Great video!! Yesterday I was standing in my garage trying to figure out a way I could mount my mosko moto bags to my crash bars. Was looking at mounting a molle style plate to the bars but this would be way easier. Thanks for sharing.
Ladies and gentlemen, welcome to the "McGuyver" Mason Motorcycle Show, brought to you by Mosko Moto! Nicely done, especially using existing pieces! Thanks Brother.
I copied your idea but am using TUSK fender bags. Not as big as your moose bags but do the same thing. Can hold two tubes in one, an air compressor, all tools, super glue, loctite, JB weld etc. in the other. Lots of room and fairly inexpensive. Have held up well this year so far. You have to do the same as the moose bags and cut the metal fender clips off. The Tusk bags have velcro shut pockets for two tire irons per side and are included with the bags.
I copied your idea with the Moose bags on a 2007 KLR650 crash bars, and it’s been working great for two years up on the mud up here in AK! They’ve even stood up to a few dirt naps with no problems. Thanks Mason!
I just received two of the newer graphic Moose bags but had to get them off eBay from England. Other than the graphics, they look the same as the older ones you have. I was able to get my tools in one bag and the portable pump and flat repair kit, plus tire tools, in the other. I have heavy duty tubes which are too big to fit in the bags so I will need to find another way to carry those. I have Tusk hard bags but don't normally need them. It will be nice to have needed supplies on the bike and only add the bags when needed.
Mine are Givi roll-top waterproof 5ltr bags on sw-mototech crashbars. They are doing well, despite all the brush bashing they get. But I'm a V-Strom 1000.
Got some bags with the heed bars when l orderd crashbars from them... Fits right on for once,about same size as this ones. Great extra luggage for small things on the bike.
Thanks for the update, I recently bought the. Moose bags similar to yours. I believe the only difference might be the colours they offer now. I did cut off the tail of the webbing and hope that wasn’t a mistake after I’ve seen the keepers your using. Thanks for all the great advice.
Thanks for the video!!!! love the Moose Racing bags and was sad to see there no longer available...... just picked up a KLR and wanted some bags for the crash bars. Now if Mosko would just get some items in stock........
@@masonsadv I did end up with some Mosko 4L bags but they were to nice to use....... I did find these from Moose Racing PUL-3510-0107 they work great and are just black now....... metal clips were cheesy and a set of dikes cut right through to get them off the straps........ I like the fact that they have all the straps to hold tools rather than finding something to put tools into to get them in the 4L bags.
Great idea! I ended up getting 2 Moose tube bags, they tuck in between the SW Motech bars nicely. I also removed the fender clips, and criss-crossed the straps. One side holds a spare tube and spoons, and the other side all my tools.
No I haven't but after 5 years I can say it works well! Nice having some of the items that I take everywhere low and forward and not having to move anything when I change my setup. Cheers Robert.
I'm currently running the Giant Loop Possibles Pouch which are 3.5 liters and roll top which can be a little tight.This may be jut the reason I need to justify the Mosko order. I've had the Nomad tank bag in the cart for some time now, so I add a couple small pouches and present it to the budget committee and see what she says.
Clever. Could also cut strips of the double sided velcro to keep loose staps tidy. Ive started using molle pouches instead of bike brands...which are getting over priced. And Malice clips are the best secure way to attach molle stuff.
*** ALTERNATIVE option *** IF you have the SW Motech crashbars, the Giant Loop Possibles bags work awesome! They're a drybag and all straps/clips are included. About $50 (USD).
I don't actually know. it's an old beater Old Mason had kicking around but I have a link to one similar in the Amazon store here CA www.amazon.ca/shop/masonsadv US www.amazon.com/shop/masonsadv
Great video!! Yesterday I was standing in my garage trying to figure out a way I could mount my mosko moto bags to my crash bars. Was looking at mounting a molle style plate to the bars but this would be way easier. Thanks for sharing.
Ladies and gentlemen, welcome to the "McGuyver" Mason Motorcycle Show, brought to you by Mosko Moto! Nicely done, especially using existing pieces! Thanks Brother.
Much appreciated! Cheers Patrick :)
I copied your idea but am using TUSK fender bags. Not as big as your moose bags but do the same thing. Can hold two tubes in one, an air compressor, all tools, super glue, loctite, JB weld etc. in the other. Lots of room and fairly inexpensive. Have held up well this year so far. You have to do the same as the moose bags and cut the metal fender clips off. The Tusk bags have velcro shut pockets for two tire irons per side and are included with the bags.
Awesome, another option! Cheers Ryan.
I copied your idea with the Moose bags on a 2007 KLR650 crash bars, and it’s been working great for two years up on the mud up here in AK! They’ve even stood up to a few dirt naps with no problems. Thanks Mason!
I have been known to drag the KLR around on them too 😄 Really have held up well. Cheers!
Thank you for your videos! They're very helpful.
