment and used to use quite a bit of o-ring lube. That stuff will hold 5/16 x 2 screw on the end of a Phillip’s all day long.
That magnetic bit holder is probably stupidly expensive. the bits themselves that I bought are magnetic. You'll save money if you spend more money the first time.
Stainlees steel, brass, aluminum, lead, zinc, gold, silver are non ferrous metals. It means they do not have any iron in them, and magnets will not work on them. Dispite what some folks may think, copper is slightly ferrous.
Thas a wood screw my guy.. .. not usually in cramped places.. js. For those saying duh.. name one place a Phillips screw is in a cramped place in a car.
I don't know , but were great on the screws for the points & condenser in the distributor on a car . Used them many a time for that alone plus many more places .
looks like something i could model up in blender with wsome cad plugins in a few minutes then print up pretty quickly. I might do that and try some different materials like your standard pla, and my qidi x-plus works great with ABS and i have stainless steel and ruby extruder tips to fire off some carbon fiber filled or glass filled filaments as well...
Yuppers , Craftsman and a few other big brands made them . I bought a full set of these type of screwdrivers way back in the late 1960's and still have a few of them from the set .
So, another option, which I am sure is cheaper, is to go to a hardware store and grab a pack of the really strong magnets that are circular with a small hole in them. Then simply put them on the inside drawer of your tool box and place the tips of your impact driver bits on them. While your at home drinking beer or driving to your jobsite, the bits will become magnetized. When you need them, the tips will be magnetized and hild the screws for you, instead of having to buy that nifty tool that I'm sure is way overpriced, you only had to spend about $4. I've been doing this for years and have the side of my bit drawer plastered with these magnets and they keep my bits in place and magnetize's them at the same time.
I give up . I bought a full set of these screwdrivers way back in the late 1960's and still have a few of them . I just can't get replacement screwdrivers of the same big brand I bought back then , even though they have a lifetime warranty on them . For some reason they discontinued making them just a couple decades ago and that same brand is still around .
Oh man I need these, I do marine electrical so we only use stainless or occasionally brass fasteners. I’ve lost a fair few screws down into the bilges lol
They were on a special screwdriver made by a few big brands . My dad had some and I bought a full set of these screwdrivers way back in the late 1960's . I still have a few of them from the full set I bought .
Absolutely great solution to a problem that should not exist: They should just make magnetic bits, except for stainless screws... then you're screwed without plan B.
Just so you all know, that is the official native pronunciation of the word Milwaukee. I really don't know if it is, but that's wtf it sounded like to me.
I bought a full set of this type of screwdrivers way back in the late 1960's and still have a few screwdrivers from the full set . Just can't find them anymore as replacements . They discontinued making them .
"Mil, walka, I-A"😂😂
Did he AI Gen his own voice instead of making a voice over?
I was searching for SOMEBODY who also heard that.
"Actually, it's pronounced "mill-e-wah-que" which is Algonquin for "the good land." -Alice Cooper
@@spencerleeb party on Wayne!
Came from tiktok, dumb as a thousand russians
Mill walk I A! 😂
Sad nobody understood stainless is not magnetic.
Not sure how this gadget will work though
It’s a sad world then people using tools don’t understand metals
You hear about this new fangled, "Aerospace" Aluminum lol.
That's not necessarily true. Only some stainless isn't magnetic.
@@steelbluesleepR Sadly will rust faster though. 409 and 430 will not really resist corrosion.
Though I get your point.
that was my thought, anybody buying a magnetic screw holder expecting it to work on stainless steel probably has no clue what they’re doing😂
They used to put these on all screwdrivers many years ago. They had a pair of spring steel tabs that pulled forward over the end and held the screw head just like these do.
Hah!
I always wandered what those were for!! Ty
Stanley use to include metal clips to hold screws on their screwdriver kits years ago.
There were other high quality screwdrivers that had metal clips on the screwdrivers decades ago . I still have a few . One was used for the screws on the points & condenser inside the distributor on a vehicle . 😁
I do need to put a lot of drywall screws under my car... haha those are dope
why on earth would drywall screws go under your car
@@gio7861How else would you hold the drywall on 😂
@@gio7861 Why would you NOT use drywall screws under your car?! 😉
@@gio7861your undercarriage interstate drug trafficking mess of woodwork.
Hi there fellow upstate New Yorker
"Remember, just the tip!"😂
And you have to pull out before you finish
I just pictured Steve Carrell biting his tongue and then blurting out “That’s what she said!”
