🧰Step by Step! How to do Front Brake Disc Conversion on my Mustang
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2024
- 📷 Follow Us On Instagram / dannypazos1
@DannysClassicGarage
⛽Hello Guys!!...we are a little closer to the end today we installed the front disc brakes on the Mustang project 👍...I hope you enjoy the video and don't forget to subscribe
⛽Hey Muchachos, cada vez estamos mas cerca del final, el dia de hoy instalamos los frenos de disco frontales en el proyecto del Mustang 👍.. Espero que disfrutes el video y no olvides subscribirte al canal
Parts Used in this Video / Partes usadas en este video:
1- 🧰Wilwood Classic Series Dynalite Front Brake Kits 140-13476-DR
www.summitracing.com/parts/WI...
____________________________________________________________________________________
Did you you enjoyed? Check this other Videos / Lo disfrutaste?? Aqui tenemos otros videos 👌
1.-Power Steering Installation went Wrong 💥on my 66 Mustang 🐎⛽🚗
• Power Steering Install...
2.-How to install a Trunk Weatherstrip on 66 Mustang!! Step by Step
• How to install a Trunk...
3.-How to install an Aluminum Radiator on my 66 Mustang!! Step By Step
• How to install an Alum...
4.-💥Steering Column Problem Solved on my 66 Mustang🐎
• 💥Steering Column Probl...
5-Step by Step🐎Old Fuel Line Replacement on my 66 Mustang Project
• Step by Step🐎Old Fuel ...
6-⛽️Fuel pump and regulator on my 66 Mustang Project #mustang #ford #automobile #car
• ⛽️Fuel pump and regula...
7-🧰Front Suspension Part 1 66' Mustang project
• 🧰Front Suspension Part...
8-🧰Sway Bar Installation on my 66 Mustang 🐎 #automobile #car #ford #mustang #frontsuspension
9-🧰QA1 Coilovers Installation on My 66 mustang
• 🧰QA1 Coilovers Install...
⛽Thanks for watching my videos, don't forget to like and subscribe to support the channel 👍
-------------------------------------------------------------------------------------------------------------------------------------------------------
#mustang #ford #car #automobile #classiccars #classiccars #frontbrakes #wilwood #discbrake #restomod - ยานยนต์และพาหนะ
Great work! Keep it up!
Thanks 👍🏻 trying my best 👌🏻
No dust plates ? Aren't they offered
This kit was designed without dust plates, so I'm assuming that because the pads are made with low dust compounds
I hope you put enough grease on those bearings. It usually takes a lot of grease. It didn't look Iike they had very much in them.
Thanks for the tip!, yes i did 👍