@FindingNick got some steep competition. Love following this build. So meticulous and clean. Every mod has been tasteful and precise. Alot of thought was put in. Congratulations
TE37🔥 the concave💪 got the black edition 3 18x9.5 +39 on PS4S in my 2015 STi, wraping up the 600whp+ build, miss your STi man, but that BMW M series its on another level for sure, eager to see more
Have the same set up! Te37SL w/ KW V3 and SPL toe, tractions, and Dinan monoball. Let’s just say it’s day and night difference! I do street driving but it handles so much better and you feel confident at high speed and corner driving. 😊
Be careful with summer tires, I’m sure you are aware. However, the east coast subaru community in PA, NJ, NY, and so on lost a good friend and enthusiast a week ago from hydroplaning on his r888’s. Stay safe
Appreciate the looking out. So sorry to hear about your friend. Fortunately, this car won’t see any type of precipitation so it’ll be tucked away in the garage for the colder months.
Looks great! Congrats on the TEs! Not gunna lie I am surprised you let them put silver wheel weights on there and not black lol. I remember when I bought my LM-Rs and I picked it up from the tire place they were so pumped to tell me they put black wheel weights on it and I felt bad so didn’t even say anything but what I wanted to say was yes thanks for remembering I normally like black wheel weights but not on a silver wheel lol 😂
@@Autofreakgarage been there before too! Last time I just ordered new ones and then just outlined them with some painters tape in the exact location and swapped them out. Can’t wait to see where your build goes from here
@christianperles9780 not a bad idea! Thanks I appreciate it. Car is much further along in real time than videos portray. Really looking forward to showing it all to everyone. Been working hard into the wee hours of the morning getting this car to my standards and vision.
Any reason you didn’t/aren’t going with Exo V5? I started looking at Exo V4 from your video awhile back and then was officially sold after seeing more and more positive reviews and the general ‘warmer’ appearance it gives. I went to get it, but saw V5 was newly out! After doing CSL and just one coat of V5 (that’s all it requires) I can’t imagine doing yet another coat hahah.
Any other non extreme summer tires that you found has a nice square look? I have the ultra m-specs in gloss black, 19x9.5 +28 and found the same thing on the PS4S’ being too bubbly in the looks department. Beautifully performs, quiet, long lasting, but that bubble sidewall kills me and my fitment. Looking to get a nice square sidewall, but don’t want to get into 200tw territory as it is my daily…thoughts Scooby?
@@Autofreakgarage man you know how it is lol we're living in times where 500hp isn't even fast enough for the street. Things done changed, is what Im ultimately pointing out lol Us, being in our 30's 40's won't feel that way but the people coming after us sure do. They controlling what's "cool" now. Sidenote, there's plenty people casually throwing on larger sizes on the f-chassis lol
@FindingNick got some steep competition. Love following this build. So meticulous and clean. Every mod has been tasteful and precise. Alot of thought was put in. Congratulations
Te37 the world 🌎
Chris, these look sooo siiiccckkk! Great choice of tires for those wheels and we definitely can't wait to see them on the car!
Love watching the progress of your build!
Keep these videos up man lol giving me so much motivation for when I get my own F8x
Great taste, as always. The SL stickers on the lip looks awesome they would be great in blue to match the rest of the car
TE37🔥 the concave💪 got the black edition 3 18x9.5 +39 on PS4S in my 2015 STi, wraping up the 600whp+ build, miss your STi man, but that BMW M series its on another level for sure, eager to see more
you have great taste in wheels, I ended up putting ce28's on my sti after watching your series.
Great choice!
Have the same set up! Te37SL w/ KW V3 and SPL toe, tractions, and Dinan monoball. Let’s just say it’s day and night difference! I do street driving but it handles so much better and you feel confident at high speed and corner driving. 😊
Awesome! Thanks for the feedback.
Let us know how the Falken feels. I run 4S and Mickey’s on the rear but the cost is just too much and have been looking for options.
I just bought some Advan TC4’s for my wrx. Going to try that sealant before I put them on. My wheels are indigo blue.
Nice! Yes, the coating will help keep the wheels cleaner longer. Worth the work!
Can’t wait to see these mounted.
In love. The wheels looking so sick!
Be careful with summer tires, I’m sure you are aware. However, the east coast subaru community in PA, NJ, NY, and so on lost a good friend and enthusiast a week ago from hydroplaning on his r888’s. Stay safe
Appreciate the looking out. So sorry to hear about your friend.
Fortunately, this car won’t see any type of precipitation so it’ll be tucked away in the garage for the colder months.
I’m just starting to watch your channel and I watched the verus rear difusser video but did you get rid of your STI for the BMW?