As soon as he said that I came straight to the comments lol
😂 y'all are too much 😭
That’s what she said 😂😂😂
This is why Robertson was the better screw!
Robertson is so superior it hurts. Have a job assembling furniture once, notice that most of the Phillips screws are designed to also accept a Robertson bit-and that work moves three times as fast if you toss the Phillips bit in the trash where it belongs. Dang Henry Ford wanted exclusive rights and Robertson wouldn't give it to him, so that's why the US is cursed with the worst possible screw head pattern
Torx ain't bad either
Robertson system has a certain amount of trouble with the square end breaking off due to stress concentration. Torx and Allen have mainly eliminated this.
@@joelee2371 Allen screws strip for me constantly. That's just anecdotal, but torx is infinitely more reliable for me. Robertson seems good, but I haven't ever had to reuse those screws, so I'm not sure how they hold up on repeated use
God, I hate the US. Get me the fuck outta here.
Imagine calling out a magnetic tip for not holding a stainless steel screw. Mike Rowe is crying right now.
You may want to read through the comment section 🙄
Damn that's Funny~!!!!!! Poor Mike.
No, Mike Rowe slapped yo mama!
I was about to say the same shit 😅
Imagine me on my first day as a fitter helper watching my brand new sexy billet empire level fall to the ground, slipped right off the stainless pipe I so confidently left it resting on. I learned a valuable lesson about metallurgy that day.
My dad used screw holding screwdrivers back in 1955
Wait you mean they had magnets and springs in the ancient 1950s?! But yeah it's pretty amazing how commonplace a ton of useful designs were, yet they get forgotten and re-discovered every few decades anyway.
@@qoph1988 No, many patents just fall off the expiration date and others just adopt them. China does that ALL THE TIME, sadly.
Yup, i have used them, great on non-magnetic screws. Made made by Vanco and Xcelite, and still available. Look under "quick-wedge" they even make them for Phillips screws.
We had stainless steel ones of those thing at the end in Australia 15 YEARS AGO
The robertson screw solved this without any extra tools. Instead of admitting defeat, the phillips screw gang needs these goofy attachments.
likely mostly americans. I saw a thing on this and the superior robertson was about to take over but something about the war starting pushed it back, everything went phillips in the war machines...and the rest is history. Over the years, I've gone through 2 friend's (long time US residents and households), and it wasn't until just a few years ago that i realized none of their multibit hollow-handle style screwdrivers had robertson bits.
@littlegoobie I believe ot had something to do with Ford. There was some falling out and he booted them out of the factory. Phillips was brought it to replace them. I remember doing some research on this a while ago, but can't remember the exact details
Wasn't the Phillips head developed to prevent workers from over tightening and stripping screws? I read that long ago and though how dumb now instead you get stripped bits and stripped screw heads. I'm not even familiar with the Robinson though. Glad you brought it up so I can now go research it. Currently I use torx as my screw head of choice
Man, go torx I’ve used Robertsons but man the torx even for wood screws damn they help.
Torx are the current answer to this problem, and they aren't tapered so they don't strip easily. Not sure if Robertson can withstand more torque or not, but I've never had a problem with Torx
I like the DeWalt version of that magnet bit more. I have both and used them frequently. The DeWalt Phillips bit has a detent at the front, making the magnet choose one of two positions. The "forward position" makes it butt up against the back of a screw, maintaining perfect alignment every time.
Deh-wah-uh alt*
My dad was an electronics tech when i was young , in the 60, and had a standard screwdriver with that spring loaded attachment in steel already on it , it is nice to see that you don’t have to buy the specialized screwdriver to have that added option.
My dad had the same screwdriver with the spring loaded attachment. And I have it now.👍😃
I have several of those. Mostly in straight edge. I also have these skinny twist things that moves a little bar at the tip that work pretty well. Again only in straight edge. And who uses slotted screws if they dont have to? Except my dad. He hated Phillips heads because they strip out easily.
One of the primary reasons I've switched to Torx head screws for nearly everything I do.
Aside from being far more strip resistant, they also tend to stay locked onto the bit well enough by themselves, as long as you aren't slinging your drill around.
They do cost a fair bit more, but are genuinely worth it in most cases.
Agree
Exactly
Stainless steel is slightly magnetic but not too much, depending on the grade. Some stainless isnt magnetic at all.