I just received two of the newer graphic Moose bags but had to get them off eBay from England. Other than the graphics, they look the same as the older ones you have. I was able to get my tools in one bag and the portable pump and flat repair kit, plus tire tools, in the other. I have heavy duty tubes which are too big to fit in the bags so I will need to find another way to carry those. I have Tusk hard bags but don't normally need them. It will be nice to have needed supplies on the bike and only add the bags when needed.
Mine are Givi roll-top waterproof 5ltr bags on sw-mototech crashbars. They are doing well, despite all the brush bashing they get. But I'm a V-Strom 1000.
Good to know! Cheers Dex :)
Hay I took my22 klr from Elizabeth nj to Athens ga and made it down and back with no problem
Lawn stripes are looking good!
I think so too! First year I've had the ambition to go after a proper lawn 😄
Great idea as I have the same crash bars will do this for sure.👍🏻nice to keep the tool roll and tubes on bike all the time. Thanks Mason.
Nice, Cheers Scott!
I was able to get the new style Moose bags to mount and function just fine. Thanks for the tip,
Great to hear! Lots of options ;)
Got some bags with the heed bars when l orderd crashbars from them... Fits right on for once,about same size as this ones. Great extra luggage for small things on the bike.
It's so nice getting some of the weight forward and low! Cheers Toby!
I have the newer versions (I think) unless they changed again. Mine are black and orange. They work great as well. I have the Tusk crash bars.
Yes I think so. Glad to hear they work. I was getting comments that they didn't but I haven't seen the black and orange ones up close. Thanks Sean!
Good to know! I have the tusk crash bars too!
Awesome idea with the molle!
Thank you! Cheers!
Thanks for the update, I recently bought the. Moose bags similar to yours. I believe the only difference might be the colours they offer now. I did cut off the tail of the webbing and hope that wasn’t a mistake after I’ve seen the keepers your using. Thanks for all the great advice.
I thought so too but I haven't had the chance to try the new Moose bags. Thanks for the info Mike. Cheers!
That is great Mason, was wondering what I could make work, thanks 👍🏻👍🏻
Happy to help Ian. Good luck with your build!
Thanks for the video!!!! love the Moose Racing bags and was sad to see there no longer available...... just picked up a KLR and wanted some bags for the crash bars. Now if Mosko would just get some items in stock........
Keep an eye, their inventory comes and goes ;)
@@masonsadv I did end up with some Mosko 4L bags but they were to nice to use....... I did find these from Moose Racing PUL-3510-0107
they work great and are just black now....... metal clips were cheesy and a set of dikes cut right through to get them off the straps........ I like the fact that they have all the straps to hold tools rather than finding something to put tools into to get them in the 4L bags.
Good info. I run bags on my crash bars as well and struggled to fit them securely. I need to check out this Moscow moto bags.
They certainly have held up well on my setup. Cheers C Fish!
Nicely done
Thank you! Cheers Jim :)
Wolfman Rolie Bag would work as well.
I'm sure it would! Cheers.
Great idea! I ended up getting 2 Moose tube bags, they tuck in between the SW Motech bars nicely. I also removed the fender clips, and criss-crossed the straps. One side holds a spare tube and spoons, and the other side all my tools.
Very cool!
Have you ever tossed you ideas to the manufacturers? I have always liked the way you had them mounted.
No I haven't but after 5 years I can say it works well! Nice having some of the items that I take everywhere low and forward and not having to move anything when I change my setup. Cheers Robert.
Good shit buddy Ron from the land down under
Cheers Ron!
Great idea
Thank you! Cheers!
I'm currently running the Giant Loop Possibles Pouch which are 3.5 liters and roll top which can be a little tight.This may be jut the reason I need to justify the Mosko order. I've had the Nomad tank bag in the cart for some time now, so I add a couple small pouches and present it to the budget committee and see what she says.
Ahh yes, the budget committee Good luck ;)
Clever. Could also cut strips of the double sided velcro to keep loose staps tidy. Ive started using molle pouches instead of bike brands...which are getting over priced. And Malice clips are the best secure way to attach molle stuff.
For sure! Lots of options out there and good idea on the velcro 👍
Molle and straps! There is always a way!
Always! Cheers Ron ;)
Great ideas, thanks
Thanks for watching!
👍🏼 good info and being prepared 💪🏼
Cheers FC! The items in those bags I won't leave home without ;)
First tip. Install the SW Motech bars. 🤣
Haha, that would help! Cheers Pinkie!!
*** ALTERNATIVE option *** IF you have the SW Motech crashbars, the Giant Loop Possibles bags work awesome! They're a drybag and all straps/clips are included. About $50 (USD).
Thanks for the info! Quite a few options out there :) Cheers.
What is that stand?
I don't actually know. it's an old beater Old Mason had kicking around but I have a link to one similar in the Amazon store here CA www.amazon.ca/shop/masonsadv US www.amazon.com/shop/masonsadv
Perfect place to carry tools , keeps the weight down low
It does and these are the items I don't leave home without ;)
👍🙏✝️😀
Cheers Woodrow!