Hi, there. Thanks for your question! The answer is yes it should be primed. Pine is a soft wood and soaks up paint, so you use more of the finish paint. Priming seals the wood for protection and also minimizes the amount of finish paint you use. Hope this helped!
What do you call that little wood spacer you use? What size is that? Is that a standard size ? I'm a newbie here and learning how to follow and do wall paneling.
That's all it is, a spacer, and depending on what size space, you desire between the panels and rails, that is the size you cut it. Then all your gaps will be equal. It's just a piece of scrap wood. Most popular size tends to be 100mm ( 4" ) but as i said, it's what size suits you best.
Amazing video, covering all the basis one more thing. I know you don’t want to promote the products shown in the video. However can u share what all products and its link in b&q for quick purchase. I mean pine wood is fine but what are the dimensions of upper border and then of panels
Hi there, you will find this information in the video at 3:03. You would find the angle and half it, the same as you would for the dado rail. If you are doing it the same as the video the angles would be 65 and 25 degrees. I hope this helps 😊
I am screaming at the video, I'm sure it is easy, but I just can not grasp the angles going up the stairs. I understand the first part where you measure the angle at the top that hives you 65 degrees, but after that, im lost.where is the 25-degree going? The piece of wood is laying flat.? And where did you get 25 degrees
Excellent video. Keep it up. Grate job
Thank you very much! 😊
Do you need to use primer on pine beading? Or can you just paint straight over with emulsion?
Hi, there. Thanks for your question! The answer is yes it should be primed. Pine is a soft wood and soaks up paint, so you use more of the finish paint. Priming seals the wood for protection and also minimizes the amount of finish paint you use. Hope this helped!
This is the best video i saw quick and simple
We're glad you found our video helpful 😊
What do you call that little wood spacer you use? What size is that? Is that a standard size ? I'm a newbie here and learning how to follow and do wall paneling.
That's all it is, a spacer, and depending on what size space, you desire between the panels and rails, that is the size you cut it. Then all your gaps will be equal. It's just a piece of scrap wood. Most popular size tends to be 100mm ( 4" ) but as i said, it's what size suits you best.
Hi, the spacer is just an offcut of wood. The size would be down to your preference and design 😊
Where can i get one if i do not have scrap wood? I’m a newbie too 😅
What nail gun did you use? Would it work on a concrete wall
Hello! We used the nail gun linked below. The one we used isn't designed to work on concrete. Hope this helps. 😊
bit.ly/4aFsd6A
I see some people oeople attach a sheet of Mdf forst before attaching all the mouldings, is that a more 'belt and braces approach' ?
Hi there, you could secure sheets of MDF if the wall is uneven or you can secure it with a staple gun as shown. Hope this helps! 😊
Amazing video, covering all the basis one more thing. I know you don’t want to promote the products shown in the video.
However can u share what all products and its link in b&q for quick purchase. I mean pine wood is fine but what are the dimensions of upper border and then of panels
Hi, there! If you click the "i" icon in the top right corner it will show you all the products we used in this video! Hope this helps 😊
I don't see an i anywhere? @b&q
Did you use the same wall paint for the dado etc?
Hi! These can be painted with the same paint.
when the dado rail is 70 degrees. What angle is the other mitre that comes down the stairs?
Hi there, you will find this information in the video at 3:03. You would find the angle and half it, the same as you would for the dado rail. If you are doing it the same as the video the angles would be 65 and 25 degrees. I hope this helps 😊
I am screaming at the video, I'm sure it is easy, but I just can not grasp the angles going up the stairs. I understand the first part where you measure the angle at the top that hives you 65 degrees, but after that, im lost.where is the 25-degree going? The piece of wood is laying flat.? And where did you get 25 degrees
BRILLIANT, great music. 😂
🥰
How are you supposed to know where to hold to chalk line, on the pencil marks? everything else makes sense
Hi there, yes. The purpose of this is to create a connected line between your pencil marks 😊
At the top of both measurements from the bottom of the stairs to the top of the stairs
That's correct 😊