It usually depends on the alloying elements (percentage of Chromium). Austenitic stainless is not ferromagnetic at all such as your 300 series stainless steel. Martensitic and ferritic steel is either fully or slightly magnetic (paramagnetic). 400 series stainless steel is slightly magnetic. Interestingly, you can reintroduce martensite to an austenitic steel through cold working.
@@jaygraham5407the "quality" has nothing to do with it; it's about the alloy mix and the processing/manufacturing methods. There are many stainless alloys, for many different purposes, some more or less magnetic than others. Source: Wikipedia and manufacturers' web sites.
And some is fully magnetic
@@ericpalmer2831 Well explained. As a Chemistry guy, you are right, but back to screw holding. True simple spring clip works ok to retain most screw head shapes.
@@joelee2371but he didn't say quality. He said GRADE. Grade and quality are not the same thing
Some screwdrivers have little metal wings that can slide up and hold a screw or bolt!
"Just the tip" is a "Universal strategy..." for teenage boys worldwide 😂.
and "need a longer bit...one thicker than the other..."
I came to say EXACTLY that!
Shit ...I still use it on my wife to this day and we been together 10 years.....
That'll learn her 😂 @@johngatsby1473
Works every time….
I had a screwdriver 50 years ago with a slide down holder.
I use them at work all the time.
And it still works 50 years later!.
@@clintl4797
Still have it.
Yuppers , I bought a set of those screwdrivers back in the late 1960's and still have some of them .
@@zakman9244
Yellow handle with green inserts?
Oh how I used to love playing “just the tip”!!!
Archer
Robertson screws do this without any little fiddly plastic bits.
Have these in my bag. Dont use them a lot, but when you need them, they are gold.
I'm flabbergasted, Three in one day you are a SUPERHERO!! LOL!!!!!!!
I think this one was yesterday 🤣🤣🤣🤣
You mean I don’t have to hold the screw now! What an earth shattering invention 😅
Dewalt makes a really good one. Locks in
Just the tip 😂 follow up with slide in ur screw 🎉
😎
My mind went thete too!
Cool Deal Brother. I see a lot of Stainless steel fasteners of various designs, sizes, shapes..
Yeah of course!! I've used the"Just the tip" bit before.... Lol😂
I use tiny neodymium magnets. They grab stainless well enough to get it where you want.
I get mine from hard drives and break them into little pieces and have them pretty much everywhere.
After I saw your video on this I went out and bought it. Was installing door hardware and was pretty handy
Awesomeness 👊👊👊
You know that most 1/4 inch drill bit attachments that you can use different bits magnetic or not have a sleeve that slides over the screw to hold it. Crazy.
You mean the sleeve that's designed to keep the screw aligned? The sleeve that obscures the view of the bit head making it impossible to tell how far your sinking the screw head into the material? Hate those
@@Dunriteproducts
Takes practice to develop a skill.
@@Longwoodfu or just use a better designed tool and not waste time developing a "skill" that could otherwise be spend learning something more valuable
They made a much better option years ago for the stainless problem and it fits in much tighter spaces. Us electricians always called them a holding driver which also comes in Phillips.
As for regular drivers and screws any magnet stuff onto the shaft will also hold the screw.
Wera is my favorite tool brand, their Allen key sets and safe torque wrench is amazing
They are complaining it won't hold onto a stainless screw. It says in the name... it's a magnetic bit tip. Why do people expect it to hold onto stainless, a nearly non-magnetic metal except for a specific grade of stainless. Your using the wrong bit for the wrong screw if that's what your expecting.
Although a lot of stainless is ever so slightly magnetic it's to the point of nearly not being. If it's not a heavily ferrous metal 'iron based' it won't be attracted to a magnet. Even though stainless has iron it is an alloy that is so heavily mixed with another material that that material generally overrides the iron's magnetic property in it leaving it essentially non-magnetic. This being said there are only two other metals alongside iron that are naturally magnetic, Nickel is one and I believe... Cobalt is the other. I may be wrong on that but I think that's it.
Not all stainless is non-ferromagnetic*. Most stainless steel is made by adding chromium, which does not inhibit the magnetic effects, only when nickel is added. Nickel is added for low temperature strength.
Most stainless steel that people encounter daily will be ferromagnetic*
In the knife world most stainless steel are magnetic, yet many people think they're not.
Most commercial kitchen stainless is magnetic too.
@@wrefkIf nickel is magnetic why does it inhibit the magnetic effect of stainless? Just asking
@@levishepard3696 cant answer, the source didnt explain. I'd assume it has to do with the crystal structure made by the alloy. just because the two separate parts are ferromagnetic, doesnt mean the combination will be.
