Thank you for showing us this project, I've been trying to figure out how to make a very small, fuel sipping generator to charge my solar batteries after a week of cloudy weather. I can't seem to find a commercially made one. You can use a 3 phase voltage regulator from any motorcycle for a regulated twelve volts DC. If you remove the clutch, you might be able to have an electric start with a 3 phase motor controller too.
Cheers for this, I have been researching "making an electric generator with magnets" for a while now, and I think this has helped. Have you ever come across - Pansaiah Renowned Preeminence - (search on google ) ? It is a smashing one off product for discovering how to create an efficient homemade generator without the headache. Ive heard some amazing things about it and my m8 got cool success with it.
This was great, been searching for "domestic electricity generation" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a google search ) ? It is an awesome exclusive product for generating your own electricity minus the hard work. Ive heard some amazing things about it and my colleague got great success with it.
Hi. Good job. you can increase the output voltage by substituting the pulleys, the big pulley on the engine shaft and the smaller one on the electric generator.
Fantastic, awesome. Never seen something like that in my life. 250Watt DC, ranging from 30 to 80Volt, no AC. Wow, that is the greatest project on TH-cam. I'm sure my comment will now be #1.
this is pretty damn cool. i got a small harbor frieght predator engine and used an old car alternator which fed a led acid battery bank and a power inverter. was a crude setup but it worked well for keeping some critical appliances running when the power was out. woking on a smaller more refined setup with a better engine+alternator setup and lifepo4 batteries. (for on the go power just get something like the jackery units and have a generator recharge that if you need to)
First of all you should remove the clutch in engine and direct propel the generator and use a governor (speed controller) i.e over loading..it increase speed automatic and stable the power...and fuel efficiency tooo.....
I love that the only spoken words in this video is an ad , no words to explain anything!!! That’s the kind of DIY video you want zero spoken words explaining anything and advertisements! The only words that are on screen that explain anything are , “gas engine”
no supera los 30 volts y por el calibre del bobinado debe tener una corriente no superior a los 5 amperios...mucho gasto de combustible y poca generación de energía eléctrica, es decir, poco eficiente.
This is the best video and I liked it. One request please ,can you make a DIY with a minimum sized petrol engine charging directly a ev battery. And products that you use should be also available to us.
The typical hoverboard uses a battery pack which can deliver 15-20 amps but if you gear it to output about 30 volts at the max power rpm of the motor which might be 7500 to 9000 rpm and then use a buck converter rated for 20a input at 30V and >30a output you should be able to get over 30a output at 14V so you should be OK.
There has been a lot of things in this world I never did understand and electrical and those components is definitely one of them we need people like you in this world bro Keep On Keepin On man always a big UPS👍👍👍👍👊👊
Brilliant ingenuity. Just two issues I see - how to keep the chain lubricated and how to keep the chain tensioned at the top (as it bounces quite a bit). Otherwise ingeneous idea!!
You need a governor to regulate the speed the gas engine because as the load increases he resistance of of the generator makes it harder to turn o the speed of the engine drops so in real generators they use a mechanical governor to increase rpm to compensate for the load
I need to put a 1200 watt 12v car amplifier on my 150cc gy6 moped.... Is this possible with what the stator it currently has? 8pole stator. No headlights being powered, no taillights, brake light etc. Just want to power 2 6x9 200watt speakers, a 1200 watt car Amp and a small car stereo. All 12v. Is this possible without having to do any major modifications?
Nice But 1000 watt engine and 250 watt alternator..? If you want small; a smaller engine, but what? Or a bigger alternator like an E-bike hub motor. Or both Hoverboard motors. How to package that small?
@@casparpaarlberg9560 NOOOOOOO ..but it was awesome of you to note the ONE YEAR Fact of the matter ... the project was attempted ..but COVIDs financial impact on my life has been full and total. Meanwhile ... how is your creation running ? Still works ?
I am using heavy duty, Delco alternators, with custom regulation, using 150 amp modified alternators, the Delco 22si alternators are used in industrial trucks, I have several, and using one on a 6hp engine, it should output atleast 130-150 amps at 28-29.4vdc, I'm also thinking about putting one on my riding lawnmower, so it can be used in emergency to add to the emergency charging capability, using a DC generator to charge, insted of a ac generator can be more efficient, over a HV AC generator, then converted to useable DC voltage , more losses, the alternator can run at any RPM, is another plus, it can be tuned to charge at nearly any RPM. I also have a possible steam engine generator , to be powered by a small boiler on a wood stove, off grid require many means of power generation and storage!
