Installing a 240v Hook up kit into your van/campervan.
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- @Turningspanners
Here we have a step by step guide for installing a 240v hook up to either your van or camper, I hope you find this useful. Please feel free to comment and thank you for watching.
I find it interesting that you used a level when you could've just easily measured up from the other socket. Van could've been sat on a slope, more weight usually on one side of them builds as well. Unless of course you checked the level on the worktop/socket before 😂
Thanks for the comment, I used a combination of the two and ended up using the worktop as a datum as the socket below was not level 🤦♂
@@TurningSpannerz 😂
Did you remove the exhaust heat shield to fit this?
Hi Mark,
No I did not need to remove the exhaust heatshield to install this kit. Hope this helps
Sorry must have missed it BUT what does the 1.5mm flex go to/from?
Hi Rob.
1.5mm flex goes from the fuse board up to the sockets.
2.5mm goes from the hook up plug to the fuse board
Hi Rob.
1.5mm flex goes from the fuse board up to the sockets.
2.5mm goes from the hook up plug to the fuse board
Hi Rob.
1.5mm flex goes from the fuse board up to the sockets.
2.5mm goes from the hook up plug to the fuse board
Hi Rob.
1.5mm flex goes from the fuse board up to the sockets.
2.5mm goes from the hook up plug to the fuse board
@@TurningSpannerz Cheers mate - just buying the gear from Amazon this evening to copy the exact same on your video. Is there any concern with running something like an air fryer off a socket with 1,5mm flex possibly?