Just use Robertson screws and bits and you don't need any of these
Tiny bit of Blu-Tak works for me.
These. Were available in the 70’s. It was a spring steel clip that fit on the flat blade screwdriver.
This is the kind of thing that's perfect for 3D printing. I bet there are downloadable files for it already. If not, I'll design them myself, and share them with the world
back in the day chewing gum did the trick.
Well this isn’t the 60’s. This is the future, where we have this great invention called “the special tool”
@@SupremeShucklewent to buy the “special tool” as you wrote but couldn’t find it this isn’t prehistoric times we name items. They used specialized tools to sculpt and paint even a thousand years ago
@@SupremeShuckle
Showed your sister my special tool. She said she has been using and cleaning one like mine for years. 😅😅
I enjoy that nut wax stuff but I’ll have to give this a try I just avoid Phillips like the plague square drive or torx
I tried to use that whole "just the tip" defense in court one time... but it didn't work out as planned.
Can't wait for the Paul weller and the jam my uncle introduced me to the jam when I was about 11
Hate to say it being a Milwaukee guy... But the DeWalt version is the best in my opinion
Respect. There’s always a tool that someone else does better than your tool team.
A good phillips bit holds ok but try using robertson head screws (square) they hold great on a good bit
GOOD TO SEE THAT AFTER ALL THESE YEARS, JUST THE TIP STILL GETS YOU IN THE HOLE😂😂😂
Use to use shrink tube on the end of my driver bit, now I upgraded to a piece of silicon tube. Works perfect every time.
Stainless STILL screws??
That's a HECKUVA DILL!
Gotta get one, I use a lot of drywall screws under my car.
Michigan life. 😂
Yeah !! It's great for the drywall oil drip sheet under the car !!! lol
"Mill-e-wah-que," which is Algonquin for "the good land."
Have them already but good find and a nice little tool...
Or use Robertson screws and they will stay on the tool.
ATTENTION YOUNG MEN!!: Do not heed this man advice, I tried "just the tip" in high-school, nine months later I was starting my senior year with a bouncing blue eyed baby girl. She I'd great, but it's not advised.
🤣🤣🤣👊👊
Great! (But what if my boss is the screw)
Everyone else: "DON'T DO IT FOOL!"
I still have my grandpa's Phillips with a spring loaded set of wings. I'm 54 now.
Kids these days ! lol I still have a few of these from the full set I bought way back in the late 1960's .
I bought 4 of these because of your video and the wera ones too! Thank you 💪
People complaining about it not working with stainless are not the brightest bunch huh 😂😂😂😂😂
Agreed 🤣👊
Why do people think stainless steel isn't magnetic??? Do you guys own any knives?
Got about 10 of these for dirt cheap on Amazon. Same thing with an attachment for my drill that allows me to have 4 extra bits at all times.
The sliding sleeve type has never failed me.
Save your money, go to harbor freight, ask them for a METAL drill screw guide and give them $5.
Real stainless steel is a non-ferrous metal. Magnets do not work on stainless steel. If you don't know that you shouldn't be working on people's houses or anything
I bet you are a blast at parties
All the rest of us were thinking it...
And YOU shouldn't be pontificating on subjects about which you know nothing. Look up "magnetic qualities of stainless steel" and read for yourself.
Ferritic stainless shouldnt be called stainless, because it stains.
Wera makes excellent tools. Highly recommend all of their tools (except the Joker wrenches:) )
The Milwaukee catalog has something for any and all applications
I have an old school phillips that has a clip boilt in. Only problem is the shank is Aluminum, and it appears as tho someone hammered it into a fastener at some point, deforming the tip. I love that you can buy these for most screwdrivers
Here’s another one, for machine thread screws. Try a tiny dap of some grease or such. I work in water treatment and used to use quite a bit of o-ring lube. That stuff will hold 5/16 x 2 screw on the end of a Phillip’s all day long.
That magnetic bit holder is probably stupidly expensive. the bits themselves that I bought are magnetic. You'll save money if you spend more money the first time.
Stainlees steel, brass, aluminum, lead, zinc, gold, silver are non ferrous metals. It means they do not have any iron in them, and magnets will not work on them. Dispite what some folks may think, copper is slightly ferrous.
The last time I said, " Just the tip," she slapped me, and I never heard from her again.😂
I always use wood screws under my car. Especially, when I'm drilling into my fuel lines, brake lines, etc.