This is by far very simple technical instructions and looks very clean conversion. My only question is why put such a small gear on the Engine output, a bigger Gear would have resulted in much more output from Generator. Secondly I just wanted to know that this small 36cc 4-stroke Engine output power equals to 0.6 or 0.9KW of energy, so if you could have selected and I say IF, like a more bigger Generator with extra coils or Permanent magnets that can produce let’s say more than 1KW or even 2KW of Electric energy, then would you actually get more energy OUT than your actual Input Energy ?? Just my little dum dum question......
He was just playing with the throttle control himself. But I imagine you could create a governor to either maintain engine speed or voltage depending on what you're looking to do.
I wonder if you could run a hub motor electric bike off this, It could sit out over the rear tire on a newspaper carrier and give you the option of highly extended range and battery charging at idle and braking times with the right electronics. Allowing for extended powered rides...
If you had those the torque could come from the electric motor and the ongoing speed could come from the weed eater motor making the most efficient motorized bicycle. Idk if i would use electronics maybe a more mechanical approach first just to get the idea rolling
Have you tried to spin one of the bldc motors, just shorting 2wires, its nearly impossible to spin by hand, short all 3. And it's basically impossible. It would likely not have the power to spin it with such a overdrive , 750 watts is basically 1hp, with losses , it will take 2-3+ hp to spin this at full power!
hai bro please clarify me, the BLDC hub motor will generate DC current only but you are explaining AC current. give a link if you have any video about that.
This is just superb, I been tryin to find out about "how to create your own electricity" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a search on google ) ? It is a great one off guide for generating your own electricity minus the headache. Ive heard some amazing things about it and my work buddy got excellent results with it.
Cool. Oil your taps and drills while using to prolong their life and make your life easier.
Im jealousy so proud of this guy but im not hating because i give 100% props. Im trying to reach his level.
Thank you for showing us this project, I've been trying to figure out how to make a very small, fuel sipping generator to charge my solar batteries after a week of cloudy weather. I can't seem to find a commercially made one.
You can use a 3 phase voltage regulator from any motorcycle for a regulated twelve volts DC.
If you remove the clutch, you might be able to have an electric start with a 3 phase motor controller too.
We’re now at a time when we can say the phrase “old hover board” 🤣
Haha I just realised
Cheers for this, I have been researching "making an electric generator with magnets" for a while now, and I think this has helped. Have you ever come across - Pansaiah Renowned Preeminence - (search on google ) ? It is a smashing one off product for discovering how to create an efficient homemade generator without the headache. Ive heard some amazing things about it and my m8 got cool success with it.
This was great, been searching for "domestic electricity generation" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a google search ) ? It is an awesome exclusive product for generating your own electricity minus the hard work. Ive heard some amazing things about it and my colleague got great success with it.
😂😂
Hi. Good job. you can increase the output voltage by substituting the pulleys, the big pulley on the engine shaft and the smaller one on the electric generator.
Way too much RPM:s for that hub, would not last long.
Ya that's what I was thinking maybe not a straight switch maybe a 2-1 this looks like a 1-16 😂
Fantastic, awesome. Never seen something like that in my life. 250Watt DC, ranging from 30 to 80Volt, no AC. Wow, that is the greatest project on TH-cam.
I'm sure my comment will now be #1.
Excellent. I was considering using a car alternator and replacing the energised coil with a set of magnets from a few hard drives.
what RPM does the hoverboard motor spin at for 250Watts output?
this is pretty damn cool. i got a small harbor frieght predator engine and used an old car alternator which fed a led acid battery bank and a power inverter. was a crude setup but it worked well for keeping some critical appliances running when the power was out. woking on a smaller more refined setup with a better engine+alternator setup and lifepo4 batteries. (for on the go power just get something like the jackery units and have a generator recharge that if you need to)
This clip is of the type "how to make a match out of a log."
Exactly
First of all you should remove the clutch in engine and direct propel the generator and use a governor (speed controller) i.e over loading..it increase speed automatic and stable the power...and fuel efficiency tooo.....
Excellent project 👍 very good
What if you use the small sprocket on the generator and the large sprocket on the engine and leave the motor in idle?
DC VOLTAGE OUTPUT?
Would this engine be strong enough to power 2 hubs?
Yes it can but we need to double the gear ratios and make it run at full throttle.
That will definitely make it heat up alot faster.
I love that the only spoken words in this video is an ad , no words to explain anything!!! That’s the kind of DIY video you want zero spoken words explaining anything and advertisements!
