Just a FYI....you can use a carpenter's pencil for the resistor. Just sharpen both ends of the graphite pencil and it will act as a pretty good resistor. My high tech Lowe's one measures about 14 ohms.
I am confused as how you get 100+ah's with battery at 80% charge V. Because to get battery fully charged you need a bench power supply. That gets it to 100% state of charge. 14.6v to be exact. But your video clearly shows you getting the 100+ahs with 80% state of charge. Pretty amazing. And by no means am i being sarcastic. I love your channel.
The battery was at 100%. You charge it at 14.6V but it doesn't stay at 14.6. It will go down to 13.3V after you disconnect the charger. And when you put a load on it (10A in this case), it will immediately go down to 12.8V.
When you was using the resistor to connect the inverter to the battery. I do the same thing as you do but my question is could I leave the resistor on the wire permanently? + Won't have to worry about forgetting it
Thank you for the video I’m thinking about buying 3 of these for my old 1988 golf cart 36v I’m not sure if I should get 3 of these or one 36v battery ... what do you think is better option?
12v 100ah are the cheapest. But may need to be charged individually some times to balance them. 36v charger will work but charging will stop once one battery is full even if the other battery’s are not full. They may only need individual charging once a year, who knows
@@vuaeco thank you for the reply I’ll probably go with the 36v 100ah that comes with the charger and Bluetooth Amazon has the “LOSSIGY” brand on sale for $679👍 Happy New Year!!!
@@vuaeco3 battery in serie da 100amper 12.8volt ecoworty con bms included no problem in serie 38.4volt nominal and charge max 41.7volt bulk is ok and 41.4volt float
Bonjour Vous êtes le fabricant ? En tous les cas teste extrême !. Teste de température et fonctionnement parfait. Le raviver ou réveiller le bms : Bon conseils 👍. Par contre ne brancher pas ce type de batterie sur l’alternateur d’une voiture qui lui monte à 15,5 volts. Solution : mettre un consommateur avant la batterie ???. Si quelqu’un à un meilleur conseil. Merci
Odd that you would review a battery and not provide a link to it. I did find the battery, and it's quite a bit more expensive than other well known brands such as Power Queen, Li-Time, and Watt Cycle.
these are the kind of tests i would like to do on my battery, but would be too scared to
thanks for the video, really informative
Just a FYI....you can use a carpenter's pencil for the resistor. Just sharpen both ends of the graphite pencil and it will act as a pretty good resistor. My high tech Lowe's one measures about 14 ohms.
I am confused as how you get 100+ah's with battery at 80% charge V. Because to get battery fully charged you need a bench power supply. That gets it to 100% state of charge. 14.6v to be exact. But your video clearly shows you getting the 100+ahs with 80% state of charge. Pretty amazing. And by no means am i being sarcastic. I love your channel.
The battery was at 100%. You charge it at 14.6V but it doesn't stay at 14.6. It will go down to 13.3V after you disconnect the charger. And when you put a load on it (10A in this case), it will immediately go down to 12.8V.
12:43 I would assume that cell is a lithium rechargeable cell, I also assume it is used to keep the time clock chip powered up.
nice review. it would be good to state the wire gauge too. Also what was that PCB on top of the battery
nice review
Yay, "no spark!" 😁
subscribed.
very informational👍
Essa bateria de 3v na BMS é para alimentar a memória da BMS igual tem na placa mãe de um computador.
When you was using the resistor to connect the inverter to the battery. I do the same thing as you do but my question is could I leave the resistor on the wire permanently? + Won't have to worry about forgetting it
You can't leave that resistor on the wire. When you pull over 100 Amps through it, it will light up like a light bulb and then kaboom...
Thank you for the video I’m thinking about buying 3 of these for my old 1988 golf cart 36v I’m not sure if I should get 3 of these or one 36v battery ... what do you think is better option?
I would get one 36V battery. Having 3 of these 12V in series poses a problem when you need to charge them because each is run by its own BMS.
12v 100ah are the cheapest. But may need to be charged individually some times to balance them. 36v charger will work but charging will stop once one battery is full even if the other battery’s are not full. They may only need individual charging once a year, who knows
@@vuaeco thank you for the reply I’ll probably go with the 36v 100ah that comes with the charger and Bluetooth Amazon has the “LOSSIGY” brand on sale for $679👍
Happy New Year!!!
@@vuaeco3 battery in serie da 100amper 12.8volt ecoworty con bms included no problem in serie 38.4volt nominal and charge max 41.7volt bulk is ok and 41.4volt float
Buk lao make excellent review
real
That is a very interesting accent
He sounds like Uncle Roger impersonating Nelson Mandela
Bonjour
Vous êtes le fabricant ?
En tous les cas teste extrême !.
Teste de température et fonctionnement parfait.
Le raviver ou réveiller le bms :
Bon conseils 👍.
Par contre ne brancher pas ce type de batterie sur l’alternateur d’une voiture qui lui monte à 15,5 volts.
Solution : mettre un consommateur avant la batterie ???.
Si quelqu’un à un meilleur conseil.
Merci
First
Odd that you would review a battery and not provide a link to it. I did find the battery, and it's quite a bit more expensive than other well known brands such as Power Queen, Li-Time, and Watt Cycle.
Good ecoworty on dchouse for 200euro for 100amper 12.8volt lifepo4 is good and interior celle 3.2v 100amper rept good
Where is link to secret sauce glue, please?
Link to home made glue: th-cam.com/video/iUqscl4EGxQ/w-d-xo.html