🔥🔥 That set up looks so good!
What power washer do you use? Are you able to link it?
bit.ly/3RKr0oD
Set up looks thick! Surprised you didn't do black wheel weights that's my OCD kicking in
Already taken care of 👍🏻
As expected .. just subbed. Just ordered a custom set of BBS three piece for my F82. Contemplated TE's also but my dream set was the BBS
@edcam4748 very nice! And thanks for the support.
Looks great! Congrats on the TEs! Not gunna lie I am surprised you let them put silver wheel weights on there and not black lol. I remember when I bought my LM-Rs and I picked it up from the tire place they were so pumped to tell me they put black wheel weights on it and I felt bad so didn’t even say anything but what I wanted to say was yes thanks for remembering I normally like black wheel weights but not on a silver wheel lol 😂
Haha they were out of black. I ended up painting them though 👍🏻
@@Autofreakgarage been there before too! Last time I just ordered new ones and then just outlined them with some painters tape in the exact location and swapped them out. Can’t wait to see where your build goes from here
@christianperles9780 not a bad idea! Thanks I appreciate it. Car is much further along in real time than videos portray. Really looking forward to showing it all to everyone. Been working hard into the wee hours of the morning getting this car to my standards and vision.
Any reason you didn’t/aren’t going with Exo V5? I started looking at Exo V4 from your video awhile back and then was officially sold after seeing more and more positive reviews and the general ‘warmer’ appearance it gives. I went to get it, but saw V5 was newly out! After doing CSL and just one coat of V5 (that’s all it requires) I can’t imagine doing yet another coat hahah.
Csl/evo doesn’t hold up to heat well. I love it on paint, but for wheels, brakes, plastics…. Dlux does very well.
Any other non extreme summer tires that you found has a nice square look? I have the ultra m-specs in gloss black, 19x9.5 +28 and found the same thing on the PS4S’ being too bubbly in the looks department. Beautifully performs, quiet, long lasting, but that bubble sidewall kills me and my fitment. Looking to get a nice square sidewall, but don’t want to get into 200tw territory as it is my daily…thoughts Scooby?
Check the continental dw’s. Not as bubbly as the Michelins, good tire wear, and perform well.
Soo good man.
I may have missed it in your posted list of products but what are the details on the small mitt you used to wash the wheels?
bit.ly/46udXfk
Does the Dlux give off a glossy finish? Nd how has it been holding up so far?
Not glossy, just a deeper finish. Been holding up well. Still beading well.
Love u dude
With the V3’s you get rid of the EDC for you car, are you concerned about loosing that?
Video coming out on what and why I chose what I chose. I go into detail of edc and the direction I am heading.
@@Autofreakgarage Great! Looking forward to it.
Sheeesh 🤙🏽
Im interested in the KW H.A.S. kit, is it still for sale?
Sorry man. Been sold for a few months now. It went quickly.
How do you take the coat off if you install the wheel sticker?
th-cam.com/video/ffQ-42KCfeQ/w-d-xo.htmlsi=utlYiJVnLAe8bRFg
what's the best way to remove the red te37 sl decal under the valve stem?
Heat and peel
Do you spray the goo gone directly on the wheel or on a rag?
Spray it on a towel first. Much easier to control than spraying everywhere.
Can this ceramic coat be applied on painted plastic like the bumper?
Yes. Plastics and wheels is what this works best on. It does well with heat as opposed to normal ceramic.
Hi Chris are you running 265/35 in on front ? 295/30 in rear? is that for a fitment issue?
Yes and no fitment issues
@@Autofreakgarage how do you like those tires ?
Very happy with them. Tons of grip and look awesome.
@@Autofreakgarage why 35 in front and 30 in rear sorry for all the questions
Staggered setup with wider rear requires a lower series tire to keep OD tire ratio the same as oem.
👌🏼
Not to be OCD but get you some black titanium valve stem covers lol. I got mine from Titanium Works
Where do you get the wheels at?
Envision Tuning
What car cover are you using?
th-cam.com/video/5W6_SGpktF4/w-d-xo.htmlsi=bsNDGZmfsuVk9B7G
lmao you're just use to 265's being on the subie. Nowadays 295's are skinny.
Wouldn’t say 295’s are skinny haha, but yes people do use larger sizes these days on other applications.
@@Autofreakgarage man you know how it is lol we're living in times where 500hp isn't even fast enough for the street. Things done changed, is what Im ultimately pointing out lol Us, being in our 30's 40's won't feel that way but the people coming after us sure do. They controlling what's "cool" now. Sidenote, there's plenty people casually throwing on larger sizes on the f-chassis lol