The only words that are on screen that explain anything are , “gas engine”
what is output volts after that motor
no supera los 30 volts y por el calibre del bobinado debe tener una corriente no superior a los 5 amperios...mucho gasto de combustible y poca generación de energía eléctrica, es decir, poco eficiente.
Nice build! Clean craftsmanship.
How many amps does it produce?
He gives the watts and voltage. You can figure it out
Como el calibre de las bobinas es muy delgado no da muchos amperios
This is the best video and I liked it. One request please ,can you make a DIY with a minimum sized petrol engine charging directly a ev battery. And products that you use should be also available to us.
Which soldering iron is best portable
Can we run car compressor with this engine
Nice build
What is the max AMP can be drown from the Hoverboard? at least 30Amp?
The typical hoverboard uses a battery pack which can deliver 15-20 amps but if you gear it to output about 30 volts at the max power rpm of the motor which might be 7500 to 9000 rpm and then use a buck converter rated for 20a input at 30V and >30a output you should be able to get over 30a output at 14V so you should be OK.
hello sir you have a study for a generator with smart drive motor for coupled with a hybrid inverter
Nice Project, I love these hoverboard conversions!
This guy sure payed attention in school.
Nice video btw
There has been a lot of things in this world I never did understand and electrical and those components is definitely one of them we need people like you in this world bro Keep On Keepin On man always a big UPS👍👍👍👍👊👊
Brilliant ingenuity. Just two issues I see - how to keep the chain lubricated and how to keep the chain tensioned at the top (as it bounces quite a bit). Otherwise ingeneous idea!!
You need a governor to regulate the speed the gas engine because as the load increases he resistance of of the generator makes it harder to turn o the speed of the engine drops so in real generators they use a mechanical governor to increase rpm to compensate for the load
Amazing! Surprisingly a motor from hoverboard could be a generator. I just wonder how efficient it is.
Every motor can be a generator .
What is Out put voltage and amps
Those are mosfet..??
I missed your video to search curious to make but I am government school students so I don't have much money.
In future i made ❤
I need to put a 1200 watt 12v car amplifier on my 150cc gy6 moped.... Is this possible with what the stator it currently has? 8pole stator. No headlights being powered, no taillights, brake light etc. Just want to power 2 6x9 200watt speakers, a 1200 watt car Amp and a small car stereo. All 12v. Is this possible without having to do any major modifications?
Sir you didn't show to us how you modified the wire connection inside the hover board when you take out the electronic circuit inside the hover board.
The link for the engine isn’t working.
How much gasoline is consumed for 1 day?
Nice
But 1000 watt engine and 250 watt alternator..?
If you want small; a smaller engine, but what?
Or a bigger alternator like an E-bike hub motor.
Or both Hoverboard motors. How to package that small?
What wattage are you getting?
If you ask me you have your sprockets backwards.
Large should be on the motor and small on the hub.
How much power does it generate?
excellent
How many amps max ?
Good work 👍👍
Salam
Where to buy cheep useable hover board for projects
Awesom work ..
Brother please make a home made wind turbine project video...
This is pretty cool. Was hoping you were going to charge the hoverboard batteries with it though.
There is no link of engine in description
It looks like the type of engine that is used on weed whackers..
Very impressive you are talented. A quicker and easier way to get a generator is to go buy one at Harbor Freight for $89
What about the wattage?
How do you know how to match the engine power and the generator capacity to make something useful? Some hints?
Good project...dont leave gasoline too long in a clear plastic bottle..it will dissolve it and put clear round spherical plastic parts in your carb.
Are you using gas?
Hi, The smaller gear should be on the electric motor and the bigger gear on the gas engine. To get higher speed
How much volt out dc
Excellent project ...very useful for my project ... After my project is done I will be giving you credit (will take about a year ...but still!!)
Finished now?
@@casparpaarlberg9560 NOOOOOOO ..but it was awesome of you to note the ONE YEAR
Fact of the matter ... the project was attempted ..but COVIDs financial impact on my life has been full and total.
Meanwhile ... how is your creation running ? Still works ?
@@casparpaarlberg9560hello, fellow caspar
Can we use fan
Why did you reduce the generator speed?
We need to increase the torque produced by the engine to drive the motor
@@DIYKingSaM you reduced it on the generator!
@@PMF3d Same principle as a bicycle, to have more power to the rear wheel you reduce the front gear and increases rear wheel's gear.
@@f4tboy99 the motor is on the bearings, it easily rotates, why increase thrust?
I'm building something similar, but larger, and about 150 amps at 30vdc to charge batteries in my off grid home!
have you done ??