Thas a wood screw my guy.. .. not usually in cramped places.. js. For those saying duh.. name one place a Phillips screw is in a cramped place in a car.
I don't know , but were great on the screws for the points & condenser in the distributor on a car . Used them many a time for that alone plus many more places .
looks like something i could model up in blender with wsome cad plugins in a few minutes then print up pretty quickly. I might do that and try some different materials like your standard pla, and my qidi x-plus works great with ABS and i have stainless steel and ruby extruder tips to fire off some carbon fiber filled or glass filled filaments as well...
Craftsman had spring steel one's on their hand screwdrivers back in the 70s
Yuppers , Craftsman and a few other big brands made them . I bought a full set of these type of screwdrivers way back in the late 1960's and still have a few of them from the set .
Bro's reinventing the wheel for no reason 😂
So, another option, which I am sure is cheaper, is to go to a hardware store and grab a pack of the really strong magnets that are circular with a small hole in them. Then simply put them on the inside drawer of your tool box and place the tips of your impact driver bits on them. While your at home drinking beer or driving to your jobsite, the bits will become magnetized. When you need them, the tips will be magnetized and hild the screws for you, instead of having to buy that nifty tool that I'm sure is way overpriced, you only had to spend about $4. I've been doing this for years and have the side of my bit drawer plastered with these magnets and they keep my bits in place and magnetize's them at the same time.
Duct tape Works too for screws but stainless isn’t magnetic
Craftsman made the screw tip holder 50 years ago. My father had them.
You do realize the 50s were 70~ years ago, 50 years ago was the 70's i know my granddad had one from the 50s
@@jeffsorrows I'm 70 and I guess they were from the 50's. You ought to see the power tools I have from back then.
I give up . I bought a full set of these screwdrivers way back in the late 1960's and still have a few of them . I just can't get replacement screwdrivers of the same big brand I bought back then , even though they have a lifetime warranty on them . For some reason they discontinued making them just a couple decades ago and that same brand is still around .
Oh man I need these, I do marine electrical so we only use stainless or occasionally brass fasteners. I’ve lost a fair few screws down into the bilges lol
“Just the tip”, at least that’s what I told HER 😂
as a plumber i normal stick the tip in something a bit sticky first.
"Just the tip ...."
😂
Thats what she said!
This guy really talked about wood screws on a vehicle crazy
Bro all these subtle jokes 😂😂😂
1. You can magnetize your drill tips. 2. You can use spit or water for stainless screws. There I just saved everyone 20bucks.
These Screw holding Bits have been around for over a Hundred Years
They were on a special screwdriver made by a few big brands . My dad had some and I bought a full set of these screwdrivers way back in the late 1960's . I still have a few of them from the full set I bought .
That second type has been AROUND FOR 15 YEARS in Australia
Absolutely great solution to a problem that should not exist: They should just make magnetic bits, except for stainless screws... then you're screwed without plan B.
I have one and it's by far the best magnet sleeve out there just for the simple fact it's silicone
Just so you all know, that is the official native pronunciation of the word Milwaukee.
I really don't know if it is, but that's wtf it sounded like to me.
I have the original craftsman ones from the 80s
I bought a full set of this type of screwdrivers way back in the late 1960's and still have a few screwdrivers from the full set . Just can't find them anymore as replacements . They discontinued making them .
God damn. This is rocket science....
Stainless can become slightly magnetic of cold form or cold pressed, but still will fall off a magnetic piece
Wonder what that chinese plastic with the Milwaukee name on it runs. Dewalt has had a metal one with a collar for a while for a few bucks.
They look like something I'd expect to see on a Taofledermaus video.
I remember all the times I've used drywall screws on my car.
They're great for the drywall oil drip sheet on the bottom of an oil dripping car to stop leaving a mess in the driveway !! lol
It’s called tape or sellotape in some places dose a great job holding into screws even when pulling screws through box section
Also... neodymium magnets can actually slightly stick to stainless steel...
The solution for all of this is square-head screw. Amazing
Look at what man has built without those...
Not Really. They found evidence of these during the time of the Great Pyramid construction
Square drive works great, don't even need a magnet!
I mean i use dry wall screws to install my head gaskets and oil pan they work amazing
You can use electrical tape to hold a screw in place. Punch thru the tape and put it on the shaft of the drill driver bit.
“Remember! Just the tip” 😂
Congrats on 1.3M.. that's real nice like.
Pabs 👊👊👊
If you're strong enough, every screw becomes a nail.