Your videos are great! Even though I'm not interested in some topics I keep watching. Your knowledge and skill to pass it down is amazing! Never stop helping us!
I have this type of Token BB for my Winspace frame. I like it. have not had any problems with it. The one I received did not come with the shims but instead came with a 2.5mm spacer.
hi, I ordered a T1500 Winspace frame and I want to install a Token BB86 thread fit on it and an Ultegra Di2 12 v groupset, may I need some shims or spacers or it works without nothing? thanks, cheers from Italy
What is the process if you have to remove this full BB? From this video it appeared that both sides had normal threads, tightened to the right, so I assume with tools on both sides it would loosen to the left. I saw your other video of replacing the bearings. In
Depends usually on the roundness of the carbon finish on the frame. Many frames(even expensive ones) aren't machined that well which causes pressfit BB's to creak due to an unround hole and poor fit.
The shims will protect the frame from rubbing with the tool or the CNC notches of the BB. Mine did not have the sims, only the spacers. If I had them I would put them because I don't trust the CNC finish of the 16 notches.
@@panagisloukatos7799 thank you. I had some problem to fit the Ninja (very hard to install), but probably was the fault of small diameter of the BB on my frame
Your videos are the best, real world tutorials!
Your videos are great! Even though I'm not interested in some topics I keep watching. Your knowledge and skill to pass it down is amazing! Never stop helping us!
Very well explain as always.Merci!
I have this type of Token BB for my Winspace frame. I like it. have not had any problems with it. The one I received did not come with the shims but instead came with a 2.5mm spacer.
hi, I ordered a T1500 Winspace frame and I want to install a Token BB86 thread fit on it and an Ultegra Di2 12 v groupset, may I need some shims or spacers or it works without nothing? thanks, cheers from Italy
@@jdpowell69 I installed the BB without the shims and have had zero problems with it.
@@wrosado71 thanks a lot, cheers
Well done.
Great explanation and video content
Esté sistema es compatible con mi bicicleta Fiji de carretera modelo gran fondo 2012 gracias
Thanks for the video! What are the tools used here?
Can I install this one at Cervelo bright 46x79mm?
Great explanation, do you know what size tool is needed for a 41 diameter shell.....?
Thanks.
Tks👍👏🏻
Thank you for you informative video! I see it is packaged with the bearings already inside. Is it possible to get the bearings out?
Token Ninja BB386 Bearing Change
th-cam.com/video/2FJ5Yj9FW2g/w-d-xo.html
What is the process if you have to remove this full BB? From this video it appeared that both sides had normal threads, tightened to the right, so I assume with tools on both sides it would loosen to the left. I saw your other video of replacing the bearings. In
Absolute Belter You Pal.🎉😂
To minimize any BB creaking noise, Threaded BBs all day compared to PressFit BBs right?
Depends usually on the roundness of the carbon finish on the frame. Many frames(even expensive ones) aren't machined that well which causes pressfit BB's to creak due to an unround hole and poor fit.
great explanation, why do you put the shims on the BB sides? Cheers from Italy
The shims will protect the frame from rubbing with the tool or the CNC notches of the BB. Mine did not have the sims, only the spacers. If I had them I would put them because I don't trust the CNC finish of the 16 notches.
@@panagisloukatos7799 thank you. I had some problem to fit the Ninja (very hard to install), but probably was the fault of small diameter of the BB on my frame
I'm thinking to do this for my Trek (BB90, junk of a BB), I can see the Pros but are there any cons? i.e. the bearing is too small etc?
Hello what exactly crankset you have is possible to give me specs and how many speed thanks good video
How can remove only bearing?
Hi what park tool name please? Both tool name please thanks