I am using heavy duty, Delco alternators, with custom regulation, using 150 amp modified alternators, the Delco 22si alternators are used in industrial trucks, I have several, and using one on a 6hp engine, it should output atleast 130-150 amps at 28-29.4vdc, I'm also thinking about putting one on my riding lawnmower, so it can be used in emergency to add to the emergency charging capability, using a DC generator to charge, insted of a ac generator can be more efficient, over a HV AC generator, then converted to useable DC voltage , more losses, the alternator can run at any RPM, is another plus, it can be tuned to charge at nearly any RPM. I also have a possible steam engine generator , to be powered by a small boiler on a wood stove, off grid require many means of power generation and storage!
@@jamest.5001 :)) Great Job 👍
This is by far very simple technical instructions and looks very clean conversion. My only question is why put such a small gear on the Engine output, a bigger Gear would have resulted in much more output from Generator. Secondly I just wanted to know that this small 36cc 4-stroke Engine output power equals to 0.6 or 0.9KW of energy, so if you could have selected and I say IF, like a more bigger Generator with extra coils or Permanent magnets that can produce let’s say more than 1KW or even 2KW of Electric energy, then would you actually get more energy OUT than your actual Input Energy ?? Just my little dum dum question......
No the engine would stall
WHAT CURRENT?
Can we using car alternator?
Excellent bro👍👍
I like your creative idea 👍🏻👌🏽
Are Hoverboards old now
Incredible work👍
Great project. What is happen with rotation speed when electric energy consumption is changing, do you have a loop back control ?
He was just playing with the throttle control himself. But I imagine you could create a governor to either maintain engine speed or voltage depending on what you're looking to do.
Which motor is best 775 or 895
775
I wonder if you could run a hub motor electric bike off this, It could sit out over the rear tire on a newspaper carrier and give you the option of highly extended range and battery charging at idle and braking times with the right electronics. Allowing for extended powered rides...
Prolific Invention brilliant idea!
If you had those the torque could come from the electric motor and the ongoing speed could come from the weed eater motor making the most efficient motorized bicycle. Idk if i would use electronics maybe a more mechanical approach first just to get the idea rolling
@jujitsuman68 link to a video?
this has already been invented. it's called a motorbike
WHAT HAPPENED TO THAT HOVERBOARD
Why not to use cheap used car alternator?
Good job sir
nice idea brother
Why not the spocket@gear use big on engine and small on coil, and disable clutch on engine. Slow rev high spin on coil. Save fuel. Just a suggestion.
Have you tried to spin one of the bldc motors, just shorting 2wires, its nearly impossible to spin by hand, short all 3. And it's basically impossible. It would likely not have the power to spin it with such a overdrive , 750 watts is basically 1hp, with losses , it will take 2-3+ hp to spin this at full power!
I like the video a lot I just think the music is kinda annoying. Awesome stuff you have some skill lol
hai bro please clarify me, the BLDC hub motor will generate DC current only but you are explaining AC current. give a link if you have any video about that.
Great video
Keep up the good work
This guy is about to build an autobot from old hoverboard parts
I'm finally prepared for when I get sent to the past
Again I wish I had electronic skills mechanically I'm inclined for sure thanks great video
thanks bro 👍👍👍👍
Peut on acheter ce générateur ?
Parabéns amigo bom trabalho 👍👏
कोई भी चीज़ के बारे मे प्रैक्टिल से बताते है ,तो जोरसे संगीत बजाना हि जरुरी है क्या?
can you produce consistent 14 VDC and over 30 AMP ?
Delete the clutch direct drive the chain so the engine can basically idle and make the same amount of power
how come you didnt make a full-wave rectifier (AC output)? very good craftsmanship though
Great build thanks for sharing very clean!!
Can I use bridge rectifier from aliexpress. Then how many ampere and volt need to used
Great video but I recommend to use a direct drive instead of clutch
That was awesome bro. I'm looking forward to watch more
Pretty fantastic work, dude!!!! 😃
This is just superb, I been tryin to find out about "how to create your own electricity" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a search on google ) ? It is a great one off guide for generating your own electricity minus the headache. Ive heard some amazing things about it and my work buddy got excellent results with it.
Very nice work. Super 👍👌
Yes, sure it can generate the voltage, but you didn't show us the max current .
Woow .Awesome working my friend
Good job.
Ah yes. We all have a spare hover board lying around. (Cool vid tho)
Real DIY KING
Genius I love it. Can it power LED maybe low voltage POE lighting?
It'll blow out of Bank of LEDs
Up to 50w
Thank you
This is why I'm in favor of immigration. We need more smart people in the US.
99% of Americans are pro immigration, as long as they do it legally!!